Search NASA⌕ Search

Engineering topics

Strmcnik, Dusan

Publications and source records attributed to Strmcnik, Dusan.

At least 37 records · Page 2

Stationary probe rotating disk electrode

A stationary probe having a probe holder and a probe with a probe tip. The stationary probe may be part of a stationary probe rotating disk electrode wherein the stationary probe has a passage therethrough for rotatably receiving a rotating disk electrode comprising a rotating shaft, rotatable about a longitudinal axis, and having an electrode portion extending therefrom configured to receive an electrode. The stationary probe rotating disk electrode may be part of an analytical system wherein the probe tip includes a capillary entrance spaced apart from the electrode and connected to an analyte flow path.

Lopes, Pietro Papa↗

Real-Time Monitoring of Cation Dissolution/Deintercalation Kinetics from Transition-Metal Oxides in Organic Environments

The future of high-voltage rechargeable batteries is closely tied to the fundamental understanding of the processes that lead to the potential-dependent degradation of electrode materials and organic electrolytes. To date, however, there have been no methods able to provide quantitative, in situ and in real time information about the electrode dissolution kinetics and concomitant electrolyte decomposition during charge/discharge. We describe the development of such a method, which is of both fundamental and technological significance. Our novel approach enables simultaneous and independent measurements of transition-metal cation dissolution rates from different oxide hosts (Co 3+/4+ or Cr 3+/4+ ), deintercalation kinetics of working cations (Mg 2+ ), and the relative rate of electrolyte decomposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrocatalytic transformation of HF impurity to H 2 and LiF in lithium-ion batteries

The formation of solid electrolyte interphase on graphite anodes plays a key role in the efficiency of Li-ion batteries. However, to date, fundamental understanding of the formation of LiF as one of the main solid electrolyte interphase components in hexafluorophosphate-based electrolytes remains elusive. In this paper, we present experimental and theoretical evidence that LiF formation is an electrocatalytic process that is controlled by the electrochemical transformation of HF impurity to LiF and H 2 . Although the kinetics of HF dissociation and the concomitant production of LiF and H 2 is dependent on the structure and nature of surface atoms, the underlying electrochemistry is the same. The morphology, and thus the role, of the LiF formed is strongly dependent on the nature of the substrate and HF inventory, leading to either complete or partial passivation of the interface. Finally, our finding is of general importance and may lead to new opportunities for the improvement of existing, and design of new, Li-ion technologies.

25 ENERGY STORAGE↗

Dynamics of electrochemical Pt dissolution at atomic and molecular levels

Understanding and controlling electrochemical interfaces at atomic and molecular levels have transformed electrochemistry into a science with clearly defined fundamental principles leading to significant impact on various electrochemical systems and devices. Although the principles guiding the activity of electrochemical reactions are quite well established, the driving forces that control stability are still poorly understood. Here we utilize in situ monitoring of the early stages of Pt dissolution using the stationary probe rotating disk electrode technique coupled to inductively coupled plasma mass spectrometry (SPRDE-ICPMS). Our unique SPRDE-ICPMS method provides picogram sensitivity levels that, in combination with STM, provide otherwise inaccessible information about the dissolution and redeposition of Pt(111) in acidic environments. We propose two distinct dissolution mechanisms that are active during oxide formation and subsequent oxide reduction. Whereas an electrochemical dissolution mechanism is observed during anodic Pt dissolution (Pt→Pt 2+ +2e - ), a combination of electrochemical (PtO*+2H + +2e - →Pt 0 +H 2 O) and chemical (PtO*+2H + →Pt 2+ +H 2 O) steps control the dissolution of Pt during the cathodic scan. The redeposition of Pt (Pt 2+ +2e - →Pt) observed on the cathodic scan is controlled by a delicate balance between the diffusion of Pt 2+ from the double layer and redeposition of Pt 2+ on Pt oxide-free sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energy and fuels from electrochemical interfaces

Advances in electrocatalysis at solid–liquid interfaces are vital for driving the technological innovations that are needed to deliver reliable, affordable and environmentally friendly energy. Here, in this paper, we highlight the key achievements in the development of new materials for efficient hydrogen and oxygen production in electrolysers and, in reverse, their use in fuel cells. A key issue addressed here is the degree to which the fundamental understanding of the synergy between covalent and non-covalent interactions can form the basis for any predictive ability in tailor-making real-world catalysts. Common descriptors such as the substrate–hydroxide binding energy and the interactions in the double layer between hydroxide-oxides and H---OH are found to control individual parts of the hydrogen and oxygen electrochemistry that govern the efficiency of water-based energy conversion and storage systems. Lastly, links between aqueous- and organic-based environments are also established, encouraging the 'fuel cell' and 'battery' communities to move forward together.

25 ENERGY STORAGE↗

Tuning the Reversibility of Mg Anodes via Controlled Surface Passivation by H 2 O/Cl – in Organic Electrolytes

Developing a new generation of battery chemistries is a critical challenge to moving beyond current Li-ion technologies. In this work, we introduce a surface-science-based approach for understanding the complex phenomena controlling the reversibility of Mg anodes for Mg-ion batteries. In addition, we identify the profound impact of trace levels of H 2 O (≤3 ppm) on the kinetics of Mg deposition and determine that passive films of MgO and Mg(OH) 2 are formed only after Mg deposition ceases, rather than continuously during Mg reduction. We also find that Cl – inhibits passivation through the formation of adsorbed Cl – (Mg–Cl(ad)) and/or MgCl 2 on the surface, as well as through a dynamic competition with H 2 O in the double layer. In conclusion, this surface-science-based approach goes well beyond Mg anodes, highlighting the need for more in-depth understanding of electrolyte chemistries before a new generation of efficient and reversible battery technologies can be realized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design principles for hydrogen evolution reaction catalyst materials

Design and synthesis of active, stable and cost-effective materials for efficient hydrogen production (hydrogen evolution reaction, HER) is of paramount importance for the successful deployment of hydrogen -based alternative energy technologies. The HER, seemingly one of the simplest electrochemical reactions, has served for decades to bridge the gap between fundamental electrocatalysis and practical catalyst design. However, there are still many open questions that need to be answered before it would be possible to claim that design principles of catalyst materials are fully developed for the efficient hydrogen production. Here in this review, by summarizing key results for the HER on well-characterized electrochemical interfaces in acidic and alkaline media, we have broadened our understanding of the HER in the whole range of pH by considering three main parameters: the nature of the proton donor (H 3 O + in acid and H 2 O in alkaline), the energy of adsorption of H ad and OH ad , and the presence of spectator species. Simply by considering these three parameters we show that great deal has already been learned and new trends are beginning to emerge, giving some predictive ability with respect to the nature of electrochemical interface and electrocatalytic activity of the HER.

08 HYDROGEN↗

Relationships between Atomic Level Surface Structure and Stability/Activity of Platinum Surface Atoms in Aqueous Environments

The development of alternative energy systems for clean production, storage and conversion of energy is strongly dependent on our ability to understand, at atomic-molecular-levels, functional links between activity and stability of electrochemical interfaces. Whereas structure-activity relationships are rapidly evolving, the corresponding structure-stability relationships are still missing. Primarily, this is because there is no adequate experimental approach capable of monitoring in situ stability of well-defined single crystals. Here, by blending the power of Inductively Coupled Plasma-Mass Spectrometer (ICP-MS) connected to a stationary probe to measure in situ and real time dissolution rates of surface atoms (at above 0.4 pg cm-2s-1 levels) and a rotating disk electrode method for monitoring simultaneously the kinetic rates of electrochemical reactions in a single unite, it was possible to establish almost “atom-by-atom” the structure-stability-activity relationships for platinum single crystals in both acidic and alkaline environments. Furthermore, we found that the degree of stability is strongly dependent on the coordination of surface atoms (less coordinated yields less stable), the nature of covalent (adsorption of hydroxyl, oxygen atoms and halides species), and non-covalent interactions (interactions between hydrated Li cations and surface oxide), the thermodynamic driving force for Pt complexation (Pt ion speciation in solution) and the nature of the electrochemical reaction (the oxygen reduction/evolution and CO oxidation reactions). Consequently, these findings are opening new opportunities for elucidating key fundamental descriptors that govern both activity and stability trends, that ultimately, will assist to develop real energy conversion and storage systems.

36 MATERIALS SCIENCE↗

Superoxide (Electro)Chemistry on Well-Defined Surfaces in Organic Environments

Efficient chemical transformations in energy conversion and storage systems depend on understanding superoxide anion (O 2 – ) electrochemistry at atomic and molecular levels. Here, in this work, a combination of experimental and theoretical techniques are used for rationalizing, and ultimately understanding, the complexity of superoxide anion (electro)chemistry in organic environments. By exploring the O 2 + e – ↔ O 2 – reaction on well-characterized metal single crystals (Au, Pt, Ir), Pt single crystal modified with a single layer of graphene (Graphene@Pt(111)), and glassy carbon (GC) in 1,2 dimethoxyethane (DME) electrolytes, we demonstrate that (i) the reaction is an outer-sphere process; (ii) the reaction product O 2 – can “attack” any part of the DME molecule, i.e., the C–O bond via nucleophilic reaction and the C–H bond via radical hydrogen abstraction; (iii) the adsorption of carbon-based decomposition products and the extent of formation of a “solid electrolyte interface” (“SEI”) increases in the same order as the reactivity of the substrate, i.e., Pt(hkl)/Ir(hkl) » Au(hkl)/GC > Gaphene@Pt(111); and (iv) the formation of the “SEI” layer leads to irreversible superoxide electrochemistry on Pt(hkl) and Ir(hkl) surfaces. In conclusion, we believe this fundamental insight provides a pathway for the rational design of stable organic solvents that are urgently needed for the development of a new generation of reliable and affordable battery systems.

25 ENERGY STORAGE↗

Design of active and stable Co-Mo-S x chalcogels as pH-universal catalyst for the hydrogen evolution reaction

Three of the fundamental catalytic limitations that have plagued the electrochemical production of hydrogen for decades still remain: low efficiency, short lifetime of catalysts and a lack of low-cost materials. Here, we address these three challenges by establishing and exploring an intimate functional link between the reactivity and stability of crystalline (CoS 2 and MoS 2 ) and amorphous (CoS x and MoS x ) hydrogen evolution catalysts. We propose that Co 2+ and Mo 4+ centers promote the initial discharge of water (alkaline solutions) or hydronium ions (acid solutions). We establish that although CoS x materials are more active than MoS x they are also less stable, suggesting that the active sites are defects formed after dissolution of Co and Mo cations. Finally, by combining the higher activity of CoS x building blocks with the higher stability of MoS x units into a compact and robust CoMoS x structure, we are able to design a low-cost alternative to noble metal catalysts for efficient electrocatalytic production of hydrogen in both alkaline and acidic environments.

36 MATERIALS SCIENCE↗

When small is big: the role of impurities in electrocatalysis.

Improvements in the fundamental understanding of electrocatalysis have started to revolutionize the development of electrochemical interfaces for the efficient conversion of chemical energy into electricity, as well as for the utilization of electrons to produce new chemicals that then can be re-used in energy conversion systems. Here, some facets of the role of trace level of impurities (from 10-7 to 10-6 M) in electrocatalysis of the oxygen reduction reaction, hydrogen oxidation and evolution reactions, and CO oxidation reactions are explored on well-characterized platinum single crystal surfaces and high surface area materials in alkaline and acidic environments. Of particular interest is the effect of anions (e.g., Cl-, NO3-) and cations (i.e., Cu2+) present in the supporting electrolytes as well as surface defects (i.e., ad-islands) that are present on metal surfaces. The examples presented are chosen to demonstrate that a small level of impurities may play a crucial role in governing the reactivity of electrochemical interfaces.

Strmcnik, Dusan↗

Double layer effects in electrocatalysis: The oxygen reduction reaction and ethanol oxidation reaction on Au(111), Pt(111) and Ir(111) in alkaline media containing Na and Li cations

Oxygen reduction and ethanol oxidation reactions were studied on Au(111), Pt(111) and Ir(111) in alkaline solutions containing sodium and/or lithium cations. By keeping the same (111) surface orientation and exploring oxophilicity trends and non-covalent interactions between OH ad and alkali metal cations (AMC n+ ), we were able to gain deep insights into the multiple roles that OH ad plays in these important electrocatalytic reactions. Cyclic voltammetry experiments revealed that OH ad formation initiates at distinct electrode potentials, governed by the oxophilicity of the specific metal surface, with further OH ad adlayer stabilization by non-covalent alkali-cation interactions and affecting the formation of a “true oxide” layer at higher electrode potentials. Although OH ad is a simple spectator for the ORR, it promotes the ethanol oxidation reaction (EOR) at lower potentials and act as spectator at high OHad coverages. By changing the alkali metal cation at the interface (Li + ) on more oxophilic surfaces, it was possible to promote the EOR even more, relative to Na + , without changing the product distribution for the reaction. This cation effect suggests that OH ad —Li + (H 2 O) x clusters can stabilize the ethoxide adlayer, thus improving the EOR activity. Finally, our results indicate the importance of the entire electrochemical interface in determining the electrocatalytic activity during reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fuel cell electrodes

A process includes patterning a surface of a platinum group metal-based electrode by contacting the electrode with an adsorbate to form a patterned platinum group metal-based electrode including platinum group metal sites blocked with adsorbate molecules and platinum group metal sites which are not blocked.

30 DIRECT ENERGY CONVERSION↗

Activity–Stability Trends for the Oxygen Evolution Reaction on Monometallic Oxides in Acidic Environments

In the present study, we used a surface-science approach to establish a functional link between activity and stability of monometallic oxides during the OER in acidic media. We found that the most active oxides (Au< >Pt>Ir>Ru>>Os) materials. We suggest that the relationships between stability and activity are controlled by both the nobility of oxides as well as by the density of surface defects. This functionality is governed by the nature of metal cations and the potential transformation of stable metal cation with a valance state of n= +4 to unstable metal cation with n > +4. A practical consequence of such a close relationship between activity and stability is that the best materials for the OER should balance stability and activity in such a way that the dissolution rate is neither too fast nor too slow.

Danilovic, Nemanja↗