Depth-Resolved Profile of the Interfacial Ferromagnetism in CaMnO 3 /CaRuO 3 Superlattices
Not Available
Engineering topics
Publications and source records attributed to Strocov, Vladimir N..
Not Available
Not Available
Not Available
Abstract Kagome magnets provide a fascinating platform for a plethora of topological quantum phenomena, in which the delicate interplay between frustrated crystal structure, magnetization, and spin–orbit coupling (SOC) can engender highly tunable topological states. Here, utilizing angle‐resolved photoemission spectroscopy, the Weyl lines are directly visualized with strong out‐of‐plane dispersion in the A–A stacked kagome magnet GdMn 6 Sn 6 . Remarkably, the Weyl lines exhibit a strong magnetization‐direction‐tunable SOC gap and binding energy tunability after substituting Gd with Tb and Li, respectively. These results not only illustrate the magnetization direction and valence counting as efficient tuning knobs for realizing and controlling distinct 3D topological phases, but also demonstrate AMn 6 Sn 6 (A = rare earth, or Li, Mg, or Ca) as a versatile material family for exploring diverse emergent topological quantum responses.
Quantum phases can be classified by topological invariants, which take on discrete values capturing global information about the quantum state. Over the past decades, these invariants have come to play a central role in describing matter, providing the foundation for understanding superfluids, magnets, the quantum Hall effect, topological insulators, Weyl semimetals and other phenomena. Here we report an unusual linking-number (knot theory) invariant associated with loops of electronic band crossings in a mirror-symmetric ferromagnet. Using state-of-the-art spectroscopic methods, we directly observe three intertwined degeneracy loops in the material's three-torus, T 3 , bulk Brillouin zone. We find that each loop links each other loop twice. Through systematic spectroscopic investigation of this linked-loop quantum state, we explicitly draw its link diagram and conclude, in analogy with knot theory, that it exhibits the linking number (2, 2, 2), providing a direct determination of the invariant structure from the experimental data. Here we further predict and observe, on the surface of our samples, Seifert boundary states protected by the bulk linked loops, suggestive of a remarkable Seifert bulk-boundary correspondence. Our observation of a quantum loop link motivates the application of knot theory to the exploration of magnetic and superconducting quantum matter.
Layered transition metal dichalcogenides have a rich phase diagram and they feature two-dimensionality in numerous physical properties. Co 1/3 NbS 2 is one of the newest members of this family where Co atoms are intercalated into the van der Waals gaps between NbS 2 layers. Here, we study the three-dimensional electronic band structure of Co 1/3 NbS 2 using both surface and bulk sensitive angle-resolved photoemission spectroscopy. We show that the electronic bands do not fit into the rigid band shift picture after the Co intercalation. Instead, Co 1/3 NbS 2 displays a different orbital character near the Fermi level compared to the pristine NbS 2 compound and has a clear band dispersion in the k z direction despite its layered structure. Our photoemission study demonstrates the out-of-plane electronic correlations introduced by the Co intercalation, thus offering a different perspective on this compound. Finally, we propose how Fermi level tuning could lead to exotic phases such as spin density wave instability.
It has been well established experimentally that the interplay of electronic correlations and spin-orbit interactions in Ir 4+ and Ir 5+ oxides results in insulating J eff = 1/2 and J eff = 0 ground states, respectively. However, in compounds where the structural dimerization of iridium ions is favorable, the direct Ir d-d hybridization can be significant and takes a key role. Here, in this study, we investigate the effects of direct Ir d-d hybridization in comparison with electronic correlations and spin-orbit coupling in Ba 5 AlIr 2 O 11 , a compound with Ir dimers. Using a combination of ab initio many-body wave-function quantum chemistry calculations and resonant inelastic x-ray scattering experiments, we elucidate the electronic structure of Ba 5 AlIr 2 O 11 . We find excellent agreement between the calculated and the measured spin-orbit excitations. Contrary to expectations, the analysis of the many-body wave function shows that the two Ir (Ir 4+ and Ir 5+ ) ions in the Ir 2 O 9 dimer unit in this compound preserve their local J eff character close to 1/2 and 0, respectively. The local point group symmetry at each of the Ir ions plays an important role, significantly limiting the direct d-d hybridization. Our results emphasize that minute details in the local crystal field environment can lead to dramatic differences in the electronic states in iridates and 5d oxides in general.
The electronic structure of surfaces plays a key role in the properties of quantum devices. However, surfaces are also the most challenging to simulate and engineer. Here, in this work, the electronic structure of InAs(001), InAs(111), and InSb(110) surfaces is studied using a combination of density functional theory (DFT) and angle-resolved photoemission spectroscopy (ARPES). Large-scale first principles simulations are enabled by using DFT calculations with a machine-learned Hubbard U correction [npj Comput. Mater. 6, 180 (2020)]. To facilitate direct comparison with ARPES results, a “bulk unfolding” scheme is implemented by projecting the calculated band structure of a supercell surface slab model onto the bulk primitive cell. For all three surfaces, a good agreement is found between DFT calculations and ARPES. For InAs(001), the simulations clarify the effect of the surface reconstruction. Different reconstructions are found to produce distinctive surface states, which may be detected by ARPES with low photon energies. For InAs(111) and InSb(110), the simulations help elucidate the effect of oxidation. Owing to larger charge transfer from As to O than from Sb to O, oxidation of InAs(111) leads to significant band bending and produces an electron pocket, whereas oxidation of InSb(110) does not. The combined theoretical and experimental results may inform the design of quantum devices based on InAs and InSb semiconductors, for example, topological qubits utilizing the Majorana zero modes.
Electron-phonon coupling, i.e., the scattering of lattice vibrations by electrons and vice versa, is ubiquitous in solids and can lead to emergent ground states such as superconductivity and charge-density wave order. A broad spectral phonon line shape is often interpreted as a marker of strong electron-phonon coupling associated with Fermi surface nesting, i.e., parallel sections of the Fermi surface connected by the phonon momentum. Alternatively broad phonons are known to arise from strong atomic lattice anharmonicity. Here, we show that strong phonon broadening can occur in the absence of both Fermi surface nesting and lattice anharmonicity, if electron-phonon coupling is strongly enhanced for specific values of electron-momentum, k. We use inelastic neutron scattering, soft x-ray angle-resolved photoemission spectroscopy measurements and ab-initio lattice dynamical and electronic band structure calculations to demonstrate this scenario in the highly anisotropic tetragonal electron-phonon superconductor YNi 2 B 2 C. This new scenario likely applies to a wide range of compounds.
Not Available
Anion ordering is a promising route to engineer physical properties in functional heteroanionic materials. A central challenge in the study of anion-ordered compounds lies in developing robust synthetic strategies to control anion occupation and in understanding the resultant implications for electronic structure. Here, we show that epitaxial strain induces preferential occupation of F and O on the anion sites in perovskite oxyfluorides SrMn O2.5-δ F γ films grown on different substrates. Under compressive strain, F tends to occupy the apical-like sites, which was revealed by F and O K-edge linearly polarized x-ray absorption spectroscopy and density functional theory calculations, resulting in an enhanced c-axis expansion. Under tensile strain, F tends to occupy the equatorial-like sites, enabling the longer Mn-F bonds to lie within the plane. The oxyfluoride films exhibit a significant orbital polarization of the 3d electrons, distinct F-site dependence to their valence band density of states, and an enhanced resistivity when F occupies the apical-like anion site compared to the equatorial-like site. By demonstrating a general strategy for inducing preferential anion-site occupancy in oxyfluoride perovskites, this work lays the foundation for future materials design and synthesis efforts that leverage this greater degree of atomic control to realize new polar or quasi-two-dimensional materials.
Interaction effects can change materials properties in intriguing ways, and they have, in general, a huge impact on electronic spectra. In particular, satellites in photoemission spectra are pure many-body effects, and their study is of increasing interest in both experiment and theory. However, the intrinsic spectral function is only a part of a measured spectrum, and it is notoriously difficult to extract this information, even for simple metals. Our joint experimental and theoretical study of the prototypical simple metal aluminum demonstrates how intrinsic satellite spectra can be extracted from measured data using angular resolution in photoemission. A nondispersing satellite is detected and explained by electron–electron interactions and the thermal motion of the atoms. Additional nondispersing intensity comes from the inelastic scattering of the outgoing photoelectron. The ideal intrinsic spectral function, instead, has satellites that disperse both in energy and in shape. Theory and the information extracted from experiment describe these features with very good agreement.
In the high spin–orbit-coupled Sr 2 IrO 4 , the high sensitivity of the ground state to the details of the local lattice structure shows a large potential for the manipulation of the functional properties by inducing local lattice distortions. We use epitaxial strain to modify the Ir–O bond geometry in Sr 2 IrO 4 and perform momentum-dependent resonant inelastic X-ray scattering (RIXS) at the metal and at the ligand sites to unveil the response of the low-energy elementary excitations. Furthermore, we observe that the pseudospin-wave dispersion for tensile-strained Sr 2 IrO 4 films displays large softening along the [h,0] direction, while along the [h,h] direction it shows hardening. This evolution reveals a renormalization of the magnetic interactions caused by a strain-driven cross-over from anisotropic to isotropic interactions between the magnetic moments. Moreover, we detect dispersive electron–hole pair excitations which shift to lower (higher) energies upon compressive (tensile) strain, manifesting a reduction (increase) in the size of the charge gap. This behavior shows an intimate coupling between charge excitations and lattice distortions in Sr 2 IrO 4 , originating from the modified hopping elements between the t 2g orbitals. Our work highlights the central role played by the lattice degrees of freedom in determining both the pseudospin and charge excitations of Sr 2 IrO 4 and provides valuable information toward the control of the ground state of complex oxides in the presence of high spin–orbit coupling.
Not provided.