Engineering topics

Stump, C. W.

Publications and source records attributed to Stump, C. W..

5 records

NASA NTRS1987

Digital solar edge tracker for the Halogen Occultation Experiment

The optical and electronic design of the Halogen Occultation Experiment (Haloe) elevation sun sensor is described. The Haloe instrument is a gas-correlation radiometer now being developed at NASA Langley for the Upper Atmosphere Research Satellite. The system uses a Galilean telescope to form a solar image on a linear silicon photodiode array. The array is a self-scanned monolithic CCD. The addresses of both solar edges imaged on the array are used by the control/pointing system to scan the Haloe science instantaneous field of view (IFOV) across the vertical solar diameter during instrument calibration and then to maintain the science IFOV 4 arcmin below the top edge during the science data occultation event. Vertical resolution of 16 arcsec and a radiometric dynamic range of 100 are achieved at the 700-nm operating wavelength. The design provides for loss of individual photodiode elements without loss of angular tracking capability.

Mauldin, L. E., III↗

NASA NTRS1984

Surface accuracy measurement sensor test on a 50-meter antenna surface model

The Surface Accuracy Measurement Sensor (SAMS) is a telescope with a focal plane photo electric detector that senses the lateral position of light source targets in its field of view. After extensive laboratory testing the engineering breadboard sensor system was installed and tested on a 30 degree segment of a 50-meter diameter, mesh surface, antenna model. Test results correlated well with the laboratory tests and indicated accuracies of approximately 0.59 arc seconds at 21 meters range. Test results are presented and recommendations given for sensor improvements.

Spiers, R. B.↗

NASA NTRS1982

Film advance indicator

A film advancement indicator which includes an optical sensor that detects the rotational movement of a disc that rotates only when the film advance is described. When the film does not advance, an indicator light is activated. A counter is included in the electronic circuit to determine the number of film frames advanced.

Freeman, E. T.↗

NASA NTRS1979

Film-advance monitor

Device checks film advancement in remote cameras by adding optoelectronic sensor and idler spocket with beam-breaker disk. Monitor is helpful to operators of cameras placed in hostile environments.

Dreisback, F. R.↗

NASA NTRS1979

Apparatus for measuring an aircraft's speed and height

An apparatus for measuring aircraft horizontal speed and height above ground without the need for airborne cooperative devices is presented. Two ground level TV cameras separated by a measured distance and pointed at zenith are placed in line with the projection of the expected path of the aircraft. Speed is determined by measuring the time that it takes the aircraft to travel between the fields of view of the two TV cameras using zenith crossings as the reference points. Height is determined by correlating the speed with the time required to cross the field of view of either of the two cameras.

Young, W. R.↗