Search NASA⌕ Search

Engineering topics

Su, AY

Publications and source records attributed to Su, AY.

6 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Flap-lag damping in hover and forward flight with a three-dimensional wake

Prediction of lag damping is difficult owing to the delicate balance of drag, induced drag and Coriolis forces in the in-plane direction. Moreover, induced drag is sensitive to dynamic wake, both shed and trailing components, and thus its prediction requires adequate unsteady-wake representation. Accordingly, rigid-blade flap-lag equations are coupled with a three-dimensional finite-state wake model; three isolated rotor configurations with three, four and five blades are treated over a range of thrust levels, Lock numbers, lag frequencies and advance ratios. The investigation includes convergence characteristics of damping with respect to the number of radial shape functions and harmonics of the wake model for multiblade modes of low frequency (less than 1/rev.) to high frequency (greater than 1/rev.). Predicted flap and lag damping levels are then compared with similar predictions with (1) rigid wake (no unsteady induced flow, (2) Loewy lift defficiency and (3) dynamic inflow. The coverage also includes correlations with the measured lag regressive-mode damping in hover and forward flight and comparisons with similar correlations with dynamic wake model are consistently higher than the predictions with the dynamic inflow model; even for the low frequency lag regressive mode, the number of wake harmonics should at least be equal to twice the number of blades.

Manjunath, A. R.↗
NASA NTRS1992

Extension and validation of an unsteady wake model for rotors

A new three-dimensional, finite-state induced-flow model is extended to treat nonlinearities associated with the mass flow induced through the rotor plane. This new theory is then applied to the correlation of a recent set of unsteady, hover laser Doppler velocimetry inflow measurements conducted in the Aeroelastic Rotor Test Chamber at Georgia Institute of Technology. Although the model is intended primarily as a representation of unsteady aerodynamics for aeroelasticity applications, the results show that it has an excellent capability in predicting the inflow distribution in hover except near the root and tip. In addition, the computed unsteady spanwise lift distribution of a rotor is compared with that from an unsteady vortex lattice method for pitch oscillations at various frequencies. The new model is shown to be capable of prediction of unsteady loads typical of aeroelastic response.

Su, AY↗
NASA NTRS1992

Flap-lag damping in hover and forward flight with a three-dimensional wake

Prediction of lag damping is difficult owing to the delicate balance of drag, induced drag and Coriolis forces in the in-plane direction. Moreover, induced drag is sensitive to dynamic wake, both shed and trailing components, and thus its prediction requires adequate unsteady-wake representation. Accordingly, rigid-blade flap-lag equations are coupled with a three-dimensional finite-state wake model; three isolated rotor configurations with three, four and five blades are treated over a range of thrust levels, Lock numbers, lag frequencies and advance ratios. The investigation includes convergence characteristics of damping with respect to the number of shape functions and harmonics of the wake model for multiblade modes of low frequency (less than 1/rev.) to high frequency (greater than l/rev.). Predicted flap and lag damping levels are then compared with similar predictions with (1) rigid wake (no unsteady induced flow), (2) Loewy lift deficiency, and (3) dynamic inflow.

Manjunath, A. R.↗
NASA NTRS1991

An integrated airloads-inflow model for use in rotor aeroelasticity and control analysis

The airloads-inflow model presented is ideally suited for rotor aeroelasticity and control analysis, especially where eigenvalues are sought. The model, which is derived from thin-airfoil theory with an extension that allows for other airfoil effects, is of hierarchical-lift type and may be simplified to any degree desired; the inflow is also expanded in shape functions which may be truncated to any desired texture. Both models are written in closed-form, state-variable equations without hidden states and without integrals over the wake.

Peters, David A.↗
NASA NTRS1989

The effect of an unsteady three-dimensional wake on elastic blade-flapping eigenvalues in hover

This paper describes the formulation of a finite-state inflow model based on an acceleration potential and a helical wake geometry. The states of the model are coefficients of an inflow expansion in terms of a Fourier series (azimuthally) and of special polynomials (radially). The integrals over the wake are done in closed-form to obtain a set of ordinary differential equations for the inflow coefficients. The forcing functions for these equations are generalized forces which are integrals of the blade loading exactly as in structural dynamics. This model implicitly includes (for the hover case) Prandtl-Goldstein tip losses, dynamic inflow, and Theodorsen/Loewy lift deficiency. Thus, it is a fully three-dimensional unsteady wake model. Here, this model is coupled with elastic-blade equations in hover and eigenvalues are found. The results show that the three-dimensional wake has a large effect on the flap damping of all modes.

Peters, David A.↗