Engineering topics

Suit, W. T.

Publications and source records attributed to Suit, W. T..

At least 19 records

NASA NTRS1986

Evaluation of a nonlinear parameter extraction mathematical model including the term C(subm(sub delta e squared))

Shuttle flight test data were used to determine values for the short-period parameters. The best identified, as judged by its estimated standard deviation, was the elevon effectiveness parameter C (sub m (sub sigma e squared)). However, the scatter about the preflight prediction of C (sub m (sub sigma e squared)) was large. Other investigators have suggested that adding nonlinear terms to the mathematical model used to identify C (sub m (sub sigma e)) could reduce the scatter. The results of this investigation show that C (sub m (sub sigma e squared)) is the only identifiable nonlinear parameter applicable and that the changes in C (sub m (sub sigma e)) values when C (sub m (sub sigma e squared)) is included are in the order of ten percent for the data estimated.

Suit, W. T.↗

NASA NTRS1986

Summary of longitudinal stability and control parameters as determined from space shuttle Columbia flight test data

Extensive wind tunnel tests were conducted to establish the preflight aerodynamics of the Shuttle vehicle. This paper presents the longitudinal, short-period aerodynamics of the space shuttle Columbia as determined from flight test data. These flight-determined results are compared with the preflight predictions, and areas of agreement or disagreement are noted. In addition to the short-period aerodynamics, the pitch RCS effectiveness was determined.

Suit, W. T.↗

NASA NTRS1986

Lateral and longitudinal aerodynamic stability and control parameters of the basic vortex flap research aircraft as determined from flight test data

The aerodynamics of the basic F-106B were determined at selected points in the flight envelope. The test aircraft and flight procedures were presented. Aircraft instrumentation and the data system were discussed. The parameter extraction procedure was presented along with a discussion of the test flight results. The results were used to predict the aircraft motions for maneuvers that were not used to determine the vehicle aerodynamics. The control inputs used to maneuver the aircraft to get data for the determination of the aerodynamic parameters were discussed in the flight test procedures. The results from the current flight tests were compared with the results from wind tunnel test of the basic F-106B.

Suit, W. T.↗

NASA NTRS1985

Supplement to the Shuttle aerodynamic database using Discovery flight tests

The Discovery vehicle was found to have longitudinal and lateral aerodynamic characteristics similar to those of the Columbia and Challenger vehicles. The lateral aerodynamic characteristics of the Columbia and Challenger vehicles are reiterated and the results from the Discovery flight test are added to this database. The longitudinal aerodynamics resulting from the analysis of flight data from all three vehicles is also shown. The values of the lateral and longitudinal parameters are compared with the preflight data book and this comparison is discussed.

Suit, W. T.↗

NASA NTRS1984

Proposed input for determining longitudinal aerodynamic parameters for the space shuttle

A control input form to improve the identification of longitudinal aerodynamic parameters for the Space Shuttle, especially at low Mach numbers, has been proposed. This input combines features of several inputs currently used with the Shuttle to improve the response in angle-of-attack without exceeding pitch rate limits. The responses of the proposed input were generated using a simple three-degree-of-freedom simulation. An examination of the power spectral densities of these responses showed them to have more power near the vehicle natural frequency than doublet inputs previously used with the Shuttle. When the responses to the proposed input were corrupted with noise and processed using a maximum likelihood parameter extraction program, the identifiability of the parameters was improved over the identifiability of the same parameters using actual Shuttle responses from doublet input of a similar magnitude. This preliminary study indicates that the proposed input form should result in improved identifiability of longitudinal static and control parameters for the Shuttle vehicle.

Suit, W. T.↗

NASA NTRS1984

Investigation of the effect of vehicle, angle-of-attack, and trim elevon position on lateral-directional aerodynamic parameters of the Shuttle Orbiter

This paper discusses the lateral-directional stability and control coefficients extracted from onboard measurements made during reentry of flights two to eight of the Space Shuttle Orbiters. Maximum likelihood estimation is applied to data derived from accelerometer and rate gyro measurements and trajectory, meteorological and control surface data to estimate these lateral-directional parameters. Comparison of estimated coefficients across the seven flights and two shuttle vehicles is made. The effect of the angle-of-attack, and trim elevon deflection on estimated values of the stability and control derivatives is also studied.

Schiess, J. R.↗

NASA NTRS1984

A program to form a multidisciplinary data base and analysis for dynamic systems

Diverse sets of experimental data and analysis programs have been assembled for the purpose of facilitating research in systems identification, parameter estimation and state estimation techniques. The data base analysis programs are organized to make it easy to compare alternative approaches. Additional data and alternative forms of analysis will be included as they become available.

Taylor, L. W.↗

NASA NTRS1983

Analysis of shuttle oscillation in the Mach Number = 1.7 to Mach Number = 1.0 range

The first five flights of the Space Transportation System (STS) have exhibited unexpected lateral oscillations in the Mach Number = 1.7 to Mach Number = 1.0 region of the descent trajectory. These oscillations can be split into two parts: a predominantly rolling oscillation referred to as the quarter hertz motion and a long-priod, large-amplitude oscillation in sideslips, roll rate, and yaw rate. These motions are analyzed in this paper in order to determine their source and the mechanism driving them. They will first be examined to determine how much of the motion can be explained using the set of equations that contain linear aerodynamic parameters. Then differences between measured moments and those calculated using linear aerodynamics which are considered to be due to unmodeled moments will be exained. Possible error sources such as not inluding nonlinear aerodynamics in the vehicle model, measurement errors, and the effect of pressure gradients will be considered. Based on these analyses, conclusions as to the nature and cause of the Shuttle lateral oscillations will be drawn.

Suit, W. T.↗

NASA NTRS1983

Stability and control over the supersonic and hypersonic speed range

The performance and aerodynamic characteristics of the Space Shuttle Columbia are analyzed over the speed range from Mach 2 to 26 using flight data taken from the first five Space Transportation System flights. These data are used to reconstruct the entry trajectory, calculate vehicle performance, and estimate lateral stability and control derivatives including those assocated with the onboard Reaction Control System. The trajectory reconstruction process is discussed in its relationship to the determination of the vehicle flight characteristics. Vehicle performance results are presented which show that lift and drag were generally overpredicted by 3 percent and that the life-to-drag ratio was underpredicted by 1 percent. Anomalies in pitching-moment trim characteristics are shown and noted to be due to real-gas and Mach-number effects. Lateral stability and control derivatives estimated using programmed test input maneuvers are corrected with preflight predictions and are usually within the uncertainties associated with the predictions. The lateral reaction-control system effectiveness is evaluated.

Compton, H. R.↗

NASA NTRS1983

Space Shuttle third flight /STS-3/ entry RCS analysis

Flight data obtained from three Space Transportation System orbiter entries (STS-1, 2, and 3) are processed and analyzed to determine the roll interactions caused by the firing of the entry reaction control system (RCS). Comparisons between the flight-derived parameters and the predicted derivatives without interaction effects are made. The flight-derived RCS Plume flow-field interaction effects are independently deduced by direct integration of the incremental changes in the wing upper surface pressures induced by RCS side thruster firings. The separately obtained interaction effects are compared to the predicted values and the differences are discussed.

Scallion, W. I.↗

NASA NTRS1983

Simplified analysis techniques to support the determination of Shuttle aerodynamics

The use of deterministic and regression methods to supplement the maximum likelihood estimation programs for the determination of the stability and control parameters of the Shuttle vehicle is discussed. Examples taken from STS-2 and STS-3 flight data show the use of deterministic methods to verify the effectiveness of the pitch and roll Reaction Control System (RCS), to verify the model structure used in the maximum likelihood estimator and to indicate regions of the descent trajectory where unmodeled moments dominate the vehicle motion and the application of maximum likelihood estimation would lead to incorrect parameter values. The use of regression methods to determine selected parameters when the more sophisticated maximum likelihood programs are not required, to determine the form of the vehicle mathematical model and to select the data time intervals for most effective parameter identification are also discussed.

Suit, W. T.↗

NASA NTRS1982

Shuttle entry performance and stability and control derivatives extraction from flight measurement data

Flight data taken from three Shuttle Space Transportation System flights (STS-1, 2, and 3) during entry are analyzed to determine the shuttle performance and aerodynamic characteristics. Correlations of the performance coefficients and the stability and control derivatives with preflight predictions are presented over the hypersonic speed range from Mach 2 to 25. In addition, an evaluation of the effectiveness of the onboard Reaction Control System (RCS) is given and an effort is made to independently quantify the combined impingement and flow-field interaction effects on the spacecraft rolling moment. Comparisons of stability and control derivatives extracted for the same flight conditions, but using data from different onboard sensors are also made. Results obtained using the same flight data, but different computer software are also shown.

Compton, H. R.↗

NASA NTRS1982

Spin tests of a single-engine, high-wing light airplane

The airplane has a relatively steep spin mode (low angle of attack) with a high load factor and high velocity. The airplane recovers almost immediately after any deviation from the prospin control positions, except for one maneuver with reduced flexibility in the elevator control system.

Stewart, E. C.↗

NASA NTRS1981

On matching the systems identification technique to the particular application

Several maximum likelihood and multiple regression parameter estimation programs are currently being used at the Langley Research Center of the NASA to analyze aircraft flight test data. Based on this wealth of experience, the pertinent features of these programs are investigated and some of the difficulties involved in their use are discussed. By comparing computational time, data requirements and accuracy needed, a strategy for determining which program can be used to the best advantage of the flight test engineer is discussed.

Suit, W. T.↗

NASA NTRS1979

Comparison of stability and control parameters for a light, single-engine, high-winged aircraft using different flight test and parameter estimation techniques

The longitudinal and lateral stability and control parameters for a high wing, general aviation, airplane are examined. Estimations using flight data obtained at various flight conditions within the normal range of the aircraft are presented. The estimations techniques, an output error technique (maximum likelihood) and an equation error technique (linear regression), are presented. The longitudinal static parameters are estimated from climbing, descending, and quasi steady state flight data. The lateral excitations involve a combination of rudder and ailerons. The sensitivity of the aircraft modes of motion to variations in the parameter estimates are discussed.

Suit, W. T.↗

NASA NTRS1977

Effects of control inputs on the estimation of stability and control parameters of a light airplane

The maximum likelihood parameter estimation technique was used to determine the values of stability and control derivatives from flight test data for a low-wing, single-engine, light airplane. Several input forms were used during the tests to investigate the consistency of parameter estimates as it relates to inputs. These consistencies were compared by using the ensemble variance and estimated Cramer-Rao lower bound. In addition, the relationship between inputs and parameter correlations was investigated. Results from the stabilator inputs are inconclusive but the sequence of rudder input followed by aileron input or aileron followed by rudder gave more consistent estimates than did rudder or ailerons individually. Also, square-wave inputs appeared to provide slightly improved consistency in the parameter estimates when compared to sine-wave inputs.

Cannaday, R. L.↗

NASA NTRS1977

Lateral aerodynamic parameters extracted from flight data for the F-8C airplane in maneuvering flight

Flight test data are used to extract the lateral aerodynamic parameters of the F-8C airplane at moderate to high angles of attack. The data were obtained during perturbations of the airplane from steady turns with trim normal accelerations from 1.5g to 3.0g. The angle-of-attack variation from trim was negligible. The aerodynamic coefficients extracted from flight data were compared with several other sets of coefficients, and the extracted coefficients resulted in characteristics for the Dutch roll mode (at the highest angles of attack) similar to those of a set of coefficients that have been the basis of several simulations of the F-8C.

Suit, W. T.↗

NASA NTRS1975

Extraction from flight data of longitudinal aerodynamic coefficients in maneuvering flight for F-8C aircraft

Flight-test data were used to extract the longitudinal aerodynamic parameters of the F-8C aircraft. The aircraft was trimmed in a steady turn at angles of attack of approximately 9 deg and 13 deg at Mach numbers of 0.7 and 0.8. The parameters extracted resulted in a good match to the flight data and the values obtained were reasonable. The values were further verified by comparing the period and time to damp to half-amplitude, as calculated by using the extracted parameter values, with the period and time to damp to half-amplitude actually measured from the flight data traces. These results show that for the set of data examined, a mathematical model using linear aerodynamics was adequate to describe the response motions at the test angles of attack.

Suit, W. T.↗