Engineering topics

Sullender, Craig C.

Publications and source records attributed to Sullender, Craig C..

9 records

NASA NTRS1996

Compensating For Friction In A Rotation-Testing Turntable

Proposed turntable for testing heavy equipment in rotation driven by two motors. One operates under actuator commands from position-control subsystem; rotates turntable to commanded angular positions according to specifications for test. Other operates under actuator commands from friction-compensating control subsystem; cancels effect of frictional torque in and on turntable, so equipment tested as though in nearly frictionless environment. Conceived for testing angular-positioning systems for spacecraft solar arrays weighing several tons; equally useful for effectively frictionless rotational testing of heavy terrestrial equipment.

Sullender, Craig C.↗

NASA NTRS1994

Three Magnetic Direct-Current Sensors

Three direct-current-measuring circuits based on magnetic (transformer) coupling, with periodic reset of magnetic flux to reverse saturation. Unidirectional and bidirectional versions demonstrated. Offers greater realibility and lower power consumption.

Sullender, Craig C.↗

NASA NTRS1993

Fast Overcurrent Tripping Circuit

Fast overcurrent tripping circuit designed for incorporation into power metal oxide/semiconductor field-effect transistor (MOSFET) switching circuit. Serves as fast electronic circuit breaker by sensing voltage across MOSFET's during conduction and switching MOSFET's off within 1 microsecond after voltage exceeds reference value corresponding to tripping current. Acts more quickly than Hall-effect current sensor and, in comparison with shunt current-measuring circuits, smaller and consumes less power. Also ignores initial transient overcurrents during first 5 microseconds of switching cycle.

Sullender, Craig C.↗

NASA NTRS1993

Analog-To-Digital Converter For Sum-Of-Squares Measurements

Analog-to-digital converter (ADC) circuit designed as part of larger circuit intended to measure root-mean-square current on 20-kHz powerline. Provides digital output of 11 bits of data plus 1-bit overflow signal at sampling rate of 4 MHz. Output processed by multiplying-and-accumulating circuitry to obtain sum of squares and digitized current samples accumulated during preset number of consecutive sampling periods. Used to digitize current samples from ADC directly as alternative or auxiliary output. Notable features include low power and fast conversion.

Osborn, Stephen H.↗

NASA NTRS1993

Magnetic Direct-Current-Measuring Circuits

Two circuits measure large direct currents in main conductors by use of magnetic fields produced by currents in glassy metal toroidal ferromagnetic cores surrounding main conductors. In both circuits, direct currents to be measured deduced from transient voltages generated in multiturn windings by transitions between magnetic fields produced by measured currents and saturation magnetic fields of cores.

Sullender, Craig C.↗

NASA NTRS1993

Another Nulling Hall-Effect Current-Measuring Circuit

Lightweight, low-power circuit provides noncontact measurement of alternating or direct current of many ampheres in main conductor. Advantages of circuit over other nulling Hall-effect current-measuring circuits is stability and accuracy increased by putting both analog-to-digital and digital-to-analog converters in nulling feedback loop. Converters and rest of circuit designed for operation at sampling rate of 100 kHz, but rate changed to alter time or frequency response of circuit.

Thibodeau, Phillip E.↗

NASA NTRS1993

Nulling Hall-Effect Current-Measuring Circuit

Circuit measures electrical current via combination of Hall-effect-sensing and magnetic-field-nulling techniques. Known current generated by feedback circuit adjusted until it causes cancellation or near cancellation of magnetic field produced in toroidal ferrite core by current measured. Remaining magnetic field measured by Hall-effect sensor. Circuit puts out analog signal and digital signal proportional to current measured. Accuracy of measurement does not depend on linearity of sensing components.

Sullender, Craig C.↗

NASA NTRS1993

Faster Hall-Effect Current-Measuring Circuit

Current-measuring circuit operates on Hall-effect-sensing and magnetic-field-nulling principles similar to those described in article, "Nulling Hall-Effect Current-Measuring Circuit" (LEW-15023), but simpler and responds faster. Designed without feedback loop, and analog pulse-width-modulated output indicates measured current. Circuit measures current at frequency higher than bandwidth of its Hall-effect sensor.

Sullender, Craig C.↗

NASA NTRS1993

Interface For MIL-STD-1553B Data Bus

Electronic control-logic subsystem acts as interface between microcontroller and MIL-STD-1553B data bus. Subsystem made of relatively small number of integrated circuits. Advantages include low power, few integrated-circuit chips, and little need for control signals.

Davies, Bryan L.↗