Engineering topics

Sumanasekera, Gamini

Publications and source records attributed to Sumanasekera, Gamini.

8 records

DOE OSTI2024

Angle-Resolved Polarized Raman Study of Layered Cr 2 Se 3

The polarization-resolved Raman spectra of two-dimensional Cr 2 Se 3 synthesized via chemical vapor deposition (CVD) and chemical vapor transport (CVT) techniques were investigated in detail. The samples were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDS). A distinct polarization dependence was observed in the Raman intensity of all the Cr-Cr, Cr-Se, and Se-Se modes in both samples. The observed angle-dependent Raman intensities of each peak could be related to the crystal structure-specific Raman tensor. XRD results of the bulk Cr 2 Se 3 sample synthesized via CVT confirm its trigonal crystal structure, and the Raman peaks can be fitted using the Raman tensors for the A g and E g modes for both the parallel and crossed polarizations. However, for the Cr 2 Se 3 samples directly grown on Si/SiO 2 substrates by CVD, it was necessary to assume the triclinic crystal structure in order to explain the polarized Raman dependence of all the peaks in both parallel and crossed polarization directions. Furthermore, this is the first experimental result suggesting the existence of triclinic Cr 2 Se 3 crystal structure, which has been theoretically predicted in the Materials Project database.

36 MATERIALS SCIENCE↗

DOE OSTI2024

The effects of thickness, polarization, and strain on vibrational modes of 2D Fe 3 GeTe 2

In this study, we investigated the effects of thickness, light polarization, and strain on the Raman spectra of two-dimensional (2D) Fe 3 GeTe 2 (FGT) crystals synthesized via chemical vapor transport. The crystals are thoroughly characterized using a combination of microscopic, diffraction, and spectroscopic techniques. Particularly, a systematic angle-resolved polarized Raman spectroscopy study reveals a clear polarization dependence of the Raman intensity in both parallel and crossed polarization directions, with the $A$$^{1}_{g}$ mode completely disappearing in the crossed polarization direction. The angle-dependent intensity of both the $A$$^{1}_{g}$ and $E$$^{2}_{2g}$ modes in parallel polarization and the intensity of the $E$$^{2}_{2g}$ mode in the crossed polarization remain constant at all angles. These findings align with predictions from Raman tensor analysis, providing compelling evidence for the unambiguous assignment of the $A$$^{1}_{g}$ and $E$$^{2}_{2g}$ modes to specific peaks observed in the Raman spectrum of FGT, resolving existing confusion in the literature regarding their assignment. Furthermore, we examine the effect of strain on the Raman spectrum of 2D FGT in-situ using a bending device. Our study, conducted on a monolayer to few-layer 2D FGT deposited onto polyethylene terephthalate and subjected to outward (inward), i.e., tensile (compressive) bending, demonstrates appreciable downshifting (upshifting) of the Raman peak position of both $A$$^{1}_{g}$ and $E$$^{2}_{2g}$ modes. Furthermore, these findings are particularly significant given that strain engineering represents an effective approach to modulate the magnetic properties of FGT and other 2D magnetic materials.

2D materials↗

DOE OSTI2024

Angle-resolved polarized Raman study of layered b-As x P x-1 alloys: Identification of As-P vibrational modes

In this study, the polarization-resolved Raman spectra of b-As x P x-1 flakes with varying arsenic concentration (x = 0, 0.4, and 0.8) are systematically investigated. A clear polarization dependence is observed in the Raman intensity of all the P-P, As-P, and As-As modes and confirmed by the first-principles calculations. The observed angle-dependence can be related to the structure of the Raman tensors of each peak. In particular, the Raman intensities corresponding to As-P vibration modes are studied in detail. The out of plane As-P mode ($A$$^{1}_{g}$) is clearly identified, but the butterfly-shaped behavior observed in the polar plot around 350 cm -1 is interpreted as the combination of the two in-plane vibrations, one along the armchair and the other along the zigzag direction. This work allows unambiguous assignment of the $A$$^{1}_{g}$, B 2g , and $A$$^{2}_{g}$ modes of the As-P vibrational modes and the importance of the consideration of the superposition of the in-plane B 2g and $A$$^{2}_{g}$ modes. Such study can be utilized to further characterize the anisotropic structural properties and analyze the local distribution of the As and P in b-As x P x-1 alloys which will play key roles in electronic and optical properties. Furthermore, this methodology can be further extended to alloyed two-dimensional material systems with in-plane anisotropy in general.

2D materials↗

DOE OSTI2023

Predictive Engineering of Interfaces and Cathodes for High-Performance All Solid-State Lithium-Sulfur Batteries

The primary goal of this project is to leverage data-driven methods and machine learning strategies to develop accurate multi-physics models for all-solid-state Li-S battery (ASLSB) materials that can capture electrochemical and transport phenomena over atomic to mesoscopic length/timescales. These models will be rigorously validated by synthesis and advanced characterization experiments. The team will leverage the predictive power of these models, alongside synthesis/characterization experiments and battery fabrication to address longstanding issues at the electrode/electrolyte interfaces in ASLSBs. The project’s proposed technology involves the following: (1) halide-doped solid sulfide electrolytes that can concurrently provide high Li + ion conductivity and suppress dendrite growth; (2) novel mesoporous cathode composed of super-P and carbon nanotubes co-infiltrated with sulfur and sulfide electrolyte, which hold potential to allow high sulfur loading and optimal ion/electron pathways; and (3) functionalization of sulfide electrolyte with ionic liquids to improve physical contact and minimize impedance at the cathode/electrolyte interface. Successful development of proposed predictive models (at multiple scales) will bridge this knowledge gap and will advance fundamental understanding of reaction chemistry, kinetics, charge transfer, and dendrite growth at electrified SSIs. This will enable predictive design of effective strategies to mitigate interfacial problems in ASSLSBs, including poor interfacial contact, interfacial impedance to Li + ion transport, and poor electron/ion conduction within cathodes. Ultimately, the fundamental knowledge gained will lead to development of high-performance ASSLSBs.

25 ENERGY STORAGE↗

DOE OSTI2023

High-pressure response of vibrational properties of b-As x P 1– x : in situ Raman studies

The structural evolution of black arsenic-phosphorous (b-As x P 1–x ) alloys with varying arsenic concentrations was investigated under hydrostatic pressure using in situ Raman spectroscopy. High-pressure experiments were conducted using a diamond anvil cell, which revealed pressure-induced shifts in vibrational modes associated with P–P bonds (A 1 g , A 2 g , ${B}_{2g}$), As–As bonds (A 1 g , A 2 g , ${{B}}_{2g}$), and As–P bonds in b-As x P 1–x alloys. Two distinct pressure regimes were observed. In the first regime (region I), all vibrational modes exhibited a monotonic upshift, indicating phonon hardening due to hydrostatic pressure. In the second regime (region II), As 0.4 P 0.6 and As 0.6 P 0.4 alloys displayed a linear blueshift (or negligible change in some modes) at a reduced rate, suggesting local structural reorganization with less compression on the bonds. Notably, the alloy with the highest As concentration, As 0.8 P 0.2 , exhibited anomalous behavior in the second pressure regime, with a downward shift observed in all As–As and As–P Raman modes (and some P–P modes). Interestingly, the emergence of new peaks corresponding to the E g mode and A 1g mode of the gray-As phase was observed in this pressure range, indicating compressive strain-induced structural changes. The anomalous change in region II confirms the formation of a new local structure, characterized by elongation of the P–P, As–As, and As–P bonds along the zigzag direction within the b-As x P 1–x phase, possibly near the grain boundary. Additionally, a gray-As phase undergoes compressive structural changes. This study underscores the significance of pressure in inducing structural transformations and exploring novel phases in two-dimensional materials, including b-As x P 1–x alloys.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Electrochemical Li intercalation in b-As y P 1–y alloys: In-situ Raman spectroscopy study

Structural evolution of b-As y P 1-y alloys with varying As concentration, y was studied during Li-intercalation using in-situ Raman spectroscopy. A monotonic redshift of all the vibrational modes corresponding to P-P bonds (A 1 g , A 2 g , B 2g ), As-As bonds (A 1 g , A 2 g , B 2g ), and As-P bonds of all the samples was observed during the initial stages of the intercalation process due to the softening of each mode caused by the intercalation driven donor-type charge-transfer from Li to b-As y P 1-y . The emergence of a new peak identified as the E g mode of gray As, above an intercalation threshold, is indicative of the presence of an intercalation-driven structural phase segregation process. Further, the A 1g mode of gray As emerging after this intercalation threshold lies in close proximity of the A 2 g Raman mode of b-As y P 1-y . All the peaks beyond the intercalation threshold show an upshift due to the co-existence of gray As with b-As y P 1-y alloys causing strain and thus hardening of the phonon modes. In the sample with the highest As concentration phase segregation takes place during the synthesis process. Computational modeling reveals the co-existence of gray As in the b-As y P 1-y alloys with high As concentrations. It also confirms the existence of a local structural segregation taking place at a critical Li concentration during the intercalation process. Furthermore, this work shows the significance of intercalation on structural changes in the search for new phases of b-As y P 1-y alloys.

2D Materials↗

DOE OSTI2023

Highly Conductive Iodine and Fluorine Dual-Doped Argyrodite Solid Electrolyte for Lithium Metal Batteries

Sulfide-type argyrodite solid electrolytes (SEs) with halide doping have attracted serious interest. Although other halides such as Cl and Br have been found to enhance Li-ion transport in argyrodites, the direct synthesis of efficiently conductive Li 6 PS 5 I without postprocessing has rarely been investigated. In this work, we report the one-step synthesis of highly conductive Li 6 PS 5 I with an impressive ionic conductivity of 2.5 × 10 –4 S cm –1 at room temperature through a solvent-based method. Moreover, by introducing F – to partially replace I – , hybrid-doped argyrodites Li 6 PS 5 F x I 1–x (x = 0.25, 0.5, 0.75) have been synthesized. Li 6 PS 5 F 0.25 I 0.75 achieves the highest conductivity of 3.5 × 10 –4 S cm –1 due to the energetic preference for anion-disordering among F – /I – and S 2– , which facilitate faster Li transport as supported by density functional theory (DFT) calculations. With higher F content in argyrodites, Li 6 PS 5 F 0.75 I 0.25 displays the best electrochemical stability toward Li metal, as evidenced by long-term stable cycling in Li symmetric cells up to 1100 h. Solid-state Li metal batteries with an active cathode of Li 4 Ti 5 O 12 (LTO) display an initial specific capacity of 140 mAh g –1 and remain at 105 mAh g –1 after 200 cycles, suggesting great battery cycling performance. Furthermore, this research has developed new compositions in the argyrodite SE family which could lead to advancements in the development of solid-state Li metal batteries.

25 ENERGY STORAGE↗

NASA NTRS2010

Method for electrostatic deposition of graphene on a substrate

A method for electrostatic deposition of graphene on a substrate comprises the steps of securing a graphite sample to a first electrode; electrically connecting the first electrode to a positive terminal of a power source; electrically connecting a second electrode to a ground terminal of the power source; placing the substrate over the second electrode; and using the power source to apply a voltage, such that graphene is removed from the graphite sample and deposited on the substrate.

Sumanasekera, Gamini↗