Search NASA⌕ Search

Engineering topics

Sumpter, Bobby G.

Publications and source records attributed to Sumpter, Bobby G..

27 records · Page 2

Coarse-grained explicit-solvent molecular dynamics simulations of semidilute unentangled polyelectrolyte solutions

In this study, we present results from explicit-solvent coarse-grained molecular dynamics (MD) simulations of fully charged, salt-free, and unentangled polyelectrolytes in semidilute solutions. The inclusion of a polar solvent in the model allows for a more physical representation of these solutions at concentrations, where the assumptions of a continuum dielectric medium and screened hydrodynamics break down. The collective dynamic structure factor of polyelectrolytes, S(q, t), showed that at q > q*, where q* = 2π/ξ is the polyelectrolyte peak in the structure factor S(q) and ξ is the correlation length, the relaxation time obtained from fits to stretched exponential was $\tau$ KWW ~ q -3 , which describes unscreened Zimm-like dynamics. This is in contrast to implicit-solvent simulations using a Langevin thermostat where $\tau$ KWW ~ q -2 . At q < q*, a crossover region was observed that eventually transitions to another inflection point $\tau$ KWW ~ q -2 at length scales larger than ξ for both implicit- and explicit-solvent simulations. The simulation results were also compared to scaling predictions for correlation length, ξ ~ c$-½\atop{p}$, specific viscosity, η sp ~ c$½\atop{p}$, and diffusion coefficient, D ~ c$0\atop{p}$, where c p is the polyelectrolyte concentration. The scaling prediction for ξ holds; however, deviations from the predictions for η sp and D were observed for systems at higher c p , which are in qualitative agreements with recent experimental results. This study highlights the importance of explicit-solvent effects in molecular dynamics simulations, particularly in semidilute solutions, for a better understanding of polyelectrolyte solution behavior.

36 MATERIALS SCIENCE↗

Mesoscopic two-point collective dynamics of glass-forming liquids

The collective density–density and hydrostatic pressure–pressure correlations of glass-forming liquids are spatiotemporally mapped out using molecular dynamics simulations. It is shown that the sharp rise of structural relaxation time below the Arrhenius temperature coincides with the emergence of slow, nonhydrodynamic collective dynamics on mesoscopic scales. The observed long-range, nonhydrodynamic mode is independent of wave numbers and closely coupled to the local structural dynamics. Below the Arrhenius temperature, it dominates the slow collective dynamics on length scales immediately beyond the first structural peak in contrast to the well-known behavior at high temperatures. Furthermore, these results highlight a key connection between the qualitative change in mesoscopic two-point collective dynamics and the dynamic crossover phenomenon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Can a deep-learning model make fast predictions of vacancy formation in diverse materials?

The presence of point defects, such as vacancies, plays an important role in materials design. Here, we explore the extrapolative power of a graph neural network (GNN) to predict vacancy formation energies. We show that a model trained only on perfect materials can also be used to predict vacancy formation energies (E vac ) of defect structures without the need for additional training data. Such GNN-based predictions are considerably faster than density functional theory (DFT) calculations and show potential as a quick pre-screening tool for defect systems. To test this strategy, we developed a DFT dataset of 530 E vac consisting of 3D elemental solids, alloys, oxides, semiconductors, and 2D monolayer materials. We analyzed and discussed the applicability of such direct and fast predictions. We applied the model to predict 192 494 E vac for 55 723 materials in the JARVIS-DFT database. Our work demonstrates how a GNN-model performs on unseen data.

2D materials↗

Chemical Upcycling of Polyethylene, Polypropylene, and Mixtures to High-Value Surfactants

Conversion of plastic wastes to fatty acids is an attractive means to supplement the sourcing of these high-value, high-volume chemicals. We report a method for transforming polyethylene (PE) and polypropylene (PP) at ~80% conversion to fatty acids with number-average molar masses of up to ~700 and 670 daltons, respectively. The process is applicable to municipal PE and PP wastes and their mixtures. Temperature-gradient thermolysis is the key to controllably degrading PE and PP into waxes and inhibiting the production of small molecules. The waxes are upcycled to fatty acids by oxidation over manganese stearate and subsequent processing. PP ..beta..-scission produces more olefin wax and yields higher acid-number fatty acids than does PE ..beta..-scission. We further convert the fatty acids to high-value, large-market-volume surfactants. Industrial-scale technoeconomic analysis suggests economic viability without the need for subsidies.

deconstruction↗

Defects in MX2 Phases (DMX) Dataset: STEM Digital Twins

DFT is used to optimize defects in monolayer MX2 phases. We calculate ~600 optimized defect structures, then use multislice simulations in abTEM to generate STEM digital twins, which can be used to train experimental ML. The reference paper for procedures and demonstration of their utility is https://arxiv.org/abs/2305.02917, and the images here correspond with the discussed Messy dataset.

36 MATERIALS SCIENCE↗

Mechanisms Controlling the Energy Barrier for Ion Hopping in Polymer Electrolytes

Here, the present work studies the mechanisms controlling the energy barrier for ion hopping in conducting polymers. Polymer electrolytes usually show Arrhenius-like temperature dependence of the conductivity relaxation time (characteristic time of local ion rearrangements) at temperatures below their glass transition T g . However, our analysis reveals that the Arrhenius fit of this regime leads to unphysically small prefactors, τ 0 $\ll$ 10 –13 s. Imposing a value of 10 –13 s for this parameter renders the fairly unexpected result that the energy barrier for charge transport in these polymers has strong temperature dependence even below T g . Our study also reveals significant temperature variations of the dielectric permittivity and the instantaneous shear modulus in the glassy state of these polymers. Using the Anderson and Stuart model, we demonstrate that these variations provide strong justifications for the temperature variation of energy barrier for ion hopping. Most importantly, the proposed approach reveals that the energy barrier controlling ion hopping in polymer electrolytes is significantly (~30–40%) lower than that estimated using traditional Arrhenius fit. These new insights call for revisions of many earlier results based on apparent Arrhenius fits, and the newly proposed approach can provide more accurate guidance for the design of solid-state electrolytes with enhanced ionic conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Role of SnO2 Processing on Ionic Distribution in Double-Cation-Double Halide Perovskites

Moving toward a future of efficient, accessible, and less carbon-reliant energy devices has been at the forefront of energy research innovations for the past 30 years. Metal-halide perovskite (MHP) thin films have gained significant attention due to their flexibility of device applications and tunable capabilities for improving power conversion efficiency. Serving as a gateway to optimize device performance, consideration must be given to chemical synthesis processing techniques. Therefore, how does common substrate processing techniques influence the behavior of MHP phenomena such as ion migration and strain? Here, we demonstrate how a hybrid approach of chemical bath deposition (CBD) and nanoparticle SnO2 substrate processing significantly improves the performance of (FAPbI3)0.97(MAPbBr3)0.03 by reducing micro-strain in the SnO2 lattice, allowing distribution of K+ from K-Cl treatment of substrates to passivate defects formed at the interface and produce higher current in light and dark environments. X-ray diffraction reveals differences in lattice strain behavior with respect to SnO2 substrate processing methods. Through use of conductive atomic force microscopy (c-AFM), conductivity is measured spatially with MHP morphology, showing higher generation of current in both light and dark conditions for films with hybrid processing. Additionally, time-of-flight secondary ionization mass spectrometry (ToF-SIMS) observed the distribution of K+ at the perovskite/SnO2 interface, indicating K+ passivation of defects to improve the power conversion efficiency (PCE) and device stability. We show how understanding the role of ion distribution at the SnO2 and perovskite interface can help reduce the creating of defects and promote a more efficient MHP device.

conductive atomic force microscopy↗

Double-Atom Catalysts Featuring Inverse Sandwich Structure for CO 2 Reduction Reaction: A Synergetic First-Principles and Machine Learning Investigation

Electrocatalytic CO 2 reduction reactions (CO 2 RR) based on scalable and highly efficient catalysis provide an attractive strategy for reducing CO 2 emissions. Here in this work, we combined first-principles density functional theory (DFT) and machine learning (ML) to comprehensively explore the potential of double-atom catalysts (DACs) featuring an inverse sandwich structure anchored on defective graphene (gra) to catalyze CO 2 RR to generate C 1 products. We started with five homonuclear M 2 ⊥gra (M = Co, Ni, Rh, Ir, and Pt), followed by 127 heteronuclear MM'⊥gra (M = Co, Ni, Rh, Ir, and Pt, M' = Sc–Au). Stable DACs were screened by evaluating their binding energy, formation energy, and dissolution potential of metal atoms, as well as conducting first-principles molecular dynamics simulations with and without solvent water molecules. Based on DFT calculations, Rh 2 ⊥gra DAC was found to outperform the other four homonuclear DACs and the Rh-based single- and double-atom catalysts of noninverse sandwich structures. Out of the 127 heteronuclear DACs, 14 were found to be stable and have good catalytic performance. An ML approach was adopted to correlate key factors with the activity and stability of the DACs, including the sum of radii of metal and ligand atoms (d M–M' , d M–C , and d M'–C ), the sum and difference of electronegativity of two metal atoms (P M + P M' , P M – P M '), the sum and difference of first ionization energy of two metal atoms (I M + I M' , I M – I M '), the sum and difference of electron affinity of two metal atoms (A M + A M' , A M – A M '), and the number of d-electrons of the two metal atoms (Nd). The obtained ML models were further used to predict 154 potential electrocatalysts out of 784 possible DACs featuring the same inverse sandwich configuration. Overall, this work not only identified promising CO 2 RR DACs featuring the reported inverse sandwich structure but also provided insights into key atomic characteristics associated with high CO 2 RR activity.

30 DIRECT ENERGY CONVERSION↗