Search NASA⌕ Search

Engineering topics

Sun, Cheng -Jun

Publications and source records attributed to Sun, Cheng -Jun.

Proton mediated spin state transition of cobalt heme analogs

The spin state transition from low spin to high spin upon substrate addition is one of the key steps in cytochrome P450 catalysis. External perturbations such as pH and hydrogen bonding can also trigger the spin state transition of hemes through deprotonated histidine (e.g. Cytochrome c). In this work, we report the isolated 2-methylimidazole Cobalt(II) [Co(TPP)(2-MeHIm)] and [Co(TTP)(2-MeHIm)], and the corresponding 2-methylimidazolate derivatives where the N–H proton of axial 2-MeHIm is removed. Interestingly, various spectroscopies including EPR and XAFS determine a high-spin state (S = 3/2) for the imidazolate derivatives, in contrast to the low-spin state (S = 1/2) of all known imidazole analogs. DFT assisted stereoelectronic investigations are applied to understand the metal-ligand interactions, which suggest that the dramatically displaced metal center allowing a promotion e g (d π ) → b 1 g (d x 2 –y 2 ) is crucial for the occurrence of the spin state transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aqueous Li-ion battery enabled by halogen conversion–intercalation chemistry in graphite

The use of 'water-in-salt' electrolytes has considerably expanded the electrochemical window of aqueous lithium-ion batteries to 3 to 4 volts, making it possible to couple high-voltage cathodes with low-potential graphite anodes. However, the limited lithium intercalation capacities (less than 200 milliampere-hours per gram) of typical transition-metal-oxide cathodes preclude higher energy densities. Partial or exclusive anionic redox reactions may achieve higher capacity, but at the expense of reversibility. Here we report a halogen conversion-intercalation chemistry in graphite that produces composite electrodes with a capacity of 243 milliampere-hours per gram (for the total weight of the electrode) at an average potential of 4.2 volts versus Li/Li + . Experimental characterization and modelling attribute this high specific capacity to a densely packed stage-I graphite intercalation compound, C 3.5 [Br 0.5 Cl 0.5 ], which can form reversibly in water-in-bisalt electrolyte. By coupling this cathode with a passivated graphite anode, we create a 4-volt-class aqueous Li-ion full cell with an energy density of 460 watt-hours per kilogram of total composite electrode and about 100 per cent Coulombic efficiency. Here, this anion conversion-intercalation mechanism combines the high energy densities of the conversion reactions, the excellent reversibility of the intercalation mechanism and the improved safety of aqueous batteries.

25 ENERGY STORAGE↗

Sub-5 nm edge-rich 1T'-ReSe 2 as bifunctional materials for hydrogen evolution and sodium-ion storage

The rhenium-based transition metal dichalcogenides (TMDs), as new members in the TMDs family, have raised great interests recently. Due to the anisotropic structure and unique photoelectric properties, they have potential applications for electrochemical energy conversion and storage. In this work, we performed density functional theory (DFT) calculations on pristine 1T'-ReSe 2 toward hydrogen evolution reaction (HER). The results indicated that the Gibbs free energy of the 1T'-ReSe 2 edge site for HER could be as small as 0.01 eV, superior to other reported TMDs. Experimentally, we developed a strategy to fabricate sub-5 nm sized 1T'-ReSe 2 nanoflakes on carbon nanotubes. Such a small size for the nanoflakes brought abundant edge exposure, which boosted the catalytic activity in the HER. Specifically, the 1T'-ReSe 2 nanoflakes needed only 23 and 60 mV overpotentials to achieve –1 and –10 mA cm –2 current densities, along with a low Tafel slope of 37 mV dec –1 and a high exchange current density of 0.3 mA cm –2 . The edge-rich and layered 1T'-ReSe 2 was also explored as an anode for sodium ion battery. The in operando X-ray absorption near edge structure (XANES) technique was applied to investigate the TMD behavior in real-time during the sodiation/desodiation process. Furthermore, the in situ results revealed that the nanosized 1T'-ReSe 2 is electrchemically reversible during discharge/charge cycles. The electrochemical test results demonstrated that 1T'-ReSe 2 could be a promising anode material for alkaline batteries.

25 ENERGY STORAGE↗

Deciphering the Cathode-Electrolyte Interfacial Chemistry in Sodium Layered Cathode Materials

The ever–increasing demand for stationary energy storage has driven the prosperous investigation of low–cost sodium ion batteries. The inferior long–term cycling stability of cathode materials is a significant roadblock toward the wide commercialization of sodium ion batteries. This study enlightens a path toward empowering stable sodium ion batteries through incisive diagnostics of the multiscale surface chemical processes in layered oxide materials (e.g., O3–NaNi 1/3 Fe 1/3 Mn 1/3 O 2 ). The major challenges are unraveled in a promising sodium layered cathode material using a range of complementary advanced spectroscopic and imaging diagnostic techniques. It is discovered that the cathode–electrolyte interfacial reaction triggers transition metal reduction, heterogeneous surface reconstruction, metal dissolution, and formation of intragranular nanocracks. These surface chemistry driven processes are partly responsible for significant performance decay. This diagnostic study also rationalizes the elemental substitution and surface passivation methods that are widely applied in the field. The prepassivated and Ti–substituted cathode materials allow for significantly improved cycling stability by inhibiting the metal dissolution. Furthermore, incisively diagnosing the interfacial chemistry not only creates scientific insights into understanding sodium cathode chemistry, but also represents an advance toward establishing universal interfacial design principles for all alkali metal ion cathode materials.

25 ENERGY STORAGE↗

Control of magnetic anisotropy by orbital hybridization with charge transfer in (La 0.67 Sr 0.33 MnO 3 ) n /(SrTiO 3 ) n superlattice

Here, the chemical asymmetry at the hetero-structure interface offers an effective opportunity to design desirable electronic structures by controlling charge transfer and orbital hybridization across the interface. However, controlling the hetero-interface remains a daunting task. Here, we report the modulation of interfacial coupling of (La 0.67 Sr 0.33 MnO 3 ) n /(SrTiO 3 ) n superlattices by manipulating the periodic thickness with n unit cells of SrTiO 3 and n unit cells of La 0.67 Sr 0.33 MnO 3 with a fixed thickness of ~120 unit cells. The easy axis of magnetic anisotropy rotates ~45° towards the out-of-plane direction from n = 10 to n = 2 at reduced temperature T Re = T/T S = 0.87, where T S is the temperature at the onset of magnetization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Single-Phase Pyrochlore Y 2 Ir 2 O 7 Electrocatalyst on the Activity of Oxygen Evolution Reaction

Single phase pyrochlore-type Y 2 Ir 2 O 7 electrocatalyst was made through the sol-gel synthesis. This catalyst has high activity and stability towards oxygen evolution reaction (OER) in acid. Here, chronopotentiometry analysis showed no obvious change in overpotential for more than 24 h measurement at 10 mA/cm 2 geo . X-ray absorption spectroscopy (XAS) demonstrates that the single electron filling in e" orbital of Ir 5d states, induced by the spin-orbital coupling, could contribute to the improved OER activity.

36 MATERIALS SCIENCE↗

Empowering multicomponent cathode materials for sodium ion batteries by exploring three-dimensional compositional heterogeneities

Affordable sodium ion batteries hold great promise for revolutionizing stationary energy storage technologies. Sodium layered cathode materials are usually multicomponent transition metal (TM) oxides and each TM plays a unique role in the operating cathode chemistry, e.g., redox activity, structural stabilization. Engineering the three-dimensional (3D) distribution of TM cations in individual cathode particles can take advantage of a depth-dependent charging mechanism and enable a path towards tuning local TM–O chemical environments and building resilience against cathode–electrolyte interfacial reactions that are responsible for capacity fading, voltage decay and safety hazards. In this study, we create 3D compositional heterogeneity in a ternary and biphasic (O3–P3) sodium layered cathode material (Na 0.9 Cu 0.2 Fe 0.28 Mn 0.52 O 2 ). The cells containing this material deliver stable voltage profiles, and discharge capacities of 125 mA h g –1 at C/10 with almost no capacity fading after 100 cycles and 75 mA h g –1 at 1C with negligible capacity fading after 200 cycles. The direct performance comparison shows that this material outperforms other materials with similar global compositions but different mesoscale chemical distributions. Synchrotron X-ray spectroscopy/imaging and density functional theory studies reveal depth-dependent chemical environments due to changes to factors such as charge compensation and strength of orbital hybridization. Finally, 3D spectroscopic tomography illuminates the path towards optimizing multicomponent sodium layered cathode materials, to prevent the migration of TMs upon prolonged cycling. Furthermore, the study reports an inaugural effort of multifaceted and counterintuitive investigation of sodium layered cathode materials and strongly implies that there is plenty of room at the bottom by tuning nano/meso scale chemical distributions for stable cathode chemistry.

25 ENERGY STORAGE↗

Insights into the structural effects of layered cathode materials for high voltage sodium-ion batteries

Cathode materials are critical to the energy density, power density and safety of sodium-ion batteries (SIBs). Herein, we performed a comprehensive study to elucidate and exemplify the interplay mechanism between phase structures, interfacial microstrain and electrochemical properties of layered-structured Na x Ni 1/3 Co 1/3 Mn 1/3 O 2 cathode materials for high voltage SIBs. The electrochemical test results showed that Na x Ni 1/3 Co 1/3 Mn 1/3 O 2 with an intergrowth P2/O3/O1 structure demonstrates better electrochemical performance and better thermal stability than Na x Ni 1/3 Co 1/3 Mn 1/3 O 2 with P2/O3 binary-phase integration and Na x Ni 1/3 Co 1/3 Mn 1/3 O 2 where only the P phase is dominant. This result is caused by the distinct interfacial microstrain development during the synthesis and cycling of the P2/O3/O1 phase. In operando high energy X-ray diffraction further revealed that the intergrowth P2/O1/O3 cathode can inhibit the irreversible P2–O2 phase transformation and simultaneously improve the structure stability of the O3 and O1 phases during cycling. Here, we believe that interfacial microstrain can serve as an indispensable bridge to guide future design and synthesis of high performance SIB cathode materials and other high energy battery materials.

25 ENERGY STORAGE↗

Revealing mechanism responsible for structural reversibility of single-crystal VO 2 nanorods upon lithiation/delithiation

A pure phase of VO 2 (B) nanorods have been synthesized through an energy-efficient microwave hydrothermal reaction and used as cathode materials of lithium ion batteries, which exhibit promising specific capacity (e.g., 130 mA h g -1 even after 100 charge/discharge cycles) and rate capacity (e.g., ~130 mA h g -1 at a high current of 400 mA g -1 ). The excellent cyclability originates from the structural reversibility of VO 2 (B) upon lithiation/delithiation that is confirmed by the in situ high-energy synchrotron X-ray diffraction (HEXRD) and in situ x-ray adsorption near-edge spectroscopy (XANES) of the VO 2 nanorods in operating battery cells. As a result, the real-time results reveal that discharge forces lithium ions to insert firstly into the tunnels with the largest size along b direction followed by the second largest tunnels along c direction, which is completely reversible in the charge process.

36 MATERIALS SCIENCE↗

Insights into the distinct lithiation/sodiation of porous cobalt oxide by in operando synchrotron x-ray techniques and ab initio molecular dynamics simulations

Sodium-ion batteries (SIBs) have been considered as one of the promising power source candidates for the stationary storage industries owing to the much lower cost of sodium than lithium. It is well-known that the electrode materials largely determine the energy density of the battery systems. However, recent discoveries on the electrode materials showed that most of them present distinct lithium and sodium storage performance, which is not yet well understood. In this work, we performed a comparative understanding on the structural changes of porous cobalt oxide during its electrochemical lithiation and sodiation process by in operando synchrotron small angel X-ray scattering, X-ray diffraction, and X-ray absorption spectroscopy. It was found that compared to the lithiation process, the porous cobalt oxide undergoes less pore structure changes, oxidation state, and local structure changes as well as crystal structure evolution during its sodiation process, which is attributed to the intrinsic low sodiation activity of cobalt oxide as evidenced by ab initio molecular dynamics simulations. Moreover, it was indicated that the sodiation activity of metal sulfides is higher than that of metal oxides, indicating a better candidate for SIBs. Furthermore, such understanding is crucial for future design and improvement of high-performance electrode materials for SIBs.

25 ENERGY STORAGE↗

Development of a single-cell X-ray fluorescence flow cytometer

An X-ray fluorescence flow cytometer that can determine the total metal content of single cells has been developed. Capillary action or pressure was used to load cells into hydrophilic or hydrophobic capillaries, respectively. Once loaded, the cells were transported at a fixed vertical velocity past a focused X-ray beam. X-ray fluorescence was then used to determine the mass of metal in each cell. By making single-cell measurements, the population heterogeneity for metals in the µ M to m M concentration range on fL sample volumes can be directly measured, a measurement that is difficult using most analytical methods. This approach has been used to determine the metal composition of 936 individual bovine red blood cells (bRBC), 31 individual 3T3 mouse fibroblasts (NIH3T3) and 18 Saccharomyces cerevisiae (yeast) cells with an average measurement frequency of ~4 cells min –1 . These data show evidence for surprisingly broad metal distributions. Lastly, details of the device design, data analysis and opportunities for further sensitivity improvement are described.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A magnesium–sodium hybrid battery with high operating voltage

Here, we report a high performance magnesium-sodium hybrid battery utilizing a magnesium-sodium dual-salt electrolyte, a magnesium anode, and a Berlin green cathode. The cell delivers an average discharge voltage of 2.2 V and a reversible capacity of 143 mA h g –1 . We also demonstrate the cell with an energy density of 135 W h kg –1 and a high power density of up to 1.67 kW kg –1 .

25 ENERGY STORAGE↗

Structure-induced microalloying effect in multicomponent alloys

In this study, the microalloying effect on glass-forming ability (GFA) has been investigated from the structural aspect, by performing synchrotron radiation x-ray diffraction and absorption measurements coupled with simulations in the NiNbZr ternary system. We propose a new parameter which counts the fraction of the fivefold symmetries in all clusters and find it is strongly associated with the GFA. In particular, this structural parameter has the highest value in a composition where the best GFA is achieved. The present work provides an in-depth understanding of microalloying-induced high GFAs in multicomponent alloys.

36 MATERIALS SCIENCE↗

Effects of strain relaxation in Pr 0.67 Sr 0.33 MnO 3 films probed by polarization dependent X-ray absorption near edge structure

In this study, the Mn K edge X-ray absorption near edge structure (XANES) of Pr 0.67 Sr 0.33 MnO 3 films with different thicknesses on (001) LaAlO 3 substrate were measured, and the effects of strain relaxation on film properties were investigated. The films experienced in-plane compressive strain and out-of-plane tensile strain. Strain relaxation evolved with the film thickness. In the polarization dependent XANES measurements, the in-plane (parallel) and out-of-plane (perpendicular) XANES spectrocopies were anisotropic with different absorption energy E r . The resonance energy Er along two directions shifted towards each other with increasing film thickness. Based on the X-ray diffraction results, it was suggested that the strain relaxation weakened the difference of the local environment and probability of electronic charge transfer (between Mn 3d and O 2p orbitals) along the in-plane and out-of-plane directions, which was responsible for the change of E r . XANES is a useful tool to probe the electronic structures, of which the effects on magnetic properties with the strain relaxation was also been studied.

36 MATERIALS SCIENCE↗