Search NASA⌕ Search

Engineering topics

Sun, Dali

Publications and source records attributed to Sun, Dali.

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Antiferromagnetic Ordering in A One‐Dimensional Organic Copper Chloride Hybrid Insulator

Abstract Low dimensional (LD) organic metal halide hybrids (OMHHs) have recently emerged as new generation functional materials with exceptional structural and property tunability. Despite the remarkable advances in the development of LD OMHHs, optical properties have been the major functionality extensively investigated for most of LD OMHHs developed to date, while other properties, such as magnetic and electronic properties, remain significantly under‐explored. Here, we report for the first time the characterization of the magnetic and electronic properties of a 1D OMHH, organic‐copper (II) chloride hybrid (C 8 H 22 N 2 )Cu 2 Cl 6 . Owing to the antiferromagnetic coupling between Cu atoms through chloride bridges in 1D [Cu 2 Cl 6 2− ] ∞ chains, (C 8 H 22 N 2 )Cu 2 Cl 6 is found to exhibit antiferromagnetic ordering with a Néel temperature of 24 K. The two‐terminal (2T) electrical measurement on a (C 8 H 22 N 2 )Cu 2 Cl 6 single crystal reveals its insulating nature. This work shows the potential of LD OMHHs as a highly tunable quantum material platform for spintronics.

Islam, Md Sazedul↗
DOE OSTI2024

Colossal anisotropic absorption of spin currents induced by chirality

The chiral induced spin selectivity (CISS) effect, in which the structural chirality of a material determines the preference for the transmission of electrons with one spin orientation over that of the other, is emerging as a design principle for creating next-generation spintronic devices. CISS implies that the spin preference of chiral structures persists upon injection of pure spin currents and can act as a spin analyzer without the need for a ferromagnet. Here, we report an anomalous spin current absorption in chiral metal oxides that manifests a colossal anisotropic nonlocal Gilbert damping with a maximum-to-minimum ratio of up to 1000%. A twofold symmetry of the damping is shown to result from differential spin transmission and backscattering that arise from chirality-induced spin splitting along the chiral axis. These studies reveal the rich interplay of chirality and spin dynamics and identify how chiral materials can be implemented to direct the transport of spin current.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Combinatorial split-ring and spiral metaresonator for efficient magnon-photon coupling

Developing hybrid materials and structures for electromagnetic wave engineering has been a promising route towards novel functionalities and tunabilities in many modern applications. Despite its established success in engineering optical light and terahertz waves, the implementation of metaresonators operating in the microwave band is still emerging, especially the implementation of metaresonators that allow on-chip integration and size miniaturization, which is crucial for developing hybrid quantum systems in the microwave band. In this work, we present a microwave metaresonator consisting of split-ring and spiral resonators, and implement it for the investigation of photon-magnon coupling for hybrid magnonic applications. We observe broadened bandwidth of the split-ring modes augmented by the additional spiral resonator, and, by coupling the modes to a magnetic sample, the resultant photon-magnon coupling can be significantly enhanced by more than tenfold. Furthermore, our work suggests that combinatorial, hybrid microwave resonators may be a promising approach towards future development and implementation of photon-magnon coupling in hybrid magnonic systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Inverse chirality-induced spin selectivity effect in chiral assemblies of π -conjugated polymers

Coupling of spin and charge currents to structural chirality in non-magnetic materials, known as chirality-induced spin selectivity, is promising for application in spintronic devices at room temperature. Although the chirality-induced spin selectivity effect has been identified in various chiral materials, its Onsager reciprocal process, the inverse chirality-induced spin selectivity effect, remains unexplored. Here we report the observation of the inverse chirality-induced spin selectivity effect in chiral assemblies of π-conjugated polymers. Using spin-pumping techniques, the inverse chirality-induced spin selectivity effect enables quantification of the magnitude of the longitudinal spin-to-charge conversion driven by chirality-induced spin selectivity in different chiral polymers. By widely tuning conductivities and supramolecular chiral structures via a printing method, we found a very long spin relaxation time of up to several nanoseconds parallel to the chiral axis. Furthermore, our demonstration of the inverse chirality-induced spin selectivity effect suggests possibilities for elucidating the puzzling interplay between spin and chirality, and opens a route for spintronic applications using printable chiral assemblies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Spreading resistance effects in tunneling spectroscopy of α–RuCl 3 and Ir 0.5 Ru 0.5 Cl 3

The Mott insulating state is the progenitor of many interesting quantum phases of matter including the famous high-temperature superconductors and quantum spin liquids. A recent candidate for novel spin liquid phenomena is α–RuCl 3 , a layered honeycomb Mott insulator whose electronic structure has been a source of mystery. In particular, scanning tunneling spectroscopy has indicated a Mott gap in α–RuCl 3 that is much lower than the 2-eV value observed in photoemission measurements. Here, we show that the origin of this discrepancy is a spreading resistance artifact associated with tunneling into highly resistive materials by comparing with prior experiments and numerical modeling. Furthermore, a similar phenomenon is also observed in a substitutional alloy, Ir 0.5 Ru 0.5 Cl 3 , that has a higher resistivity than the parent compound. While the tunneling measurements cannot be used to accurately measure the sample density of states for these materials, we can take advantage of the spreading resistance sensitivity to quantify the anisotropic resistivity of these layered materials and connect to previous macroscopic transport observations.

2-dimensional systems↗
DOE OSTI2023

Giant interfacial spin Hall angle from Rashba-Edelstein effect revealed by the spin Hall Hanle process

The Rashba-Edelstein effect (REE), which generates interfacial spin polarization and subsequent spin current, is a compelling spin-charge conversion mechanism for spintronic applications, since it’s not limited by the elemental spin-orbit couplings. In this work we demonstrate REE at Pt/ferroelectric interfaces by showing a positive correlation between polarization and effective spin Hall angle in the recently elucidated spin Hall Hanle effects (SHHE), in which a Larmor precession of spin polarization in a diffusion process from the interface manifest as magnetoresistance and Hall effect. We show that REE leads to a large enhancement of the effective spin Hall angle of ferroelectric interface Pt/h-LuFeO 3 compared with that of Pt/Al 2 O 3 , without obvious differences in the spin relaxation time. Modeling using SHHEs involving REE as an additional source of interfacial polarization suggests that REE can lead to an interfacial spin Hall angle (0.4 ± 0.1) in Pt/h-LuFeO 3 that is one order of magnitude larger than the bulk value of Pt. Our results demonstrate that a ferroelectric interface can produce large spin-charge conversion and that SHHEs are a sensitive tool for characterizing interfacial spin-transport properties.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Sustainable materials acceleration platform reveals stable and efficient wide-bandgap metal halide perovskite alloys

The vast chemical space of emerging semiconductors, like metal halide perovskites, and their varied requirements for semiconductor applications have rendered trial-and-error environmentally unsustainable. Here, in this work, we demonstrate RoboMapper, a materials acceleration platform (MAP), that achieves 10-fold research acceleration by formulating and palletizing semiconductors on a chip, thereby allowing high-throughput (HT) measurements to generate quantitative structure-property relationships (QSPRs) considerably more efficiently and sustainably. We leverage the RoboMapper to construct QSPR maps for the mixed ion FA 1-y Cs y Pb(I 1-x Br x ) 3 halide perovskite in terms of structure, bandgap, and photostability with respect to its composition. We identify wide-bandgap alloys suitable for perovskite-Si hybrid tandem solar cells exhibiting a pure cubic perovskite phase with favorable defect chemistry while achieving superior stability at the target bandgap of ~1.7 eV. RoboMapper’s palletization strategy reduces environmental impacts of data generation in materials research by more than an order of magnitude, paving the way for sustainable data-driven materials research.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Thickness-Dependent Thermal Conductivity and Phonon Mean Free Path Distribution in Single-Crystalline Barium Titanate

Nanosized perovskite ferroelectrics are widely employed in several electromechanical, photonics, and thermoelectric applications. Scaling of ferroelectric materials entails a severe reduction in the lattice (phonon) thermal conductivity, particularly at sub-100 nm length scales. Such thermal conductivity reduction can be accurately predicted using the information of phonon mean free path (MFP) distribution. The current understanding of phonon MFP distribution in perovskite ferroelectrics is still inconclusive despite the critical thermal management implications. Here, high-quality single-crystalline barium titanate (BTO) thin films, a representative perovskite ferroelectric material, are grown at several thicknesses. Using experimental thermal conductivity measurements and first-principles based modeling (including four-phonon scattering), the phonon MFP distribution is determined in BTO. The simulation results agree with the measured thickness-dependent thermal conductivity. The results show that the phonons with sub-100 nm MFP dominate the thermal transport in BTO, and phonons with MFP exceeding 10 nm contribute ≈35% to the total thermal conductivity, in significant contrast to previously published experimental results. The experimentally validated phonon MFP distribution is consistent with the theoretical predictions of other complex crystals with strong anharmonicity. This work paves the way for thermal management in nanostructured and ferroelectric-domain-engineered systems for oxide perovskite-based functional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Comprehensive demonstration of spin Hall Hanle effects in epitaxial Pt thin films

In this work, we demonstrate a nonlinear Hall effect due to the boundary spin accumulation in Pt films grown on Al 2 O 3 substrates. This Hall effect and the previously demonstrated Hanle magnetoresistance provide a complete picture of the spin-precession control of the spin and charge transport at the boundary of a spin-orbit coupled material, which we refer to as spin Hall Hanle effects (SHHE). We also show that the SHHE can be employed to measure the spin diffusion length, the spin Hall angle, and the spin relaxation time of heavy metal without the need of magnetic interface or the input from other measurements. The comprehensive demonstration of SHHE in such a simple system suggests they may be ubiquitous and needs to be considered for unraveling the spin and charge transport in more complex thin-film structures of spin-orbit coupled materials.

36 MATERIALS SCIENCE↗