Search NASA⌕ Search

Engineering topics

Sun, S

Publications and source records attributed to Sun, S.

Geochemical, metagenomic and metaproteomic insights into trace metal utilization by methane-oxidizing microbial consortia in sulfidic marine sediments

Microbes have obligate requirements for trace metals in metalloenzymes that catalyze important biogeochemical reactions. In anoxic methane- and sulfide-rich environments, microbes may have unique adaptations for metal acquisition and utilization due to decreased bioavailability as a result of metal sulfide precipitation. However, micronutrient cycling is largely unexplored in cold ( 10 C) and sulfidic (>1 mM H2S) deep-sea methane seep ecosystems. We investigated trace metal geochemistry and microbial metal utilization in methane seeps offshore Oregon and California, USA, and report dissolved concentrations of nickel (0.5-270 nM), cobalt (0.5-6 nM), molybdenum (10-5,600 nM) and tungsten (0.3-8 nM) in Hydrate Ridge sediment porewaters. Despite low levels of cobalt and tungsten, metagenomic and metaproteomic data suggest that microbial consortia catalyzing anaerobic oxidation of methane utilize both scarce micronutrients in addition to nickel and molybdenum. Genetic machinery for cobalt-containing vitamin B12 biosynthesis was present in both anaerobic methanotrophic archaea (ANME) and sulfate-reducing bacteria (SRB). Proteins affiliated with the tungsten-containing form of formylmethanofuran dehydrogenase were expressed in ANME from two seep ecosystems, the first evidence for expression of a tungstoenzyme in psychrotolerant microorganisms. Finally, our data suggest that chemical speciation of metals in highly sulfidic porewaters may exert a stronger influence on microbial bioavailability than total concentration

Glass, DR. Jennifer↗

Geochemical, metagenomic and metaproteomic insights into trace metal utilization by methane-oxidizing microbial consortia in sulphidic marine sediments

Microbes have obligate requirements for trace metals in metalloenzymes that catalyse important biogeochemical reactions. In anoxic methane- and sulphiderich environments, microbes may have unique adaptations for metal acquisition and utilization because of decreased bioavailability as a result of metal sulphide precipitation. However, micronutrient cycling is largely unexplored in cold ( 10 C) and sulphidic (> 1 mM H2S) deep-sea methane seep ecosystems. We investigated trace metal geochemistry and microbial metal utilization in methane seeps offshore Oregon and California, USA, and report dissolved concentrations of nickel (0.5 270 nM), cobalt (0.5 6 nM), molybdenum (10 5600 nM) and tungsten (0.3 8 nM) in Hydrate Ridge sediment porewaters. Despite low levels of cobalt and tungsten, metagenomic and metaproteomic data suggest that microbial consortia catalysing anaerobic oxidation of methane (AOM) utilize both scarce micronutrients in addition to nickel and molybdenum. Genetic machinery for cobalt-containing vitamin B12 biosynthesis was present in both anaerobic methanotrophic archaea (ANME) and sulphate-reducing bacteria. Proteins affiliated with the tungsten-containing form of formylmethanofuran dehydrogenase were expressed in ANME from two seep ecosystems, the first evidence for expression of a tungstoenzyme in psychrophilic microorganisms. Overall, our data suggest that AOM consortia use specialized biochemical strategies to overcome the challenges of metal availability in sulphidic environments.

Glass, DR. Jennifer↗

Structure-Induced Enhancement in Electrooxidation of Trimetallic FePtAu Nanoparticles

Using FePtAu nanoparticles (NPs) as an example, this Communication demonstrates a new structure-control strategy to tune and optimize NP catalysis. The presence of Au in FePtAu facilitates FePt structure transformation from chemically disordered face-centered cubic (fcc) structure to chemically ordered face-centered tetragonal (fct) structure, and further promotes formic acid oxidation reaction (FAOR). The fct-FePtAu NPs have mass activity as high as 2809.9 mA/mg Pt and retain 92.5% of this activity after a 13 h stability test. They become the most efficient NP catalyst ever reported for FAOR. This structure-control strategy can be extended to other multimetallic NP systems, providing a general approach to advanced NP catalysts with desired activity and durability control for practical applications.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Surfactant removal for colloidal nanoparticles from solution systhesis: the effect on catalytic performance

Colloidal nanoparticles prepared by solution synthesis with robust control over particle size, shape, composition, and structure have shown great potential for catalytic applications. However, such colloidal nanoparticles are usually capped with organic ligands (as surfactants) and cannot be directly used as catalyst. We have studied the effect of surfactant removal on the electrocatalytic performance of Pt nanoparticles made by organic solution synthesis. Various methods were applied to remove the oleylamine surfactant, which included thermal annealing, acetic acid washing, and UV-Ozone irradiation, and the treated nanoparticles were applied as electrocatalysts for the oxygen reduction reaction. It was found that the electrocatalytic performance, including electrochemically active surface area and catalytic activity, was strongly dependent on the pretreatment. Among the methods studied here, low-temperature thermal annealing ({approx}185 C) in air was found to be the most effective for surface cleaning without inducing particle size and morphology changes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stacking Faults Created by the Combined Deflection of Threading Dislocations of Burgers Vector c and cplusa during the Physical Vapor Transport Growth of 4H-SiC

Observations have been made, using synchrotron white beam x-ray topography, of stacking faults in 4H-SiC with fault vectors of kind 1/6 <20{bar 2}3>. A mechanism has been postulated for their formation which involves overgrowth by a macrostep of the surface outcrop of a c-axis threading screw dislocation, with two c/2-height surface spiral steps, which has several threading dislocations of Burgers vector c+a, with c-height spiral steps, which protrude onto the terrace in between the c/2-risers. Such overgrowth processes deflect the threading dislocations onto the basal plane, enabling them to exit the crystal and thereby providing a mechanism to lower their densities.

36 MATERIALS SCIENCE↗

Synthesis of Pt{sub 3}Sn alloy nanoparticles and their catalysis for electro-oxidation of CO and methanol.

Monodisperse Pt{sub 3}Sn alloy nanoparticles (NPs) were synthesized by a controlled coreduction of Pt(II) acetylacetonate and Sn(II) acetylacetonate at 180-280 C in 1-octadecene. In the synthesis, oleylamine was used as a reducing agent, and oleylamine/oleic acid served as surfactants. The sizes of the Pt{sub 3}Sn NPs were tuned from 4 to 7 nm by controlling the metal salt injection temperatures from 180 to 240 C. These monodisperse Pt3Sn NPs were highly active for CO and methanol oxidation in 0.1 M HClO{sub 4} solutions, and their activity and stability could be further improved by a postsynthesis thermal treatment at 400 C in Ar + 5% H{sub 2} for 1 h. They are promising as a practical catalyst for CO and methanol oxidation reactions in polymer electrolyte membrane fuel cell conditions.

10 SYNTHETIC FUELS↗

Surfactant-induced postsynthetic modulation of Pd nanoparticle crystallinity.

Modulation of Pd nanoparticle (NP) crystallinity is achieved by switching the surfactants of different binding strengths. Pd NPs synthesized in the presence of weak binding surfactants such as oleylamine possess polyhedral shapes and a polycrystalline nature. When oleylamine is substituted by trioctylphosphine, a much stronger binding surfactant, the particles become spherical and their crystallinity decreases significantly. Moreover, the Pd NPs reconvert their polycrystalline structure when the surfactant is switched back to oleylamine. Through control experiments and molecular dynamics simulation, we propose that this unusual nanocrystallinity transition induced by surfactant exchange was resulted from a counterbalance between the surfactant binding energy and the nanocrystal adhesive energy. The findings represent a novel postsynthetic approach to tailoring the structure and corresponding functional performance of nanomaterials.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NUMERICAL MODELING OF CONTAMINANT TRANSPORT IN FRACTURED POROUS MEDIA USING MIXED FINITE ELEMENT AND FINITE VOLUME METHODS

A mathematical model for contaminant species passing through fractured porous media is presented. In the numerical model, we combine two locally conservative methods, i.e. mixed finite element (MFE) and the finite volume methods. Adaptive triangle mesh is used for effective treatment of the fractures. A hybrid MFE method is employed to provide an accurate approximation of velocities field for both the fractures and matrix which are crucial to the convection part of the transport equation. The finite volume method and the standard MFE method are used to approximate the convection and dispersion terms respectively. The model is used to investigate the interaction of adsorption with transport and to extract information on effective adsorption distribution coefficients. Numerical examples in different fractured media illustrate the robustness and efficiency of the proposed numerical model.

54 ENVIRONMENTAL SCIENCES↗

Crystallization of the Membrane-Associated Annexin B1: Roles of Additive Screen, Dynamic Light Scattering, and Bioactivity Assay

Annexin B1 (AnxB1) is a calcium-dependent phospholipid binding protein from Taenia solium cysticercus and has been reported to possess anticoagulant activity, to inhibit phospholipase A{sub 2}, and to regulate membrane transport. Native AnxB1 and its selenomethionyl derivative have been overproduced in Escherichia coli and purified. The results of dynamic light scattering analysis showed that Hepes buffer combined with low concentration salts (NaCl or CaCl{sub 2}) was beneficial for preventing aggregation and for AnxB1 stabilization in the storage. After the additive screen, crystals have been yielded in the presence of guanidine hydrochloride (Gn-HCl). We determined that a low concentration of Gn-HCl significantly delayed clotting time and increased anticoagulant activity. Analysis of the crystal showed that in the presence of Gn-HCl, AnxB1 crystallizes in orthorhombic space group, which is modified from the cubic space group for crystals grown in the absence of Gn-HCl. A high quality data set (at 1.9 {angstrom}) has been collected successfully for crystals of L-selenomethionine labeled protein in the presence of Gn-HCl, to solve the structure with the single anomalous dispersion method (SAD). The unit cell parameters are a = 102.35 {angstrom}, b = 103.59 {angstrom}, c = 114.60 {angstrom}, {alpha} = {beta} = {gamma} = 90.00{sup o}.

59 BASIC BIOLOGICAL SCIENCES↗

Rational synthesis of heterostructured nanoparticles with morphology control.

Rational synthesis of Pt-Au{sub n} nanoparticles (NPs) has been achieved by overgrowing Au on Pt with n, the number of Pt-Au heterojunctions in each particle, controlled from 1 to 4, and the corresponding NPs in pear-, peanut-, or clover-like morphology. Monte Carlo simulation reveals that the morphology control can be correlated to a thermodynamic equilibrium of the Au coherence energy, the overall particle surface energy, and the heterogeneous Pt-Au interfacial energy in the composite system, which is manipulated by the seeding particle size and solvent polarity. The developed synthetic strategy together with the provided fundamental understanding of heterogeneous nucleation and heterostructure growth could have great potential toward the rational synthesis of composite nanomaterials with morphology control for advanced catalytic and other functional applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Proposal of a novel multifunctional energy system for cogeneration of coke, hydrogen, and power - article no. 052001

This paper proposes a novel multifunctional energy system (MES), which cogenerates coke, hydrogen, and power, through the use of coal and coke oven gas (COG). In this system, a new type of coke oven, firing coal instead of COG as heating resource for coking, is adopted. The COG rich in H{sub 2} is sent to a pressure swing adsorption (PSA) unit to separate about 80% of hydrogen first, and then the PSA purge gas is fed to a combined cycle as fuel. The new system combines the chemical processes and power generation system, along with the integration of chemical conversion and thermal energy utilization. In this manner, both the chemical energy of fuel and thermal energy can be used more effectively. With the same inputs of fuel and the same output of coking heat, the new system can produce about 65% more hydrogen than that of individual systems. As a result, the thermal efficiency of the new system is about 70%, and the exergy efficiency is about 66%. Compared with individual systems, the primary energy saving ratio can reach as high as 12.5%. Based on the graphical exergy analyses, we disclose that the integration of synthetic utilization of COG and coal plays a significant role in decreasing the exergy destruction of the MES system. The promising results obtained may lead to a clean coal technology that will utilize COG and coal more efficiently and economically.

08 HYDROGEN↗

Synthesis of AuAg alloy nanoparticles from core/shell-structured Ag/Au.

Monodisperse AuAg alloy nanoparticles (NPs) are made from core/shell Ag/Au NPs through Au and Ag diffusion in oleylamine. The composition of the alloy NPs is controlled by the Au shell thickness and the plasmonic absorptions can be tuned from 520 to 400 nm. These alloy NPs have great potential as optical probes for biosensing and bioimaging, or as catalysts for CO oxidation.

36 MATERIALS SCIENCE↗