Search NASA⌕ Search

Engineering topics

Sun, Wenhao

Publications and source records attributed to Sun, Wenhao.

9 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Thermodynamic origin of nonvolatility in resistive memory

Electronic switches based on the migration of high-density point defects, or memristors, are poised to revolutionize post-digital electronics. Despite significant research, key mechanisms for filament formation and oxygen transport remain unresolved, hindering our ability to predict and design device properties. For example, experiments have achieved 10 orders of magnitude longer retention times than predicted by current models. Here, using electrical measurements, scanning probe microscopy, and first-principles calculations on tantalum oxide memristors, we reveal that the formation and stability of conductive filaments crucially depend on the thermodynamic stability of the amorphous oxygen-rich and oxygen-poor compounds, which undergo composition phase separation. Including the previously neglected effects of this amorphous phase separation reconciles unexplained discrepancies in retention and enables predictive design of key performance indicators such as retention stability. Furthermore, this result emphasizes non-ideal thermodynamic interactions as key design criteria in post-digital devices with defect densities substantially exceeding those of today’s covalent semiconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Memory Effect on the Synthesis of Perovskite-Type Li-Ion Conductor Li x La 2/3– x /3 TiO 3 (LLTO)

The structural chemistry of the solid ion-conducting Li x La 2/3–x/3 TiO 3 (LLTO) is rich with various polymorphs related to atomic segregation. Here, we explored the LLTO reaction pathway from various structurally related precursors (La 2 LiO 3 H, Li 2 TiO 3 , and Li 4 Ti 5 O 12 ), focusing on the effects of LLTO-like structural motifs in precursors using a combination of experimental and computational techniques. Density functional theory (DFT) calculations revealed that the failure of syntheses to produce LLTO below 1300 °C is due to the presence of multiple competing low-energy phases that result in competitive byproduct formation. In all syntheses where T = 1300 °C, LLTO was the sole product; however, varying phase fractions of I4/mcm and P4/nbm polymorphs and double-perovskite P4/mmm can be obtained depending on the synthesis route. This is an unusual result as at 1300 °C, LLTO should only be the ideal cubic Pm-3m perovskite structure, yet there appears to be a memory effect from the different precursors resulting in the unique phase selectivity and stabilization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Dissolution enables dolomite crystal growth near ambient conditions

Crystals grow in supersaturated solutions. A mysterious counterexample is dolomite CaMg(CO 3 ) 2 , a geologically abundant sedimentary mineral that does not readily grow at ambient conditions, not even under highly supersaturated solutions. Using atomistic simulations, we show that dolomite initially precipitates a cation-disordered surface, where high surface strains inhibit further crystal growth. However, mild undersaturation will preferentially dissolve these disordered regions, enabling increased order upon reprecipitation. Furthermore, our simulations predict that frequent cycling of a solution between supersaturation and undersaturation can accelerate dolomite growth by up to seven orders of magnitude. We validated our theory with in situ liquid cell transmission electron microscopy, directly observing bulk dolomite growth after pulses of dissolution. This mechanism explains why modern dolomite is primarily found in natural environments with pH or salinity fluctuations. More generally, it reveals that the growth and ripening of defect-free crystals can be facilitated by deliberate periods of mild dissolution.

Kim, Joonsoo↗
DOE OSTI2022

Dataset of solution-based inorganic materials synthesis procedures extracted from the scientific literature

The development of a materials synthesis route is usually based on heuristics and experience. A possible new approach would be to apply data-driven approaches to learn the patterns of synthesis from past experience and use them to predict the syntheses of novel materials. However, this route is impeded by the lack of a large-scale database of synthesis formulations. In this work, we applied advanced machine learning and natural language processing techniques to construct a dataset of 35,675 solution-based synthesis procedures extracted from the scientific literature. Each procedure contains essential synthesis information including the precursors and target materials, their quantities, and the synthesis actions and corresponding attributes. Every procedure is also augmented with the reaction formula. Through this work, we are making freely available the first large dataset of solution-based inorganic materials synthesis procedures.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Dynamic Barriers to Crystallization of Calcium Barium Carbonates

Metastable carbonates play important roles in geochemistry, biomineralization and serve as model systems for nonclassical theories of nucleation and growth. Balcite (Ca 0.5 Ba 0.5 CO 3 ) is a remarkable carbonate phase that is isostructural with a high-temperature modification of calcite (CaCO 3 ), yet can be synthesized at ambient conditions. Here, we investigate crystallization pathways in the Ba-Ca-CO 3 -H 2 O system, with a focus on the transformation of amorphous calcium barium carbonate (ACBC) to balcite and subsequent decomposition into the equilibrium calcite (CaCO3) and witherite (BaCO 3 ) phases. Density functional theory calculations show that balcite is an unstable solid solution (Ca 1-x BaxCO 3 , R 3¯ m) in the range 0.17 < x < 0.5, but is accessible through the amorphous ACBC precursor for x ≲ 0.5, and predict its decomposition into calcite and witherite. We confirm this pathway experimentally but found demixing to proceed slowly and remain incomplete even after 9 months. Nucleation kinetics of balcite from ACBC was assessed using a microfluidic assay, where increasing barium content led to a surprising increase in the balcite nucleation rate, despite decreasing thermodynamic driving force. We attribute crystallization rates that dramatically accelerate with time to changes in interfacial structure and composition during coarsening of the amorphous precipitate. By carefully quantifying the thermodynamic and kinetic contributions in the multistep crystallization of a metastable carbonate, we produce insights that allow us to better interpret the formation and persistence of metastable minerals in natural and synthetic environments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Observing and Modeling the Sequential Pairwise Reactions that Drive Solid‐State Ceramic Synthesis

Abstract Solid‐state synthesis from powder precursors is the primary processing route to advanced multicomponent ceramic materials. Designing reaction conditions and precursors for ceramic synthesis can be a laborious, trial‐and‐error process, as heterogeneous mixtures of precursors often evolve through a complicated series of reaction intermediates. Here, ab initio thermodynamics is used to model which pair of precursors has the most reactive interface, enabling the understanding and anticipation of which non‐equilibrium intermediates form in the early stages of a solid‐state reaction. In situ X‐ray diffraction and in situ electron microscopy are then used to observe how these initial intermediates influence phase evolution in the synthesis of the classic high‐temperature superconductor YBa 2 Cu 3 O 6+ x (YBCO). The model developed herein rationalizes how the replacement of the traditional BaCO 3 precursor with BaO 2 redirects phase evolution through a low‐temperature eutectic melt, facilitating the formation of YBCO in 30 min instead of 12+ h. Precursor selection plays an important role in tuning the thermodynamics of interfacial reactions and emerges as an important design parameter in planning kinetically favorable synthesis pathways to complex ceramic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Kinetic origins of the metastable zone width in the manganese oxide Pourbaix diagram

Pourbaix diagrams show solid–aqueous phase stability as a function of pH and redox potential and can be a valuable tool to guide the hydrothermal synthesis of transition metal oxides. However, the Pourbaix diagram is based on thermodynamics, and nucleation kinetics are not readily apparent in this framework. Here, we conduct a combined experimental and theoretical study to measure the onset of MnO 2 precipitation from an MnO 4 - (aq) solution at various pH conditions, which we then compare against Pourbaix diagram phase boundaries. Using a combination of in situ X-ray absorption spectroscopy and X-ray wide-angle scattering, we directly observe the transformation kinetics from the tetrahedral MnO 4 - (aq) ion to octahedrally coordinated Mn pre-nuclei, as well as its initiation into crystalline δ'-MnO 2 at various pH. The kinetics of octahedral-Mn precursor availability is observed to govern induction times of crystalline MnO 2 nucleation, which results in a metastable zone width in the Mn–H 2 O Pourbaix diagram. These results suggest that synthesis conditions often need to be prepared far beyond the phase boundaries in a Pourbaix diagram to initiate crystallization within a reasonable timescale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Strain-induced creation and switching of anion vacancy layers in perovskite oxynitrides

Perovskite oxides can host various anion-vacancy orders, which greatly change their properties, but the order pattern is still difficult to manipulate. Separately, lattice strain between thin film oxides and a substrate induces improved functions and novel states of matter, while little attention has been paid to changes in chemical composition. Here we combine these two aspects to achieve strain-induced creation and switching of anion-vacancy patterns in perovskite films. Epitaxial SrVO 3 films are topochemically converted to anion-deficient oxynitrides by ammonia treatment, where the direction or periodicity of defect planes is altered depending on the substrate employed, unlike the known change in crystal orientation. First-principles calculations verified its biaxial strain effect. Like oxide heterostructures, the oxynitride has a superlattice of insulating and metallic blocks. Given the abundance of perovskite families, this study provides new opportunities to design superlattices by chemically modifying simple perovskite oxides with tunable anion-vacancy patterns through epitaxial lattice strain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗