Search NASA⌕ Search

Engineering topics

Sun, X

Publications and source records attributed to Sun, X.

27 records · Page 2

Flux Rope Dynamics: Experimental Study of Bouncing and Merging

We show experimentally for the first time that two mutually attracting flux ropes may bounce back instead of merging together, leading to a variety of dynamics not expected from a two-dimensional model. Attraction forces due to flux rope currents compete with repulsion from field line bending of in-plane and out-of-plane magnetic fields and elastic plasma compression. Bouncing dynamics occurs if the line-bending force due to an out-of-plane field dominates. Otherwise, the ropes merge. Further reduction in the field line-bending force results in violently erratic magnetic states.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of velocity shear and ion viscosity profile in a magnetohydrodynamic plasma jet

Time-dependent, two-dimensional profiles of the axial flow velocity, density, electron temperature, and magnetic field components are measured at two axial locations in a screw pinch plasma column of the reconnection scaling experiment. The results show that the ion momentum flux for a given column radius is dissipated by the ion-ion Coulomb scattering viscosity due to a significant radial shear of the axial velocity. By comparing the terms of the magnetohydrodynamic momentum balance equation, radial profile of ion viscosity is determined. Chord-integrated ion temperature measurements performed at several radial locations using Doppler broadening spectroscopy show ion temperature of about 1 eV. Measured ion viscosity agrees within a factor of 2 with the classical Braginskii expectations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Time-resolved measurements of double layer evolution in expanding plasma

Observations in steady-state plasmas confirm predictions that formation of a current-free double layer in a plasma expanding into a chamber of larger diameter is accompanied by an increase in ionization upstream of the double layer. The upstream plasma density increases sharply at the same driving frequency at which a double layer appears. For driving frequencies at which no double layer appears, large electrostatic instabilities are observed. Time-resolved measurements in pulsed discharges indicate that the double layer initially forms for all driving frequencies. However, for particularly strong double layers, instabilities appear early in the discharge and the double layer collapses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sensor Development and Readout Prototyping for the STAR Pixel Detector

The STAR experiment at the Relativistic Heavy Ion Collider (RHIC) is designing a new vertex detector. The purpose of this upgrade detector is to provide high resolution pointing to allow for the direct topological reconstruction of heavy flavor decays such as the D{sup 0} by finding vertices displaced from the collision vertex by greater than 60 microns. We are using Monolithic Active Pixel Sensor (MAPS) as the sensor technology and have a coupled sensor development and readout system plan that leads to a final detector with a <200 {micro}s integration time, 400 M pixels and a coverage of -1 < {eta} < 1. We present our coupled sensor and readout development plan and the status of the prototyping work that has been accomplished.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Advanced micromechanical model for transformation-induced plasticity steels with application of in-situ high-energy x-ray diffraction method.

Compared to other advanced high-strength steels, transformation-induced plasticity (TRIP) steels exhibit better ductility at a given strength level and can be used to produce complicated automotive parts. This enhanced formability comes from the transformation of retained austenite to martensite during plastic deformation. In this study, as a first step in predicting optimum processing parameters in TRIP steel productions, a micromechanical finite element model is developed based on the actual microstructure of a TRIP 800 steel. The method uses a microstructure-based representative volume element (RVE) to capture the complex deformation behavior of TRIP steels. The mechanical properties of the constituent phases of the TRIP 800 steel and the fitting parameters describing the martensite transformation kinetics are determined using the synchrotron-based in-situ high-energy X-ray diffraction (HEXRD) experiments performed under a uniaxial tensile deformation. The experimental results suggest that the HEXRD technique provides a powerful tool for characterizing the phase transformation behavior and the microstress developed due to the phase-to-phase interaction of TRIP steels during deformation. The computational results suggest that the response of the RVE well represents the overall macroscopic behavior of the TRIP 800 steel under deformation. The methodology described in this study may be extended for studying the effects of the various processing parameters on the macroscopic behaviors of TRIP steels.

36 MATERIALS SCIENCE↗

A three dimensional probe positioner

In order to sort out the physics that is important in many plasma experiments, data in three dimensions (3D) are becoming necessary. Access to the usual cylindrical vacuum vessel is typically restricted to radially or axially insertable probes that can pivot. The space that can be explored usually has significant restrictions either because probe travel must be along a travel path, or a 'wobbly' probe positioner requires one to map between a moveable coordinate system and a preferred laboratory coordinate system. This could for example introduce errors in measurements of vector quantities such as magnetic field or flow. We describe the design and implementation of a 3D probe positioner that slides in two dimensions on a double O-ring seal and radially inserts along the third dimension. The net result is that a 3D space can be explored in a laboratory Cartesian reference frame.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Synthesis of nanoscale CN{sub x}/TiAlN multilayered coatings by ion-beam-assisted deposition

CN{sub x}/TiAlN multilayered coatings with different nanoscale modulation periods and ratio of CN{sub x} within each period were prepared by ion-beam-assisted deposition at room temperature. Auger electron spectroscopy (AES), x-ray diffraction (XRD), and nanoindenter and a profiler were used to characterize the microstructure and mechanical properties of the coatings. The low-angle XRD pattern and AES indicated a well-defined multilayered structure of the coating. Although monolithic CN{sub x} and TiAlN coatings formed amorphous and nanocrystalline structures, respectively, the CN{sub x}/TiAlN multilayers exhibited coherent epitaxial growth due to the mutual growth-promoting effect at small CN{sub x} layer thickness (<0.6 nm). At modulation period {lambda}=2.83 nm and CN{sub x} thickness of 10% within each period, the multilayers exhibited strong TiAlN (111) and weak AlN (111) textures and showed the highest hardness (32 GPa), elastic modulus (409 GPa), and critical fracture load (65.7 mN)

36 MATERIALS SCIENCE↗