Search NASA⌕ Search

Engineering topics

Sun, Xiuquan

Publications and source records attributed to Sun, Xiuquan.

Understanding ion-ion interactions in bulk and aqueous interfaces using molecular simulations

In addition to its scientific significance, the distribution of ions in the bulk and at aqueous interfaces also is very important for practical reasons. A quantitative description of the ionic distribution and how to describe interactions between them in different environments remain a challenge are the subjects of current debate. In this study, we found that interionic potentials of mean force (PMF) and interfacial properties are very sensitive to the ion-ion interaction potential models. Our computed Sr2+-Cl- PMF shows a no contact ion-pair state and a shallow solvent-separated ion-pair state. In addition, we were able to quantitatively capture the experimental x-ray reflectivity results of the aqueous salt interface of Sr2+-Cl- ion-pair system, and predict the reflectivity for Sr2+-Br- and Sr2+-I- systems. In this paper, we provide a detailed physical description of the interfacial structure of these systems.. This work was supported by the U.S. Department of Energy (DOE), Office of Basic Energy Sciences (BES), Division of Chemical Sciences, Geosciences and Biosciences. Pacific Northwest National Laboratory is a multiprogram national laboratory operated for DOE by Battelle.

Dang, Liem X↗

Understanding nanofluid stability through molecular simulation

We performed molecular dynamics simulations to study solvation of a nanoparticle and nanoparticle-nanoparticle interactions in an n-hexane solution. Structural signatures are barely observed between the nanoparticle and n-hexane molecules because of weak binding and steric effects. The dynamic properties of the n-hexane molecule, on the other hand, are significantly influenced by the solvated nanoparticle. The diffusion of n-hexane molecules inside the nanoparticle is significantly decreased mainly because of the loss of dimensions of translation. Because one translational degree of freedom is lost by colliding with the wall of nanoparticle, the n-hexane molecules outside the nanoparticle diffuse 30% slower than the molecules in pure solution. The computed free energy profiles illustrate that the arrangement of the nanoparticles in bulk n-hexane solution are dependent on the orientation and functional group. We found that the n-hexane solvent exerts some effects on the interactions between the solvated nanoparticles. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences and by the Office of Energy Efficiency and Renewable Energy, Geothermal Technologies Program. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle.

Dang, Liem X↗

Development of ions-TIP4P-Ew force fields for molecular processes in bulk and at the aqueous interface using molecular simulations

Monovalent ions such as alkalis and halides play essential roles in aqueous and biological systems; thus a proper representation of these ions is significant in explicit molecular dynamics simulations. In this study, we re-parameterize ions interaction potentials based on TIP4PEw water at 298K with the additive non-polarizable models. The charges of the ions were kept as +1 for alkali metal ions (Li+, Na+, K+, Rb+, Cs+) and -1 for halides (F-, Cl-, Br-, I-). The experimental enthalpies of hydration were used to optimize the potential parameters. To validate the potential models, extensive molecular dynamics calculations were carried out to examine the bulk, interfacial, static structural and dynamical properties of the aqueous ionic solutions. These included radial distribution functions, angle distributions, velocity autocorrelation functions, diffusion coefficients, binding energies, mean residence time, surface potential, and potential of mean force. The computed results agreed with the experimental data and observations. LXD was funded by the Division of Chemical Sciences, Geosciences and Biosciences, Office of Basic Energy Sciences, US Department of Energy. Battelle operates the Pacific Northwest National Laboratory for the U.S. Department of Energy.

Peng, Tiefeng↗

Computational study of ion distributions at the air/liquid methanol interface

Molecular dynamic simulations with polarizable potentials were performed to systematically investigate the distribution of NaCl, NaBr, NaI, and SrCl2 at the air/liquid methanol interface. The density profiles indicated that there is no substantial enhancement of anions at the interface for the NaX systems in contrast to what was observed at the air/aqueous interface. The surfactant-like shape of the larger more polarizable halide anions is compensated by the surfactant nature of methanol itself. As a result, methanol hydroxy groups strongly interacted with one side of polarizable anions, in which their induced dipole points, and methanol methyl groups were more likely to be found near the positive pole of anion induced dipoles. Furthermore, salts were found to disrupt the surface structure of methanol, reducing the observed enhancement of methyl groups at the outer edge of the air/liquid methanol interface. With the additional of salts to methanol, the computed surface potentials increased, which is in contrast to what is observed in corresponding aqueous systems, where the surface potential decreases with the addition of salts. Both of these trends have been indirectly observed with experiments. This was found to be due to the propensity of anions for the air/water interface that is not present at the air/liquid methanol interface. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

10 SYNTHETIC FUELS↗

Computational study of hydrocarbon adsorption in metal-organic framework Ni2(dhtp)

Molecular dynamic simulations were carried out to study the sorption, structural properties, and diffusivities of n-hexane and cyclohexane adsorbed in Ni2(dhtp). The results indicated strong interactions between the alkanes and the host material. The free energy perturbation method was employed to investigate the adsorption free energies of methane, ethane, n-butane, n-hexane and cyclohexane. For linear alkanes, the free energy lowered as the length of the carbon chain increased. Also, the adsorption of n-hexane was preferred over cyclohexane, due to its ability to rearrange its structure to maximize contacts with the host. Furthermore, due to the large pore size of Ni2(dhtp), higher loadings of alkanes did not significantly affect the alkane structure, and enhanced the free energy of adsorption for subsequent alkanes being loaded. According to our studies, Ni2(dhtp) has a very promising potential for adsorption and storage of alkanes. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

03 NATURAL GAS↗

Molecular mechanism of hydrocarbons binding to the metal–organic framework

The adsorption and diffusivity of methane, ethane, n-butane, n-hexane and cyclohexane in a metal organic framework (MOF) with the organic linker tetrakis[4-(carboxyphenyl)oxamethyl]methane, the metal salt, Zn2+, and organic pillar, 4,4’-bipyridin was studied using molecular dynamics simulations. For the n-alkanes, the longer the chain, the lower the free energy of adsorption, which was attributed to a greater number of contacts between the alkane and MOF. Cyclohexane had a slightly higher adsorption free energy than n-hexane. Furthermore, for cyclo- and n-hexane, there were no significant differences in adsorption free energies between systems with low to moderate loadings. The diffusivity of the n-alkanes was found to strongly depend on chain length with slower diffusion for longer chains. Cyclohexane had no effective diffusion, suggesting that the selectivity the MOF has towards n-hexane over cyclohexane is the result of kinetics instead of energetics. This work was supported by the U.S. Department of Energy's (DOE) Office of Basic Energy Sciences, Chemical Sciences program. The Pacific Northwest National Laboratory is operated by Battelle for DOE.

03 NATURAL GAS↗

Grand Canonical Monte Carlo studies of CO2 and CH4 adsorption in p-tert-butylcalix[4]arene

Grand Canonical Monte Carlo (GCMC) simulations were performed for single component isotherms of CO2 and CH4 in the p-tert-butylcalix[4]arene (TBC4) structure. Comparison with literature data for adsorption used the Peng-Robinson equation of state to map simulated fugacities to experimentally determined pressures. CO2 binding in the high-pressure structure of TBC4 (TBC4-H) occurs in two distinct waves. The cage sites in TBC4 completely fill, followed by the filling of interstitial sites, resulting in the sum of two Langmuir isotherms being the best way to describe the total absorption isotherms. Our simulation results capture the essential experimental feature that the cage sites are the major contributor to the absorption isotherms, and the contribution of interstitial sites are significantly less. We found that CH4 does not exhibit the same two site binding characteristic and has a smaller temperature dependence, which arises from a smaller negative entropy change upon absorption compared with CO2. Our calculations give higher binding than observed experimentally for the cage site but lower binding for the interstitial site. We also demonstrate that by rescaling the interaction between CO2 and the lattice, the results can reproduce the experimental data well. This work was performed at the Pacific Northwest National Laboratory (PNNL) and was supported by the Division of Chemical Sciences, Office of Basic Energy Sciences, U.S. Department of Energy (DOE). PNNL is operated by Battelle for the DOE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational studies of aqueous interfaces of SrCl2 salt solutions

The electron density profiles and the corresponding surface structures of an aqueous interface of SrCl2 salt solution were computed using molecular dynamics simulations. We used both polarizable and non-polarizable potential models to describe molecular interactions. The results demonstrate that the polarizable models captured the essential features of the x-ray reflectivity experimental data while the corresponding non-polarizable models could not. While there is qualitative agreement in the shape of the x-ray reflectivity curve, we find that quantitative agreement is still forthcoming. We suggest that improved agreement can be achieved if the contribution of Sr2+ ions to the total electron density profile is reduced, but not eliminated. This work was performed at Pacific Northwest National Laboratory under the auspices of the Division of Chemical Sciences, Office of Basic Energy Sciences, U.S. Department of Energy (DOE). Pacific Northwest National Laboratory is operated by Battelle for the DOE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Reorientation Mechanism of Hydroxide Ions in Water: A Molecular Dynamics Study

simulations with polarizable potential models. Two major solvation structures of OH- were suggested by our study. One of which has four accepted hydrogen bonds from water and the other has five accepted hydrogen bonds. A weak hydrogen bond donated by the hydroxide ion was observed in our simulations. The simulated reorientation relaxation times of OH- are in qualitative agreement with CTTS experiments. We propose a two-step mechanism for the reorientation of hydroxide ions in water. First, the reorientation of OH- is initiated by the coupled translation with water molecules in its first solvation shell. Second, the OH- hydrogen relaxes to the minimum energy state. The rate-limiting step in this mechanism is the first step, translation diffusion of the first solvation shell water molecules. The activation energies of reorientation of OH- and translation of H2O determined from our simulations are 22.5 and 18.5 kJ/mol, respectively. These values fall in the range of the measured data. This work was supported by the US Department of energy's Office of Basic Energy Sciences, Chemical Sciences program. Pacific Northwest national Laboratory is operated by Battelle for the US Department of Energy.

08 HYDROGEN↗

Solvation of Dimethyl Succinate in a Sodium Hydroxide Aqueous Solution. A Computational Study

Molecular dynamics simulations were carried out to study dimethyl-succinate/water/NaOH solutions. The potential of mean force method is used to determine the transport mechanism of a dimethyl-succinate (a diester) molecule across the aqueous/vapor interface. The computed number density profiles show a strong propensity for the diester molecules to congregate at the interface with the solubility of the diester increasing with increasing NaOH concentration. It is observed that the major contribution to the interfacial solvation free energy minimum is from van der Waals interactions. Thus, even at higher NaOH concentrations, the increasing electrostatic interaction between the diester and ions is not large enough to overcome the Lennard-Jones (LJ) interactions to favor the solvation of diester in bulk solutions. The calculated solvation free energies are found to be -2.6 ~ -3.5 kcal/mol in variant concentrations of NaOH aqueous solutions. These values are in qualitative agreement with the corresponding experimental measurements. The computed surface potential indicates that the contribution of diester molecules to the total surface potential is about 25%, with the major contribution from interfacial water molecules. This work was supported by the US Department of Energy (DOE) Office of Basic Energy Sciences, Chemical Sciences program. Pacific Northwest National Laboratory is operated by Battelle for DOE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational studies of load-dependent guest dynamics and free energies of inclusion for CO2 in low-density p-tert-butylcalix[4]arene at loadings up to 2:1

The structure, dynamics, and free energies of absorption of CO2 by a low density structure of Calixarene p-tert-butylalix[4]arene (TBC4) at loadings up to 2:1 CO2:TBC4 have been studied using molecular dynamics simulations. From the computed radial distribution functions, we notice that the 1:1 loading peak shows a single broad peak from the caged CO2 separation. At higher temperature, the peak is only slightly broadened from the 300 K peak and the shoulder around 11 Å is reduced. The radial distribution function of the 2:1 loading shows a prominent sharp peak around 3 Å and a second peak around 4 Å, indicating a dimer center-of-mass separation of 3 Å that is smaller than that of optimized gas-phase dimer. This result suggests that dimer is sufficiently stabilized by the interaction with the TBC4. The relative angle distributions for paired CO2 molecules are flat and do not show a preference for the crossed geometry found in the vacuum dimer at 3 Å. Angular distributions relative to the TBC4 symmetry axis show a preference for alignment tilted relative to the TBC4 axis closer to the plane of the phenyl rings of the TBC4 cage. Translational velocity autocorrelation calculations show a single peak under all conditions studied with very little change with temperature. Rotational velocity autocorrelation calculations show relatively little structure with significant tailing to low frequencies indicating rotation is hindered in the conical TBC4 cavity in the low density structure. The free energy of inclusion for CO2 in this TBC4 structure at 300 and 450 K for various loadings show the inclusion of a single CO2 in the system is favorable at -4.2 kcal/mol at 300 K and -1.5 kcal/mol at 450 K. The fully loaded 1:1 CO2:TBC4 system is slightly less favorable at -3.6 and -1.0 kcal/mol for 300 and 450 K respectively. The first CO2 added beyond 1:1 loading shows a significant drop in absorption energy to -1.8 and +1.5 kcal/mol at 300 and 450 K. These data are consistent with experimental results showing that low-density structures of TBC4 are able to absorb CO2 at loadings greater than 1:1 but retention is lower than for 1:1 loaded systems indicating the energy of inclusion for addition of the CO2 above 1:1 is less favorable. This work was supported by the U.S. Department of Energy's (DOE) Office of Basic Energy Sciences, Chemical Sciences program. The Pacific Northwest National Laboratory is operated by Battelle for DOE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗