Engineering topics

Sunderland, Dion J.

Publications and source records attributed to Sunderland, Dion J..

3 records

DOE OSTI2024

Metallic Coating of Cerium Oxide Microspheres

The ability to remove heat is paramount to nuclear fuel performance and longevity. Retaining fission product and separating fuel from reactor coolant and the environment is also necessary to prevent radiological contamination. Conventional nuclear fuel for commercial light water reactors and radioisotope power systems (RPS) is composed of oxide powders pressed into a pellet (cm-scale) and then sealed into a metal cladding to confine the fuel. What typical fuels lack is a method to surround each particle of nuclear fuel in metal, thus providing a more intimate protection layer for accident tolerance and boosting the thermal extraction from the fuel element. In such a way, metal-coated fuel particles increase heat extraction efficiency over clad-pellet designs while increasing the accident tolerance of the fuel. Metal oxide microspheres have wide-ranging applications, including the realm of fuels for nuclear reactors and RPS. Microspheres of uranium oxide/uranium carbide, mixed uranium/plutonium oxides, transuranics, and thorium fuels have been extensively studied. Pacific Northwest National Laboratory has also demonstrated the production of 238 PuO 2 microspheres for RPS applications. Metal-coated oxide microsphere fuels may also be attractive for other applications such as nuclear thermal rockets, future nuclear reactor designs, and catalysts.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2022

A Very High Temperature Lead Cooled Microreactor Concept using Advanced Materials and Thermophotovoltaics Direct Energy Conversion Technology

Recently, significant advances have been made in designing high-temperature capable nuclear fuels. In parallel, important advances have occurred in design of nanophotonic structures (coatings) with ability to shape the frequencies of light being emitted from hot surfaces. In this project, we bring these materials advances together into a design for a new direct conversion nuclear powered system with high thermodynamic efficiency, inherent safety, and unprecedented reduction in size and weight relative to current designs. The concept involves using the heat generated from nuclear fission to raise the temperature of a selective thermal emitter to >800°C. The selective emitter shifts the normal broad brand emissions of light from its hot surface into the correct near- and mid-IR bands that produce electricity with inexpensive photovoltaic cells. We have designed a new annular flow Lead Fast Reactor (LFR) that minimizes overall reactor/power conversion footprint. The results indicate that the overall microreactor/power-system design offers a 2X reduction in size over existing technology that is based on the sCO 2 reverse compression Brayton cycle. Additionally, the only moving part in our design is a circulation pump to cool the PVT panels.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2019

PIE of Cycle 13 316SS Cladding Using Aberration Corrected STEM Image and Analys

Optical, SEM and TEM analysis confirmed the presence of moderate sensitization in the 20% cold worked 316SS after the iron aluminide coating was applied. The Cr depletion occurs on the grain boundaries between the closely spaced carbides, and at the interface between the carbides and matrix. Cr depletion varied from locally along the grain boundaries, in many cases showing levels down to 15 wt%, but a few isolated regions had depletion levels down to 12.5 wt%. Optical and SEM images taken from a weld heat affected zone revealed the recrystallization occurred after an end plug cap had been welded to the coated cladding. Irradiation did not affect the carbides in a noticeable manner, but radiation-induced segregation/depletion altered the Cr depletion profiles by removing the wide Cr depletion profile, and replacing it with a much deeper, more narrow profile. Cr levels were depleted to 8-10 wt%, Ni and Si were enriched to levels of 40 wt% and 12 wt% respectively. Substantial precipitation formed in the matrix, and on line dislocations in the matrix and on grain boundary dislocations. Voids were observed in the upper region of the TPBAR where the irradiation temperature exceeds 320C. The levels of Cr depletion and Ni/Si enrichment indicate a material in a state susceptible to irradiation assisted stress corrosion cracking.

316SS cladding↗