Engineering topics

Sundstrom, Eric R.

Publications and source records attributed to Sundstrom, Eric R..

11 records

DOE OSTI2024

Utilization of formic acid by extremely thermoacidophilic archaea species

The exploration of novel hosts with the ability to assimilate formic acid, a C1 substrate that can be produced from renewable electrons and CO 2 , is of great relevance for developing novel and sustainable biomanufacturing platforms. Formatotrophs can use formic acid or formate as a carbon and/or reducing power source. Formatotrophy has typically been studied in neutrophilic microorganisms because formic acid toxicity increases in acidic environments below the pKa of 3.75 (25°C). Because of this toxicity challenge, utilization of formic acid as either a carbon or energy source has been largely unexplored in thermoacidophiles, species that possess the ability to produce a variety of metabolites and enzymes of high biotechnological relevance. Here we investigate the capacity of several thermoacidophilic archaea species from the Sulfolobales order to tolerate and metabolize formic acid. Metallosphaera prunae, Sulfolobus metallicus and Sulfolobus acidocaldarium were found to metabolize and grow with 1–2 mM of formic acid in batch cultivations. Formic acid was co-utilized by this species alongside physiological electron donors, including ferrous iron. To enhance formic acid utilization while maintaining aqueous concentrations below the toxicity threshold, we developed a bioreactor culturing method based on a sequential formic acid feeding strategy. By dosing small amounts of formic acid sequentially and feeding H 2 as co-substrate, M. prunae could utilize a total of 16.3 mM of formic acid and grow to higher cell densities than when H 2 was supplied as a sole electron donor. These results demonstrate the viability of culturing thermoacidophilic species with formic acid as an auxiliary substrate in bioreactors to obtain higher cell densities than those yielded by conventional autotrophic conditions. Our work underscores the significance of formic acid metabolism in extreme habitats and holds promise for biotechnological applications in the realm of sustainable energy production and environmental remediation.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Enhanced microbial production of protocatechuate from engineered sorghum using an integrated feedstock-to-product conversion technology

Building a stronger bioeconomy requires production capabilities that are largely generated through microbial genetic engineering. Plant feedstocks can additionally be genetically engineered to generate desirable feedstock traits and provide precursors for direct microbial conversion into desired products. The oleaginous yeast Rhodosporidium toruloides is a promising organism for this type of conversion as it can grow on a wide range of deconstructed biomass and consume a variety of carbon sources. Here, we leveraged R. toruloides native p-coumaric acid consumption pathway to accumulate protocatechuate (PCA) from 4-hydroxybenzoate (4HBA) released from a sorghum feedstock line genetically engineered to overproduce 4HBA. We did so by generating and evaluating an R. toruloides strain that accumulates PCA, RSΔ12623. We then show that at two scales a cholinium lysinate pretreatment with enzymatic saccharification successfully extracts 95% of the 4HBA from the engineered sorghum biomass while producing deconstructed lignin that can be more efficiently depolymerized in a subsequent thermochemical reaction. We also demonstrate that strain RSΔ12623 can convert more than 95% of 4HBA to PCA while consuming >95% of the glucose and >80% of the xylose present in sorghum hydrolysates. Finally, to evaluate the scalability of such fermentations, we conducted the conversion of 4HBA to PCA in a 2 L bioreactor under controlled conditions. Importantly, this work demonstrates the potential of purposefully producing aromatic precursors in planta that can be liberated during biomass deconstruction for direct microbial conversion to desirable bioproducts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Biosynthesis of polycyclopropanated high energy biofuels

Cyclopropane-functionalized hydrocarbons are excellent fuels due their high energy density. However, the organic synthesis of these molecules is challenging and harmful to the environment. In this work we produced polycyclopropanated fatty acids in bacteria. These molecules can be easily converted into renewable fuels for high energy applications such as shipping, long-haul transport, aviation, and rocketry. We explored the chemical diversity encoded in the genome of thousands of bacteria to identify and repurpose naturally occurring cyclopropanated molecules. We identified a set of candidate iterative polyketide synthases (iPKSs) predicted to produce polycyclopropanated fatty acids (POP-FAs), expressed these PKSs in Streptomyces coelicolor and produced the POP-FAs. We determined the structure of the molecules and increased their production 22-fold. Polycyclopropanated fatty acid methyl esters (POP-FAMEs) were obtained by methyl esterifying the POP-FAs. Finally, we calculated that our POP fuel candidates can have energy densities of more than 50 MJ/L. Our research shows that POP-FAMEs and other polyketide derived POPs have the energetic properties for energy-demanding applications for which sustainable alternatives are scarce.

09 BIOMASS FUELS↗

DOE OSTI2021

Top 13 Blendstocks Derived from Biomass for Mixing-Controlled Compression-Ignition (Diesel) Engines: Bioblendstocks with Potential for Decreased Emissions and Improved Operability

Reducing the impacts of medium- and heavy-duty (MD/HD) ground transportation can be enabled by fuel-engine combinations that use lower compression ignition liquid fuels and reduce criteria pollutant emissions. Fuels and blendstocks combined with advanced engine technologies could reduce the cost of ownership and the emission of pollutants, including soot, nitrogen oxides (NOx) and greenhouse gases (GHGs), from MD/HD vehicles. This report describes the evaluation and screening of MD/HD mixing-controlled compression ignition (MCCI) biofuel candidates for further development and commercialization. The report is aimed at 1) biofuel researchers looking to better understand options to reduce criteria pollutant and GHG emissions while maintaining efficiency and meeting requirements for engine operability and 2) engine researchers who want to evaluate biofuels that meet diesel fuel properties for their impact on conventional and advanced diesel combustion strategies.

09 BIOMASS FUELS↗

DOE OSTI2021

Further engineering of R. toruloides for the production of terpenes from lignocellulosic biomass

Abstract Background Mitigation of climate change requires that new routes for the production of fuels and chemicals be as oil-independent as possible. The microbial conversion of lignocellulosic feedstocks into terpene-based biofuels and bioproducts represents one such route. This work builds upon previous demonstrations that the single-celled carotenogenic basidiomycete, Rhodosporidium toruloides , is a promising host for the production of terpenes from lignocellulosic hydrolysates. Results This study focuses on the optimization of production of the monoterpene 1,8-cineole and the sesquiterpene α-bisabolene in R. toruloides . The α-bisabolene titer attained in R. toruloides was found to be proportional to the copy number of the bisabolene synthase (BIS) expression cassette, which in turn influenced the expression level of several native mevalonate pathway genes. The addition of more copies of BIS under a stronger promoter resulted in production of α-bisabolene at 2.2 g/L from lignocellulosic hydrolysate in a 2-L fermenter. Production of 1,8-cineole was found to be limited by availability of the precursor geranylgeranyl pyrophosphate (GPP) and expression of an appropriate GPP synthase increased the monoterpene titer fourfold to 143 mg/L at bench scale. Targeted mevalonate pathway metabolite analysis suggested that 3-hydroxy-3-methyl-glutaryl-coenzyme A reductase (HMGR), mevalonate kinase (MK) and phosphomevalonate kinase (PMK) may be pathway bottlenecks are were therefore selected as targets for overexpression. Expression of HMGR, MK, and PMK orthologs and growth in an optimized lignocellulosic hydrolysate medium increased the 1,8-cineole titer an additional tenfold to 1.4 g/L. Expression of the same mevalonate pathway genes did not have as large an impact on α-bisabolene production, although the final titer was higher at 2.6 g/L. Furthermore, mevalonate pathway intermediates accumulated in the mevalonate-engineered strains, suggesting room for further improvement. Conclusions This work brings R. toruloides closer to being able to make industrially relevant quantities of terpene from lignocellulosic biomass.

09 BIOMASS FUELS↗

DOE OSTI2021

Method to produce a polysaccharide gel by increasing the pH of the polysaccharide

The present invention provides for a method of producing a polysaccharide gel comprising: (a) culturing or growing a cyanobacterium or a mixture of cyanobacteria species in a medium under conditions such that the cyanobacterium or the mixture of cyanobacteria species produces a polysaccharide or a mixture of polysaccharides, (b) optionally separating the polysaccharide or the mixture of polysaccharides from the medium and/or the cyanobacterium or the mixture of cyanobacteria species, and (c) increasing the pH of the polysaccharide or the mixture of polysaccharides such that the polysaccharide or the mixture of polysaccharides forms a gel.

Mirsiaghi, Mona↗

DOE OSTI2020

Conversion of poplar biomass into high-energy density tricyclic sesquiterpene jet fuel blendstocks

In an effort to ensure future energy security, reduce greenhouse gas emissions and create domestic jobs, the US has invested in technologies to develop sustainable biofuels and bioproducts from renewable carbon sources such as lignocellulosic biomass. Bio-derived jet fuel is of particular interest as aviation is less amenable to electrification compared to other modes of transportation and synthetic biology provides the ability to tailor fuel properties to enhance performance. Specific energy and energy density are important properties in determining the attractiveness of potential bio-derived jet fuels. For example, increased energy content can give the industry options such as longer range, higher load or reduced takeoff weight. Energy-dense sesquiterpenes have been identified as potential next-generation jet fuels that can be renewably produced from lignocellulosic biomass. We developed a biomass deconstruction and conversion process that enabled the production of two tricyclic sesquiterpenes, epi-isozizaene and prespatane, from the woody biomass poplar using the versatile basidiomycete Rhodosporidium toruloides. We demonstrated terpene production at both bench and bioreactor scales, with prespatane titers reaching 1173.6 mg/L when grown in poplar hydrolysate in a 2 L bioreactor. Additionally, we examined the theoretical fuel properties of prespatane and epi-isozizaene in their hydrogenated states as blending options for jet fuel, and compared them to aviation fuel, Jet A. Our findings indicate that prespatane and epi-isozizaene in their hydrogenated states would be attractive blending options in Jet A or other lower density renewable jet fuels as they would improve viscosity and increase their energy density. Saturated epi-isozizaene and saturated prespatane have energy densities that are 16.6 and 18.8% higher than Jet A, respectively. These results highlight the potential of R. toruloides as a production host for the sustainable and scalable production of bio-derived jet fuel blends, and this is the first report of prespatane as an alternative jet fuel.

09 BIOMASS FUELS↗

DOE OSTI2020

Production of ent-kaurene from lignocellulosic hydrolysate in Rhodosporidium toruloides

Abstract Background Rhodosporidium toruloides has emerged as a promising host for the production of bioproducts from lignocellulose, in part due to its ability to grow on lignocellulosic feedstocks, tolerate growth inhibitors, and co-utilize sugars and lignin-derived monomers. Ent -kaurene derivatives have a diverse range of potential applications from therapeutics to novel resin-based materials. Results The Design, Build, Test, and Learn (DBTL) approach was employed to engineer production of the non-native diterpene ent -kaurene in R. toruloides . Following expression of kaurene synthase (KS) in R. toruloides in the first DBTL cycle, a key limitation appeared to be the availability of the diterpene precursor, geranylgeranyl diphosphate (GGPP). Further DBTL cycles were carried out to select an optimal GGPP synthase and to balance its expression with KS, requiring two of the strongest promoters in R. toruloides , ANT (adenine nucleotide translocase) and TEF1 (translational elongation factor 1) to drive expression of the KS from Gibberella fujikuroi and a mutant version of an FPP synthase from Gallus gallus that produces GGPP. Scale-up of cultivation in a 2 L bioreactor using a corn stover hydrolysate resulted in an ent -kaurene titer of 1.4 g/L. Conclusion This study builds upon previous work demonstrating the potential of R. toruloides as a robust and versatile host for the production of both mono- and sesquiterpenes, and is the first demonstration of the production of a non-native diterpene in this organism.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

Exploiting nonionic surfactants to enhance fatty alcohol production in Rhodosporidium toruloides

Fatty alcohols (FOHs) are important feedstocks in the chemical industry to produce detergents, cosmetics, and lubricants. Microbial production of FOHs has become an attractive alternative to production in plants and animals due to growing energy demands and environmental concerns. However, inhibition of cell growth caused by intracellular FOH accumulation is one major issue that limits FOH titers in microbial hosts. In addition, identification of FOH-specific exporters remains a challenge and previous studies towards this end are limited. To alleviate the toxicity issue, we exploited nonionic surfactants to promote the export of FOHs in Rhodosporidium toruloides, an oleaginous yeast that is considered an attractive next-generation host for the production of fatty acid-derived chemicals. Our results showed FOH export efficiency was dramatically improved and the growth inhibition was alleviated in the presence of small amounts of tergitol and other surfactants. As a result, FOH titers increase by 4.3-fold at bench scale to 352.6 mg/L. With further process optimization in a 2-L bioreactor, the titer was further increased to 1.6 g/L. The method we show here can potentially be applied to other microbial hosts and may facilitate the commercialization of microbial FOH production.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

Bioprocessing Separations Consortium: Three-Year Overview - Technical Advances, Process Economics Influence, and State of the Science

The Bioprocessing Separations Consortium solves separations challenges that are unique to bioprocessing. To do this, the Consortium uses two methods: applying existing technologies to new challenges and developing new technologies that may address these unique challenges better than today’s commercial technologies. In its research and development, the Consortium leverages its three core capabilities: materials development and evaluation, process development, and analysis and computation. In its first three years, from 2016 to 2019, the Consortium addressed four critical challenges in biochemical and thermochemical processing. First, the Consortium targeted the fractionation of lignin to enable valorization of this portion of biomass that offers diverse, complex, and valuable building blocks and products. Second, Consortium researchers developed technologies to enable process intensification, which can reduce equipment needs, energy consumption, and waste generation, thereby cutting bioprocessing capital costs and rendering processes more efficient. Third, the Consortium sought to recover carbon from dilute aqueous streams that are common to bioprocessing; recovering dilute carbon can improve process efficiency and economics. Finally, Consortium researchers designed and developed new materials and catalysts to reduce targeted foulants and poisons in bioprocessing streams that can limit the lifetime of downstream catalysts or fermenting microorganisms. Table 1 lists the technologies that were examined and places them in the context of the Consortium’s capabilities, types of bioprocesses, and critical challenges in bioprocessing separations. Overall, across these projects, we have developed separations technologies for 10 bioprocesses, addressed 9 target compounds in bioprocessing, developed 10 materials, and evaluated 4 processes for cost and sustainability.

09 BIOMASS FUELS↗

DOE OSTI2019

Approaches for More Efficient Biological Conversion of Lignocellulosic Feedstocks to Biofuels and Bioproducts

The future bioeconomy promises drop-in or performance-advantaged biofuels and bioproducts derived from lignocellulosic biomass, substantial greenhouse gas emissions reductions in sectors with few or no alternatives, and increased domestic energy production in countries with sufficient biomass resources. Despite the slower than anticipated pace of commercializing next-generation biofuels, the research community continues to make dramatic improvements at every stage of production, from feedstock cultivation through conversion to final products. However, the interdisciplinary nature of bioenergy research, and the need for cross-coordination among biologists, chemists, agronomists, and engineers, make coordinating and optimizing these strategies challenging. This Perspective surveys recent advancements in bioenergy crop engineering, lignocellulosic biomass deconstruction and fractionation, catabolism of biomass-derived sugars and aromatics, and biological conversion to fuels and products. Here, we organize major research approaches into broad categories and comment on which strategies offer synergies or trade-offs in the context of four approaches to improving the economics and carbon-efficiency of advanced biofuels and bioproducts: (1) maximize sugar conversion to a single product, (2) utilize diverse carbon sources for producing a single product, (3) convert lignin to high-value products, and (4) fractionate the hydrolysate to derive maximum value from each component.

09 BIOMASS FUELS↗