Search NASA⌕ Search

Engineering topics

Susca, Sara

Publications and source records attributed to Susca, Sara.

14 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Designing a Decontamination Solution for the Low-Earth-Orbit, Cryogenic SPHEREx Mission

To address the scientific goals of NASA’s astrophysics division, the JPL and Caltech’s SPHEREx mission conducts the first near-infrared all-sky spectral survey in low-earth-orbit using a passively-cooled, cryogenic telescope. Several unique water contamination issues arise due to the combination of cryogenic operation temperatures and the limited temperature control authority of passive cooling. Because water molecules have adsorption bands within the wavelengths of interest for SPHEREx’s survey, it is imperative that water contamination be controlled and minimized. In this work, a model is developed for the SPHEREx mission to predict the transport and accumulation of outgassed water onto sensitive payload components. The model utilizes the time dependent thermal profiles of the individual payload components, initial water content, and spacecraft geometry to calculate the time dependent water diffusion, transport, and adsorption. This model is subsequently used to predict water contamination risks and design decontamination solutions for each risk. Two major water contamination risks were predicted, water accumulation during cooldown and on cryogenic surfaces during the mission. The first risk occurs during the cooldown of the payload to cryogenic temperatures, predicting water accumulation on optical surfaces in excess of the allowable levels. To mitigate this accumulation, the temperature of the optical surfaces is controlled during cooldown through a combination of heaters and spacecraft pointing. The second risk is that over the course of the mission, is unavoidable water accumulation onto the payload thermal system’s cryogenic surfaces, possibly jeopardizing thermal performance and temperature stability, both of which are required for science success. To decontaminate any water that had collected onto cryogenic thermal system surfaces, a decontamination maneuver was designed. In this decontamination maneuver, cryogenic surfaces of the thermal system are warmed to a temperature where water will desorb by spacecraft pointing while still meeting all avoidance constraints, and thereby avoiding undue risk to the observatory hardware. Through application of the developed analytical model and inclusion of the decontamination maneuver in the mission design, SPHEREx can confidently demonstrate that it is able to decontaminate, at the start of and during the mission as needed to meet its end of life science performance requirements.

Soares, Carolos E.↗
NASA NTRS2018

Project-domain Science Traceability and Alignment Framework (P-STAF): Analysis of a Payload Architecture

Large science-focused space missions often have multiple instruments working together to address broad science goals. Systems engineers on these types of projects must work with the project scientists to evaluate trades and make decisions that result in a system that efficiently serves the mission science goals. This collaboration is more effective if the systems engineers understand both the traceability from the L1 customer requirements to the selected instruments and the contributions of each instrument in the context of the whole payload suite. These relationships might be understood implicitly by the science team on a project, but there is value in formally codifying them so this understanding can be accessed and formally analyzed by a broader systems engineering effort. We first described a framework for this communication, called the Project-domain Science Traceability and Alignment Framework (P-STAF), in the IEEE 2017 paper “A Framework for Extending the Science Traceability Matrix: Application to the Planned Europa Mission.” This paper shows how that basic framework can be leveraged to not only formally capture these relationships between the instruments and the customer needs, but also how that information can be codified in an analyzable graph that can be queried to provide a better understanding of mission risks and scope. This work was drawn from the application of P-STAF to the Europa Clipper mission, but generic example networks are used to illustrate the power of this technique.

Reinholtz, Kirk↗
NASA NTRS2017

A Framework for Extending the Science Traceability Matrix: Application to the Planned Europa Mission

One of the most critical functions of the systems engineering requirements process for a large multi-instrument science-driven space mission is to successfully communicate customer expectations into a comprehensive and traceable science requirements flowdown. These requirements are essential to communicating the constraints on the scope of the science investigations and clarifying how multiple instruments contribute to a given science goal. They also provide insight into how the science goals of the whole mission are affected by design choices. There is little specific guidance available on best practices for developing this science-driven flowdown. A unified Science Traceability Matrix (USTM) contains a significant amount of information that can be leveraged for that purpose, but the USTM was not designed to directly produce a complete science requirements flowdown. Thus, starting with the principles codified in a USTM, the authors propose a framework that directly maps into the requirements flowdown and supports broader systems engineering processes while retaining its meaning to the science team. This Science Traceability and Alignment Framework, or STAF, defines a set of common definitions and valid relationships to structure communication across the project. In addition, STAF populates a network of information that can be useful to support complex mission analysis activities such as fault protection. This work discusses the highest-level implementation of the STAF, the project-domain or P-STAF, which describes an approach to decomposing customer requirements into science requirements. The planned Europa Mission is used as a case study for the implementation of this framework and its potential benefits to a project.

Susca, Sara↗
NASA NTRS2017

A Framework for Writing Science Measurement Requirements and its Application to the Europa Multiple Flyby Mission

Science-engineering communication is critical to the success of any science-driven mission. The process of building this understanding relies on a shared language for communicating science needs and engineering results, which can be particularly difficult on large space-science missions where many different institutions contribute to the science team. The Science Traceability Matrix can be used to formalize this communication pathway, but it has limited use in the development of the science requirements flow down, and vary in format, scope and content from mission to mission. There are many guidelines on developing well-constructed requirements in general, but very little is published on how to actually write these science-driven requirements in a systematic way. This paper discusses the measurement-domain science traceability and alignment framework, or M-STAF, which was developed to help frame the conversation between scientists and engineers in the development of science measurement requirements. The MSTAF provides a common language that can be used to ensure consistency across instruments, completeness in the coverage of the requirements, and traceability of the engineering work to the science objectives of the project. This work discusses the framework in the context of other communication tools, how it can be implemented on a flight project, and provides examples of how it might be used to improve the measurement requirements set for a project. The general framework is presented through the lens of its potential application on the planned Europa Mission.

Oaida, Bogdan V.↗
NASA NTRS2017

A sub-arcsecond Pointing stability fine stage for a high altitude balloon platform

High-altitude balloons (HABs) are platforms for collecting astrophysical and planetary science data that offer a number of advantages compared to conventional groundbased or space-based systems. However, they also pose a set of new environmental challenges that must be addressed in order to offer a viable alternative to ground- or space- based assets. In particular, maintaining science-quality pointing stability is a critical challenge for HAB platforms. For these missions, dynamic errors must be limited to a fraction of the observation wavelength, so as the wavelength becomes smaller, it becomes more difficult to meet the needed performance. As a result, there are very few existing pointing stabilization solutions that use visible-spectrum guide stars, despite their relatively wide distribution across the sky. This paper describes the results achieved with the STABLE (Subarcsecond Telescope And BaLloon Experiment) project whose goal is to provide the fine pointing stage for a balloonborne platform observing in the visible wavelength.

Porter, Michael↗
NASA NTRS2016

Use of Model Payload for Europa Mission Development

This paper discusses the basis for the Model Payload and how it was used to develop the mission design, observation and data acquisition strategy, needed spacecraft capabilities, spacecraft-payload interface needs, mission system requirements and operational scenarios.

Lewis, Kari↗
NASA NTRS2012

Fully Self-Contained Vision-Aided Navigation and Landing of a Micro Air Vehicle Independent from External Sensor Inputs

Direct-lift micro air vehicles have important applications in reconnaissance. In order to conduct persistent surveillance in urban environments, it is essential that these systems can perform autonomous landing maneuvers on elevated surfaces that provide high vantage points without the help of any external sensor and with a fully contained on-board software solution. In this paper, we present a micro air vehicle that uses vision feedback from a single down looking camera to navigate autonomously and detect an elevated landing platform as a surrogate for a roof top. Our method requires no special preparation (labels or markers) of the landing location. Rather, leveraging the planar character of urban structure, the landing platform detection system uses a planar homography decomposition to detect landing targets and produce approach waypoints for autonomous landing. The vehicle control algorithm uses a Kalman filter based approach for pose estimation to fuse visual SLAM (PTAM) position estimates with IMU data to correct for high latency SLAM inputs and to increase the position estimate update rate in order to improve control stability. Scale recovery is achieved using inputs from a sonar altimeter. In experimental runs, we demonstrate a real-time implementation running on-board a micro aerial vehicle that is fully self-contained and independent from any external sensor information. With this method, the vehicle is able to search autonomously for a landing location and perform precision landing maneuvers on the detected targets.

autonomous landing↗