2D Phase Formation on 3D Perovskite: Insights from Molecular Stiffness
Not Available
2D/3D perovskites↗
Engineering topics
Sutter-Fella, Carolin M.
Publications and source records attributed to Sutter-Fella, Carolin M..
Synthesis and growth of solution-processed chiral perovskites
In materials science, chiral perovskites stand out due to their exceptional optoelectronic properties and the versatility in their structure and composition, positioning them as crucial in the advances of technologies in spintronics and chiroptical systems. This review underlines the critical role of synthesizing and growing these materials, a process integral to leveraging their complex interplay between structural chirality and distinctive optoelectronic properties, including chiral-induced spin selectivity and chiroptical activity. The paper offers a comprehensive summary and discussion of the methods used in the synthesis and growth of chiral perovskites, delving into extensive growth techniques, fundamental mechanisms, and strategic approaches for the engineering of low-dimensional perovskites, alongside the creation of novel chiral ligands. The necessity of developing new synthetic approaches and maintaining precise control during the growth of chiral perovskites is emphasized, aiming to enhance their structural chirality and boost their efficiency in spin and chiroptical selectivity.
36 MATERIALS SCIENCE↗
Two-dimensional perovskite templates for durable, efficient formamidinium perovskite solar cells
We present a design strategy for fabricating ultrastable phase-pure films of formamidinium lead iodide (FAPbI 3 ) by lattice templating using specific two-dimensional (2D) perovskites with FA as the cage cation. When a pure FAPbI 3 precursor solution is brought in contact with the 2D perovskite, the black phase forms preferentially at 100°C, much lower than the standard FAPbI 3 annealing temperature of 150°C. X-ray diffraction and optical spectroscopy suggest that the resulting FAPbI 3 film compresses slightly to acquire the (011) interplanar distances of the 2D perovskite seed. The 2D-templated bulk FAPbI 3 films exhibited an efficiency of 24.1% in a p-i-n architecture with 0.5–square centimeter active area and an exceptional durability, retaining 97% of their initial efficiency after 1000 hours under 85°C and maximum power point tracking.
14 SOLAR ENERGY↗
Anion and Cation Migration at 2D/3D Halide Perovskite Interfaces
Here, this study explores the ionic dynamics in 2D/3Dperovskite solar cells, which are known for their improved efficiency and stability. The focus is on the impact of halide choice in 3D perovskites treated with phenethylammonium halide salts (PEAX, X = Br and I). Our findings reveal that light and heat drive ionic migration in these structures, with PEA + species diffusing into the 3D film in PEABr-treated samples. Mixed-halide 3D perovskites show halide interdiffusion, with bromine migrating to the surface and iodine diffusing into the film. Cathodoluminescence microscopy reveals localized 2Dphases on the 3D perovskite, which become more evenly distributed after thermal treatment. Both PEAX salts enhance the performance of photovoltaic devices. This improvement is attributed to the passivation capabilities of the salts themselves and their respective Ruddlesden–Popper (RP) phases. Annealed PEAI-treated devices show a better balance between efficiency and statistical distribution of photovoltaic parameters.
25 ENERGY STORAGE↗
Text Mining the Literature to Inform Experiments and Rationalize Impurity Phase Formation for BiFeO 3
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Effect of the Precursor Chemistry on the Crystallization of Triple Cation Mixed Halide Perovskites
Triple cation, mixed halide perovskite compositions have been reported to be more thermally stable, exhibit fewer phase impurities, and show higher power conversion efficiency and better reproducibility than single cation perovskites. In this work, we explain the formation of Cs0.05FA0.81MA0.14Pb(I0.85Br0.15)3 via a multimodal in situ study combining structural information from synchrotron grazing-incidence wide-angle X-ray scattering (GIWAXS) and optical properties from photoluminescence (PL) spectroscopy with density functional theory calculations (DFT). The focus here is on the effects of the solvent and antisolvent during crystallization. The predominantly used solvents N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), and the antisolvent chlorobenzene (CB) as well as the solvent-antisolvent-precursor interactions are investigated. Given the high elemental complexity and mutual interdependencies between solvent, antisolvent, and perovskite precursors, we found significant differences in the crystallization pathways. DMF-pure precursors show the formation of the DMF-containing intermediate phase and the nucleation of compositionally distinct perovskite phases, while when DMSO is added, only crystalline α- and δ-phases were found. In addition, the presence of DMSO helps the formation of α-perovskite. Coordination energy and bond order (BO) calculations support our experimental findings. Dripping of CB induces nucleation at room temperature, slows the α-phase formation rate, and appears to reduce the nucleation radius. These findings provide novel insights into solvent, antisolvent, and perovskite precursor interactions and their formation pathways. The complexity of interactions between solvents and reagents highlights the importance of understanding these effects to further improve the reproducibility and optimize processing conditions.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Oriented nucleation in formamidinium perovskite for photovoltaics
The black phase of formamidinium lead iodide (FAPbI 3 ) perovskite shows huge promise as an efficient photovoltaic, but it is not favoured energetically at room temperature, meaning that the undesirable yellow phases are always present alongside it during crystallization. This problem has made it difficult to formulate the fast crystallization process of perovskite and develop guidelines governing the formation of black-phase FAPbI 3 . Here, we use in situ monitoring of the perovskite crystallization process to report an oriented nucleation mechanism that can help to avoid the presence of undesirable phases and improve the performance of photovoltaic devices in different film-processing scenarios. The resulting device has a demonstrated power-conversion efficiency of 25.4% (certified 25.0%) and the module, which has an area of 27.83 cm 2 , has achieved an impressive certified aperture efficiency of 21.4%.
14 SOLAR ENERGY↗
Chlorine retention enables the indoor light harvesting of triple halide wide bandgap perovskites
Chlorine incorporation in triple halide perovskites reduces trap density and enhances the efficiency of indoor light harvesting.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
19.31% binary organic solar cell and low non-radiative recombination enabled by non-monotonic intermediate state transition
Non-fullerene acceptors based organic solar cells represent the frontier of the field, owing to both the materials and morphology manipulation innovations. Non-radiative recombination loss suppression and performance boosting are in the center of organic solar cell research. Here, we developed a non-monotonic intermediate state manipulation strategy for state-of-the-art organic solar cells by employing 1,3,5-trichlorobenzene as crystallization regulator, which optimizes the film crystallization process, regulates the self-organization of bulk-heterojunction in a non-monotonic manner, i.e., first enhancing and then relaxing the molecular aggregation. As a result, the excessive aggregation of non-fullerene acceptors is avoided and we have achieved efficient organic solar cells with reduced non-radiative recombination loss. In PM6:BTP-eC9 organic solar cell, our strategy successfully offers a record binary organic solar cell efficiency of 19.31% (18.93% certified) with very low non-radiative recombination loss of 0.190 eV. And lower non-radiative recombination loss of 0.168 eV is further achieved in PM1:BTP-eC9 organic solar cell (19.10% efficiency), giving great promise to future organic solar cell research.
14 SOLAR ENERGY↗
Vapor-Deposited n = 2 Ruddlesden–Popper Interface Layers Aid Charge Carrier Extraction in Perovskite Solar Cells
Interfacial passivation with bulky organic cations such as phenetylammonium iodide has enabled high performance for metal halide perovskite optoelectronic devices. However, the homogeneity of these interfaces and their formation dynamics are poorly understood. Here we study how Ruddlesden-Popper 2D phases form at a 3D perovskite interface when the 2D precursors are introduced via solution or via vapor. When using vapor deposition, we observe uniform coverage of the capping layer and the formation of a predominantly n = 2 Ruddlesden-Popper phase. In contrast, when using solution deposition, we observe the presence of a mixture of n = 2 and n = 1 in the film and the formation of aggregates of the organic cations. As a result of the better phase purity and uniformity, vapor deposition enables higher median solar cell performance with narrower distribution compared to solution-treated films. This study provides fundamental information that the perovskite community can use to better design capping layers to achieve higher charge extraction efficiencies.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Impact of processing conditions on the film formation of lead-free halide double perovskite Cs 2 AgBiBr 6
Lead-free halide double perovskites with enhanced stability have gained attention as a promising environmentally friendly alternative to lead-based halide perovskites. Amongst different halide double perovskites, Cs 2 AgBiBr 6 has shown attractive optoelectronic properties and stability, making it a promising candidate for stable high-efficiency optoelectronic devices. Motivated by a data mining effort, we present here in this study the effects of different processing strategies on the microstructure and thin-film formation dynamics of Cs 2 AgBiBr 6 . We apply some of the most successfully used solvent engineering approaches from the halide perovskite research to halide double perovskites, namely antisolvent- and additive-assisted synthesis. Using in situ spectroscopy and diffraction, the film formation of Cs 2 AgBiBr 6 is investigated during spin coating, and the subsequent post-deposition thermal annealing. Dropping antisolvents during spin coating induces immediate supersaturation and crystallization of the wet film, whereas the time of dropping the antisolvent has implications on the film formation dynamics and the final microstructure. For additive (HBr)-assisted synthesis, we show how the addition of HBr affects colloid formation in solution and thus influences the crystallization pathway during thin-film processing. Finally, HBr additive simplifies synthesis in that it doesn't require solution and substrate preheating to obtain pinhole-free films even with higher thickness.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Performance-limiting formation dynamics in mixed-halide perovskites
Wide-bandgap (WBG) mixed-halide perovskites as the front cell absorber are accomplishing perovskite-based tandem solar cells with over 29% power conversion efficiency. However, their large voltage deficits limit their ultimate performance. Only a handful of studies probe the fundamental mechanisms underlying the voltage deficits, which remain an unsolved challenge in the field. In this study, we investigate the formation dynamics and defect physics of WBG mixed-halide perovskites in contrast with their corresponding triiodide-based perovskites. Our results show that the inclusion of bromide introduced a halide homogenization process that occurs during the perovskite growth stage from an initial bromide-rich phase toward the final target stoichiometry. We further elucidated a physical model that correlates the role of bromide with the formation dynamics, defect physics, and eventual optoelectronic properties of the film. This work provides a fundamental and unique perspective toward understanding the performance-limiting factors affecting WBG mixed-halide perovskites.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Strong Fermi-level pinning at metal contacts to halide perovskites
The performance of halide perovskite-based electronic and optoelectronic devices is often related to interfacial charge transport. To shed light on the underlying physical and chemical properties of CH 3 NH 3 PbI 3 (MAPbI 3 ) in direct contact with common electrodes Al, Ti, Cr, Ag, and Au, the evolution of interfacial properties and Fermi level pinning is systematically studied. Given a unique experimental facility, pristine interfaces without any exposure to ambient air were prepared. We observe aggregation of substantial amounts of metallic lead (Pb 0 ) at the metal/MAPbI 3 interface, resulting from the interfacial reaction between the deposited metal and iodine ions from MAPbI 3 . It is found that the Schottky barrier height at the metal/MAPbI 3 interface is independent of the metal work function due to strong Fermi level pinning, possibly due to the metallic Pb 0 aggregates, which act as interfacial trap sites. The charge neutrality level of MAPbI 3 is consistent with the energy level of Pb 0 -related defects, indicating that Pb 0 interfacial trap states can be nonradiative recombination sites. Here this work underlines that control of chemical bonding at interfaces is a key factor for designing future halide perovskite-based devices.
36 MATERIALS SCIENCE↗
Out-of-equilibrium processes in crystallization of organic-inorganic perovskites during spin coating
Complex phenomena are prevalent during the formation of materials, which affect their processing-structure-function relationships. Thin films of methylammonium lead iodide (CH 3 NH 3 PbI 3 , MAPI) are processed by spin coating, antisolvent drop, and annealing of colloidal precursors. The structure and properties of transient and stable phases formed during the process are reported, and the mechanistic insights of the underlying transitions are revealed by combining in situ data from grazing-incidence wide-angle X-ray scattering and photoluminescence spectroscopy. Here, we report the detailed insights on the embryonic stages of organic-inorganic perovskite formation. The physicochemical evolution during the conversion proceeds in four steps: i) An instant nucleation of polydisperse MAPI nanocrystals on antisolvent drop, ii) the instantaneous partial conversion of metastable nanocrystals into orthorhombic solvent-complex by cluster coalescence, iii) the thermal decomposition (dissolution) of the stable solvent-complex into plumboiodide fragments upon evaporation of solvent from the complex and iv) the formation (recrystallization) of cubic MAPI crystals in thin film.
36 MATERIALS SCIENCE↗