Search NASA⌕ Search

Engineering topics

Sutton, Andrew D.

Publications and source records attributed to Sutton, Andrew D..

35 records · Page 2

Top Ten Blendstocks For Turbocharged Gasoline Engines: Bioblendstocks With Potential to Deliver the for Highest Engine Efficiency

More efficient engines enabled by better fuels derived from biomass could increase the fuel economy of the light duty (LD) fleet by 10% over current technology and planned developments. This report identifies top LD boosted spark ignition (BSI) biofuel candidates for further development and commercialization identified using a fuel property basis. The BSI merit function was used to evaluate the performance of candidate bio-blendstocks in improving engine efficiency. This report is aimed at biofuel researchers looking to better understand the efficiency implications of biofuels under development, as well as engine researchers who are interested in future biofuels with properties that enable more efficient engine design and operation.

09 BIOMASS FUELS↗

Camphorane as a Renewable Diesel Blendstock Produced by Cyclodimerization of Myrcene

Camphorene was synthesized by the thermal Diels–Alder cyclodimerization of myrcene and subsequently hydrogenated to produce camphorane. On the basis of common fuel metrics (density, lower heating value, cetane, and viscosity) the prepared camphorane fuel exhibits appropriate physicochemical properties for its implementation in compression ignition engines. The high viscosity of camphorane necessitates its blending with petroleum diesel, which offers a final fuel within the ASTM specification for diesel. Soot production measurements of camphorane and its blends with diesel demonstrate a potential to significantly reduce soot emissions. The physicochemical and combustion properties of camphorane are further compared to those of other terpene biofuels along with biodiesel.

09 BIOMASS FUELS↗

Top Ten Blendstocks Derived From Biomass For Turbocharged Spark Ignition Engines

More efficient engines enabled by better fuels derived from biomass could increase the fuel economy of the light duty (LD) fleet by 10% over current technology and planned developments. This report identifies top LD boosted spark ignition (BSI) biofuel candidates for further development and commercialization identified using a fuel property basis. The BSI merit function was used to evaluate the performance of candidate bio-blendstocks in improving engine efficiency. This report is aimed at biofuel researchers looking to better understand the efficiency implications of biofuels under development, as well as engine researchers who are interested in future biofuels with properties that enable more efficient engine design and operation.

09 BIOMASS FUELS↗

Surface energy of air fractionated corn stover

Despite decades of research, Integrated Biorefineries (IBRs) are still not commercially viable because of the long-standing, unresolved challenges related to biomass solids handling and transport (e.g., flowability and fouling), and pretreatment e.g., wettability and conversion). The compendium of challenges facing IBRs lead to operational reliability and time-on-stream estimates of 30%, yet economically viable IBRs require greater than 90% operational reliabilities. The performance of commercial solids handling operations is largely dependent on the fundamental thermodynamic property, surface energy. Combining surface area, thermogravimetric, and inverse gas chromatography analyses, we show the observed differences in surface energy (e.g., wettability and work of cohesion) for anatomically air fractionated corn ( Zea mays L.) stover. Furthermore, this study highlights the importance of understanding and tuning biomass surface energy to improve IBR solids handling and transport, and pretreatment operations.

09 BIOMASS FUELS↗

Lutetium functionalities supported by a sterically encumbered β-diketiminate ligand

The sterically encumbered NacNac ligand, [HC(MeCNAr) 2 ] – (Ar = 2,6- i -Pr 2 C 6 H 3 ), was investigated as a platform for supporting Lu-halide complexes, sought for their potential capability of being further converted into hydrocarbyl derivatives via metathetical chemistries with alkali metal alkyls. As a result, these substituted analogs were targeted as potentially viable candidates for alkane elimination chemistries, with an eye towards the formation of an isolable Lu-alkylidene fragment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of fuels and feedstocks

Disclosed herein are embodiments of a method for making fuels and feedstocks from readily available alcohol starting materials. In some embodiments, the method concerns converting alcohols to carbonyl-containing compounds and then condensing such carbonyl-containing compounds together to form oligomerized species. These oligomerized species can then be reduced using by-products from the conversion of the alcohol. In some embodiments, the method further comprises converting saturated, oligomerized, carbonyl-containing compounds to aliphatic fuels.

09 BIOMASS FUELS↗

Crossing the Eddington Limit: Examining Disk Spectra at High Accretion Rates

The faintest ultraluminous X-ray sources (ULXs), those with 0.3–10 keV luminosities 1<L{sub X}/10{sup 39}<3 erg s{sup −1}, tend to have X-ray spectra that are disk-like but broader than expected for thin accretion disks. These “broadened disk (BD)” spectra are thought to indicate near- or mildly super-Eddington accretion onto stellar remnant black holes. Here we report that a sample of bright thermal-dominant black hole binaries, which have Eddington ratios constrained to moderate values, also show BD spectra in the 0.3–10 keV band at an order of magnitude lower luminosities. This broadening would be missed in studies that only look above ∼2 keV. While this may suggest that BD ULXs could be powered by accretion onto massive stellar remnant black holes with close to maximal spin, we argue in favor of a scenario where they are at close to the Eddington luminosity, such that radiation pressure would be expected to result in geometrically slim, advective accretion disks. However, this implies that an additional physical mechanism is required to produce the observed broad spectra at low Eddington ratios.

79 ASTRONOMY AND ASTROPHYSICS↗

Reversible Formation of a Cerium-Bound Terminal Hydride: Ce(C 5 Me 4 SiMe 3 ) 2 (H)(thf)

The use of the bulky cyclopentadienyl ligand Cp' (Cp' = C 5 Me 4 SiMe 3 ) to stabilize cerium hydrides has resulted here in the preparation of two novel tuck-in complexes with C–H activated SiMe 3 groups. Subsequent reaction of these with H 2 in thf gives a lanthanide terminal hydride species Ce(Cp') 2 (H)(thf) which reversibly regenerates the tuck-in complex under sustained vacuum. This compound is only the second structurally characterized terminal cerium hydride. This new hydride is a catalyst in H/D exchange reactions between with both sp 3 -CH and sp 2 -CH bonds, and for the hydrogenation of unsaturated alkene bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Conversion of Starch and Sugars into Branched C 10 and C 11 Hydrocarbons

Oligosaccharides, such as starch, cellulose, and hemicelluloses, are abundant and easily obtainable bio-derived materials that can potentially be used as precursors for fuels and chemical feedstocks. To access the pertinent molecular building blocks (i.e., 5- or 6-carbon containing sugar units) located within these biopolymers and transform them into useful fuel precursors, oligosaccharide depolymerization followed by chain extension is required. This chain extension can readily be performed via a Garcia–Gonzalez-like approach using β-diketones under mild conditions to provide fuel precursors containing an increased carbon atom content that meets fuel requirements. In a subsequent step, ring opening and hydrodeoxygenation chemistry of these species allows for the preparation of branched alkanes under relatively mild conditions. Finally, this approach can be applied to monomeric sugars (glucose and xylose), oligosaccharides (starch), and potentially to hydrolyzed dedicated energy crops to allow the conversion of real biomass into fuel type molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chapter 8: Pyrolysis of Biomass for Aviation Fuel

Pyrolysis, the breaking down of organic material using heat and the absence of oxygen, is a method that has been widely researched for the production of liquid fuels. In this chapter, we review the feedstocks typically used for pyrolysis, the properties and the composition of the liquid fraction (termed 'bio-oil') obtained, the studies in which pyrolysis has been used in an attempt to increase the bio-oil yield, and how the bio-oil has been upgraded to fuel-like molecules. We also discuss the viability of pyrolysis to produce jet fuel hydrocarbons.

09 BIOMASS FUELS↗

The Effect of Functional Groups in Bio-Derived Fuel Candidates

Interest in developing renewable fuels is continuing to grow and biomass represents a viable source of renewable carbon with which to replace fossil-based components in transportation fuels. During our own work, we noticed that chemists think in terms of functional groups whereas fuel engineers think in terms of physical fuel properties. In this Concept article, we discuss the effect of carbon and oxygen functional groups on potential fuel properties. This serves as a way of informing our own thinking and provides us with a basis with which to design and synthesize molecules from biomass that could provide useful transportation fuels.

09 BIOMASS FUELS↗

Synthesis and reactivity of cis-FeH 2 (dcpe) 2 (dcpe=1,2-bis(dicyclohexylphosphino)ethane)

For this work, a new six-coordinate iron dihydride cis-FeH2(dcpe)2 (1) has been synthesized (dcpe = 1,2-bis(dicyclohexylphosphino)ethane). It has been found to react with either 1,4-cyclohexadiene or tert-butylethylene in toluene to give the respected hydrogenated hydrocarbon and the zero valent species Fe(dcpe)(toluene) (2). When this reaction with acceptor olefins was performed in methylcyclohexane, transfer dehydrogenation was observed to give low-yields of iron-bound toluene in 2.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reduction of CO 2 to methanol using aluminum ester FLPs

Herein we report the synthesis of Al-based esters containing halogenated benzene rings. These Lewis acids were paired with phosphines to form frustrated Lewis pairs (FLPs) which could subsequently bind CO 2 . While these FLPs were not sufficiently water-stable to catalyze the reduction of CO 2 to MeOH using NH 3 BH 3 as the reductant, we examine the effect of varying Lewis acid strength. Frustrated Lewis pairs (FLPs) are combinations of Lewis acids and Lewis bases where the acid and base are either sterically or geometrically restricted from interacting as strongly as their electronic structures would allow. This effect leads to enhanced reactivity towards small molecules and, consequently, interest in their potential as metal-free catalysts [1], [2], [3], [4] and [5]. Furthermore, to-date, the biggest success has been based around the ability of a myriad of systems to heterolytically cleave H 2 and perform catalytic hydrogenations [2] and [3].

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation and Hydration of U 3 O 8 Materials Following Controlled Exposure to Temperature and Humidity

Chemical signatures correlated with uranium oxide processing are of interest to forensic science for inferring sample provenance. Identification of temporal changes in chemical structures of process uranium materials as a function of controlled temperatures and relative humidities may provide additional information regarding sample history. In our study, a high-purity α-U 3 O 8 sample and three other uranium oxide samples synthesized from reaction routes used in nuclear conversion processes were stored under controlled conditions over 2–3.5 years, and powder X-ray diffraction analysis and X-ray absorption spectroscopy were employed to characterize chemical speciation. We measured signatures from the α-U 3 O 8 sample indicated that the material oxidized and hydrated after storage under high humidity conditions over time. Impurities, such as uranyl fluoride or schoepites, were initially detectable in the other uranium oxide samples. After storage under controlled conditions, the analyses of the samples revealed oxidation over time, although the signature of the uranyl fluoride impurity diminished. The presence of schoepite phases in older uranium oxide material is likely indicative of storage under high humidity and should be taken into account for assessing sample history. Finally, the absence of a signature from a chemical impurity, such as uranyl fluoride hydrate, in an older material may not preclude its presence at the initial time of production.

36 MATERIALS SCIENCE↗