Engineering topics
Publications and source records attributed to Sutton, G..
A three-axis short-period seismometer is now operating on Mars in the Utopia Planitia region. The noise background correlates well with wind gusts. Although no quakes have been detected in the first 60 days of observation, it is premature to draw any conclusions about the seismicity of Mars. The instrument is expected to return data for at least 2 years.
Review of the major discoveries that have resulted to date from the analysis of seismic data from a network of geophysical stations on the moon. It is found that lunar seismic signals differ greatly from typical terrestrial seismic signals; the moon possesses a crust and a mantle, at least in the region of the Apollo 12 and 14 stations; natural lunar events detected by the Apollo seismic network are moonquakes and meteoroid impacts; and in addition to the repeating moonquakes, moonquake 'swarms' have been discovered.
Explore the source record for details and available documents.
Lunar seismic data from artificial impacts recorded at three Apollo seismometers are interpreted to determine the structure of the moon's interior to a depth of about 100 kilometers. In the Fra Mauro region of Oceanus Procellarum, the moon has a layered crust 65 kilometers thick. The seismic velocities in the upper 25 kilometers are consistent with those in lunar basalts. Between 25 and 65 kilometers., the nearly constant velocity (6.8 kilometers per second) corresponds to velocities in gabbroic and anorthositic rocks. The apparent velocity is high (about 9 kilometers per second) in the lunar mantle immediately below the crust.
A lightweight three-component short period seismometer has been developed for preliminary seismic investigations of Mars. Because of weight and data-rate constraints the Viking seismic experiment is far from optimal but it should, at a minimum, provide information about the microseismic level and an upper bound on the seismicity of the planet. If Mars is tectonically active a start can be made on the problem of the internal structure, dynamics, and composition of the planet. A good distribution of modest sized Marsquakes will make it possible to determine if Mars has a core. The size of the core is related to the conditions of planetary formation.
The establishment of a network of seismic stations on the lunar surface as a result of equipment installed by Apollo 12, 14, and 15 flights is described. Four major discoveries obtained by analyzing seismic data from the network are discussed. The use of the system to detect vibrations of the lunar surface and the use of the data to determine the internal structure, physical state, and tectonic activity of the moon are examined.
The design, deployment, and operation of the Apollo 16 passive seismic experiment (PSE) are discussed. Since activation, all elements of the PSE have operated as planned, with the exception of the sensor thermal control system. Significant progress in the measurement of meteoroid flux in near-earth space has been made, along with dilineation of active moonquake source regions. The data obtained indicate that moonquakes are concentrated at great depth (800 to 1000 km) and that the apparent disparity between meteoroid flux estimtes based on lunar crater counts and those from earth-based observations can be resolved by seismic measurements in favor of the lower flux indicated by the crater count method. The results obtained from the PSE are summarized and their significance is discussed in detail.
The natural seismicity of the moon appears to be very low relative to that of the earth. However, moonquakes do occur. They are detected by the stations of the Apollo seismic network at an average rate of 1800/yr at Station 14 and at lower rates at Stations 12 and 15. All of the moonquakes are small, and in the few cases for which the foci have been located, they occur at great depth (about 800 km). The frequency of occurrence of moonquakes is strongly correlated with lunar tides. The dynamic processes that generate quakes are clearly much less vigorous within the moon than they are within the earth.
Lunar seismic data from three Apollo seismometers are interpreted to determine the structure of the moon's interior to a depth of about 100 km. The travel times and amplitudes of P and S arrivals from Saturn IV-B and LM impacts are interpreted in terms of a velocity profile. The most outstanding feature of the model is that, in the Fra Mauro region of Oceanus Procellarum, the moon has a 65 km-thick layered crust. Other features of the model are: (1) rapid increase of velocity near the surface due to pressure effects on dry rocks, (2) a discontinuity at a depth of about 25 km, (3) near-constant velocities between 25 and 65 km deep, (4) a major discontinuity at 65 km marking the base of the lunar crust, and (5) very high apparent velocities (about 9 km/sec for P waves) in the lunar mantle below the crust.
Although the average rate of seismic energy release within the moon appears to be far below that of the earth, over 100 events believed to be moonquakes have been recorded by the two seismic stations installed on the lunar surface during Apollo missions 12 and 14. With few exceptions, the moonquakes occur at monthly intervals near times of perigee and apogee and show correlations with the longer-term (7-month) lunar gravity variations. The repeating moonquakes are believed to occur at not less than 10 different locations. However, a single focal zone accounts for 80 per cent of the total seismic energy detected. This active zone appears to be 600 kilometers south-southwest of the Apollo 12 and 14 sites and deep within the moon. Each focal zone must be small (less than 10 kilometers in linear dimension) and fixed in location over a 14-month period. Cumulative strain at each location is inferred. Thus, the moonquakes appear to be releasing internal strain of unknown origin, the release being triggered by tidal stresses.
Seismic signal analysis from Apollo 14 passive seismic experiment
The objective of the passive seismic experiment is to measure vibrations of the lunar surface produced by all natural and artificial sources of seismic energy and to use these data to deduce the internal structure and constitution of the moon and the nature of tectonic processes which may be active within the moon. Lunar seismic signals are discussed together with the sources of these signals, and aspects of lunar structure and dynamics. Seismic signals from approximately 250 natural events and from two man-made impacts have been recorded during seven months of operation of the two seismic stations installed during Apollo missions 11 and 12.
Long seismic reverberations from man-made impacts on moon, using Apollo 12 lunar surface station recordings
Apollo 11 passive seismic experiment package, discussing design, performance and various received signals
Apollo 11 passive seismic experiment design and objectives, describing seismometer characteristics and lunar interior
Four-component, three-axis, feedback-controlled seismograph incorporates electronic circuitry for leveling and for monitoring the feedback signal required for servo-centering. Viscous damping of the earth-motion signal, compensation of the residual long-term drift, and centering of the seismometers are provided by automatic mechanisms.