Search NASA⌕ Search

Engineering topics

Sutton, M

Publications and source records attributed to Sutton, M.

22 records · Page 2

X-ray diffraction imaging of strain fields in a domain-inverted LiTa0{sub 3} crystal.

We investigate lattice orientation and strain fields across ferroelectric domain walls in a single crystal lithium tantalate using x-ray diffraction imaging (topography). The sample is an actual voltage-operated optical switch consisting of a series of triangular polarization-inverted domains formed in an originally poled single crystal. By applying an electric field only about 2% of the coercive field in the forward and reverse directions, we observed asymmetric lattice rotation of about 10{sup -6} rad, and normal strain variation in the order of 10{sup -5} with reference to the zero-field state. Our results confirm that in congruent LiTaO{sub 3} crystals there is unexpectedly large strain field expanding several micrometers across the domain walls, in contrast with the widely accepted theoretical fact that in this material the polarization reversal establishes over only a few lattice constants, resulting in small and localized lattice distortions.

36 MATERIALS SCIENCE↗

Plutonium Decontamination Using CBI Decon Gel 1101 in Highly Contaminated and Unique Areas at LLNL

A highly contaminated glove-box at LLNL containing plutonium was decontaminated using a strippable decontamination gel. 6 x 12 inch quadrants were mapped out on each of the surfaces. The gel was applied to various surfaces inside the glove-box and was allowed to cure. The radioactivity in each quadrant was measured using a LLNL Blue Alpha meter with a 1.5 inch standoff distance. The results showed decontamination factors of 130 and 210 on cast steel and Lexan{reg_sign} surfaces respectively after several applications. The gel also absorbed more than 91% of the radiation emitted from the surfaces during gel curing. The removed strippable film was analyzed by neutron multiplicity counting and gamma spectroscopy, yielding relative mass information and radioisotopic composition respectively.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Ruthenium nano-oxide layer in CoFe-Ru-CoFe trilayer system: An x-ray reflectivity study

A grazing incidence x-ray reflectivity technique is used to determine the electron density profile as a function of depth in CoFe-Ru-CoFe and CoFe-Ru nano-oxide layer (NOL)-CoFe trilayers. Four trilayers with ruthenium thicknesses of 8, 8.5, and 9 A and one with Ru 8.5 A NOL, prepared by a dc planetary sputtering system, were investigated. For all samples, the electron density profile (EDP) shows a central peak that is related to the Ru layer. Natural oxidation in all of the samples introduces a graded EDP of the top CoFe layers, which decreases gradually to zero. The large surface resistivity of Ru 8.5 A NOL as compared to Ru 8.5 A is related to the remarkable difference between their EDPs. EDP changes have also been investigated in Ru NOL trilayers after annealing at 280 deg. C. The Ru phase in the EDP was observed to confirm the thermal stability of the spacer layer after annealing.

36 MATERIALS SCIENCE↗

Materials Science and X-ray Techniques

Many novel synchrotron-based X-ray techniques directly address the core questions of modern materials science but are not yet at the stage of being easy to use because of the lack of dedicated beamlines optimized for specific measurements. In this article, we highlight a few of these X-ray techniques and discuss why, with ongoing upgrades of existing synchrotrons and with new linear-accelerator-based sources under development, now is the time to ensure that these techniques are readily available to the larger materials research community.

43 PARTICLE ACCELERATORS↗