Engineering topics

Sutton, R.

Publications and source records attributed to Sutton, R..

4 records

NASA NTRS1985

Cryogenic upper stage test bed engine

A vehicle system with unique characteristics will be needed in connection with the extension of the Space Transportation System (STS) from Low Earth Orbit (LEO) to Geosynchronous Equatorial Orbit (GEO) and beyond. These characteristics are determined by NASA missions related to the deployment of large space structures, satellite servicing, and manned sorties to geosynchronous orbit. Advances in vehicle design and operation will be required along with significant advances in engine technologies. A versatile, well-instrumented test bed engine will be needed for the evaluation of the required technologies. Developments leading to the fabrication and assembly of the first high chamber pressure expander cycle test bed engine are discussed. The test bed engine, which is called Integrated Component Evaluator (ICE), is required for the development of an advanced, cryogenic, upperstage engine.

Pauckert, R.↗

NASA NTRS1983

Application of 3D aerodynamic/combustion model to combustor primary zone study

A description is provided of the three-dimensional elliptic code for reacting flows used in the combustor design process during the program 'Small Gas Turbine Combustor Primary Zone Study' carried out by a U.S. company. The code, designated MARC-I (multidimensional aerodynamic recirculating combustion-Version I) is an adaptation of the model described by Mongia et al. (1979). The program has the objective to advance the technology of the small reverse-flow annular combustor design through an understanding of primary zone performance factors. The MARC-I code was used for performance predictions of both original designs and later modifications. A test program consisting of both primary zone sampling and overall combustor performance measurements was carried out. It was, therefore, possible to compare the analytical predictions with actual test measurements.

Sullivan, R. E.↗

NASA NTRS1977

Small, high-pressure liquid oxygen turbopump

A small, high-pressure, liquid oxygen turbopump was designed, fabricated, and tested. The pump was of a single-stage, centrifugal type; power to the pump was supplied by a single-stage, partial emission, axial-impulse turbine. Design conditions included an operating speed of 70,000 rpm, pump discharge pressure of 2977 N/sq cm (4318 psia), and a pump flowrate of 16.4 kg/s (36.21 lb/sec). The turbine was propelled by LO2/LH2 combustion products at 1041 K (1874 R) inlet temperature, and at a design pressure ratio of 1.424. The approaches used in the detail analysis and design of the turbopump are described, and fabrication methods are discussed. Data obtained from gas generator tests, turbine performance calibration, and turbopump testing are presented.

Csomor, A.↗

NASA NTRS1977

Small, high-pressure liquid hydrogen turbopump

A high pressure, liquid hydrogen turbopump was designed, fabricated, and tested to a maximum speed of 9739 rad/s and a maximum pump discharge pressure of 2861 N/sq. cm. The approaches used in the analysis and design of the turbopump are described, and fabrication methods are discussed. Data obtained from gas generator tests, turbine performance calibration, and turbopump testing are presented.

Csomor, A.↗