Engineering topics

Sweet, Adam

Publications and source records attributed to Sweet, Adam.

15 records

NASA NTRS2018

Design Considerations for a Variable Autonomy Executive for UAS in the NAS

This paper describes research targeted towards an autonomy executive (AOS) for UAS in the National Air Space (NAS). The project goal is to incrementally provide the knowledge and intelligence onboard a UAS to safely fly in the National Air Space, eventually autonomous from remote human ground crews and communicating directly with air traffic control. Longer-term, the goal is to provide the capability for pilotless air vehicles such as air taxis that will be key for new transportation concepts such as air mobility-on-demand. For both of these targeted applications, AOS is incorporating artificial intelligence capabilities that operationally meet human pilot competencies. Even when autonomy is achieved from a remote human ground crew, AOS will have variable degrees of autonomy with respect to air traffic control (ATC), just as human pilots do now. AOS has the capability of interacting in natural language with ATC, as well as through data link protocols. AOS can adapt to varying levels of autonomy and control directed by ATC in standard and relaxed FAA phraseology- from being vectored moment by moment, to accepting broad directives such as following a specified aircraft or sighting and avoiding traffic. AOS can autonomously manage contingencies such as vehicle systems degradations and failures. It incorporates a decision maker that takes information from multiple diagnostic reasoners, disambiguates (if needed) sensor results to specific failures using active mode changes, then projects forward the impact of the degradation on the nominal plan. If the nominal plan is no longer viable, then alternative plans are formulated, and subsequently selected and executed, including abort options.

Lowry, Michael↗

NASA NTRS2015

Software Testbed for Developing and Evaluating Integrated Autonomous Subsystems

To implement fault tolerant autonomy in future space systems, it will be necessary to integrate planning, adaptive control, and state estimation subsystems. However, integrating these subsystems is difficult, time-consuming, and error-prone. This paper describes Intelliface/ADAPT, a software testbed that helps researchers develop and test alternative strategies for integrating planning, execution, and diagnosis subsystems more quickly and easily. The testbed's architecture, graphical data displays, and implementations of the integrated subsystems support easy plug and play of alternate components to support research and development in fault-tolerant control of autonomous vehicles and operations support systems. Intelliface/ADAPT controls NASA's Advanced Diagnostics and Prognostics Testbed (ADAPT), which comprises batteries, electrical loads (fans, pumps, and lights), relays, circuit breakers, invertors, and sensors. During plan execution, an experimentor can inject faults into the ADAPT testbed by tripping circuit breakers, changing fan speed settings, and closing valves to restrict fluid flow. The diagnostic subsystem, based on NASA's Hybrid Diagnosis Engine (HyDE), detects and isolates these faults to determine the new state of the plant, ADAPT. Intelliface/ADAPT then updates its model of the ADAPT system's resources and determines whether the current plan can be executed using the reduced resources. If not, the planning subsystem generates a new plan that reschedules tasks, reconfigures ADAPT, and reassigns the use of ADAPT resources as needed to work around the fault. The resource model, planning domain model, and planning goals are expressed using NASA's Action Notation Modeling Language (ANML). Parts of the ANML model are generated automatically, and other parts are constructed by hand using the Planning Model Integrated Development Environment, a visual Eclipse-based IDE that accelerates ANML model development. Because native ANML planners are currently under development and not yet sufficiently capable, the ANML model is translated into the New Domain Definition Language (NDDL) and sent to NASA's EUROPA planning system for plan generation. The adaptive controller executes the new plan, using augmented, hierarchical finite state machines to select and sequence actions based on the state of the ADAPT system. Real-time sensor data, commands, and plans are displayed in information-dense arrays of timelines and graphs that zoom and scroll in unison. A dynamic schematic display uses color to show the real-time fault state and utilization of the system components and resources. An execution manager coordinates the activities of the other subsystems. The subsystems are integrated using the Internet Communications Engine (ICE). an object-oriented toolkit for building distributed applications.

Testbed↗

NASA NTRS2014

Demonstration of Prognostics-Enabled Decision Making Algorithms on a Hardware Mobile Robot Test Platform

Prognostics-enabled Decision Making (PDM) is an emerging research area that aims to integrate prognostic health information and knowledge about the future operating conditions into the process of selecting subsequent actions for the system. Previous work developing and testing PDM algorithms has been done in simulation; this paper describes the effort leading to a successful demonstration of PDM algorithms on a hardware mobile robot platform. The hardware platform, based on the K11 planetary rover prototype, was modified to allow injection of selected fault modes related to the rover’s electrical power subsystem. The PDM algorithms were adapted to the hardware platform, including development of a software module framework, a new route planner, and modifications to increase the algorithms’ robustness to sensor noise and system timing issues. A set of test scenarios was chosen to demonstrate the algorithms’ capabilities. The modifications to run with a hardware platform, the test scenarios, and the test results are described in detail. The results show a successful use of PDM algorithms on a hardware test platform to optimize mission planning in the presence of electrical system faults.

Prognosis↗

NASA NTRS2008

Testing HyDE on ADAPT

The IVHM Project in the Aviation Safety Program has funded research in electrical power system (EPS) health management. This problem domain contains both discrete and continuous behavior, and thus is directly relevant for the hybrid diagnostic tool HyDE. In FY2007 work was performed to expand the HyDE diagnosis model of the ADAPT system. The work completed resulted in a HyDE model with the capability to diagnose five times the number of ADAPT components previously tested. The expanded diagnosis model passed a corresponding set of new ADAPT fault injection scenario tests with no incorrect faults reported. The time required for the HyDE diagnostic system to isolate the fault varied widely between tests; this variance was reduced by tuning HyDE input parameters. These results and other diagnostic design trade-offs are discussed. Finally, possible future improvements for both the HyDE diagnostic model and HyDE itself are presented.

Sweet, Adam↗

NASA NTRS2006

Planning to Explore: Using a Coordinated Multisource Infrastructure to Overcome Present and Future Space Flight Planning Challenges

Few human endeavors present as much of a planning and scheduling challenge as space flight, particularly manned space flight. Just on the operational side of it, efforts of thousands of people across hundreds of organizations need to be coordinated. Numerous tasks of varying complexity and nature, from scientific to construction, need to be accomplished within limited mission time frames. Resources need to be carefully managed and contingencies worked out, often on a very short notice. From the beginning of the NASA space program, planning has been done by large teams of domain experts working months, sometimes years, to put together a single mission. This approach, while proven very reliable up to now, is becoming increasingly harder to sustain. Elevated levels of NASA space activities, from deployment of the new Crew Exploration Vehicle (CEV) and completion of the International Space Station (ISS), to the planned lunar missions and permanent lunar bases, will put an even greater strain on this largely manual process. While several attempts to automate it have been made in the past, none have fully succeeded. In this paper we describe the current NASA planning methods, outline their advantages and disadvantages, discuss the planning challenges of upcoming missions and propose a distributed planning/scheduling framework (CMMD) aimed at unifying and optimizing the planning effort. CMMD will not attempt to make the process completely automated, but rather serve in a decision support capacity for human managers and planners. It will help manage information gathering, creation of partial and consolidated schedules, inter-team negotiations, contingencies investigation, and rapid re-planning when the situation demands it. The fist area of CMMD application will be planning for Extravehicular Activities (EVA) and associated logistics. Other potential applications, not only in the space flight domain, and future research efforts will be discussed as well.

Balaban, Edward↗

NASA NTRS2005

Lessons Learned from Autonomous Sciencecraft Experiment

An Autonomous Science Agent has been flying onboard the Earth Observing One Spacecraft since 2003. This software enables the spacecraft to autonomously detect and responds to science events occurring on the Earth such as volcanoes, flooding, and snow melt. The package includes AI-based software systems that perform science data analysis, deliberative planning, and run-time robust execution. This software is in routine use to fly the EO-l mission. In this paper we briefly review the agent architecture and discuss lessons learned from this multi-year flight effort pertinent to deployment of software agents to critical applications.

Autonomous Sciencecraft Experiment (ASE)↗

NASA NTRS2005

Addressing the Real-World Challenges in the Development of Propulsion IVHM Technology Experiment (PITEX)

The Propulsion IVHM Technology Experiment (PITEX) has been an on-going research effort conducted over several years. PITEX has developed and applied a model-based diagnostic system for the main propulsion system of the X-34 reusable launch vehicle, a space-launch technology demonstrator. The application was simulation-based using detailed models of the propulsion subsystem to generate nominal and failure scenarios during captive carry, which is the most safety-critical portion of the X-34 flight. Since no system-level testing of the X-34 Main Propulsion System (MPS) was performed, these simulated data were used to verify and validate the software system. Advanced diagnostic and signal processing algorithms were developed and tested in real-time on flight-like hardware. In an attempt to expose potential performance problems, these PITEX algorithms were subject to numerous real-world effects in the simulated data including noise, sensor resolution, command/valve talkback information, and nominal build variations. The current research has demonstrated the potential benefits of model-based diagnostics, defined the performance metrics required to evaluate the diagnostic system, and studied the impact of real-world challenges encountered when monitoring propulsion subsystems.

Maul, William A.↗

NASA NTRS2004

Transient Region Coverage in the Propulsion IVHM Technology Experiment

Over the last several years researchers at NASA Glenn and Ames Research Centers have developed a real-time fault detection and isolation system for propulsion subsystems of future space vehicles. The Propulsion IVHM Technology Experiment (PITEX), as it is called follows the model-based diagnostic methodology and employs Livingstone, developed at NASA Ames, as its reasoning engine. The system has been tested on,flight-like hardware through a series of nominal and fault scenarios. These scenarios have been developed using a highly detailed simulation of the X-34 flight demonstrator main propulsion system and include realistic failures involving valves, regulators, microswitches, and sensors. This paper focuses on one of the recent research and development efforts under PITEX - to provide more complete transient region coverage. It describes the development of the transient monitors, the corresponding modeling methodology, and the interface software responsible for coordinating the flow of information between the quantitative monitors and the qualitative, discrete representation Livingstone.

Balaban, Edward↗

NASA NTRS2004

An Architecture to Enable Future Sensor Webs

A sensor web is a coherent set of distributed 'nodes', interconnected by a communications fabric, that collectively behave as a single dynamic observing system. A 'plug and play' mission architecture enables progressive mission autonomy and rapid assembly and thereby enables sensor webs. This viewgraph presentation addresses: Target mission messaging architecture; Strategy to establish architecture; Progressive autonomy with onboard sensor web; EO-1; Adaptive array antennas (smart antennas) for satellite ground stations.

Mandl, Dan↗

NASA NTRS2003

The Livingstone Model of a Main Propulsion System

Livingstone is a discrete, propositional logic-based inference engine that has been used for diagnosis of physical systems. We present a component-based model of a Main Propulsion System (MPS) and say how it is used with Livingstone (L2) in order to implement a diagnostic system for integrated vehicle health management (IVHM) for the Propulsion IVHM Technology Experiment (PITEX). We start by discussing the process of conceptualizing such a model. We describe graphical tools that facilitated the generation of the model. The model is composed of components (which map onto physical components), connections between components and constraints. A component is specified by variables, with a set of discrete, qualitative values for each variable in its local nominal and failure modes. For each mode, the model specifies the component's behavior and transitions. We describe the MPS components' nominal and fault modes and associated Livingstone variables and data structures. Given this model, and observed external commands and observations from the system, Livingstone tracks the state of the MPS over discrete time-steps by choosing trajectories that are consistent with observations. We briefly discuss how the compiled model fits into the overall PITEX architecture. Finally we summarize our modeling experience, discuss advantages and disadvantages of our approach, and suggest enhancements to the modeling process.

Bajwa, Anupa↗

NASA NTRS2003

Hybrid Concurrent Constraint Simulation Models of Several Systems

This distribution contains several simulation models created for the hybrid simulation language, Hybrid Concurrent Constraint (HCC). An HCC model contains the information specified in the widely-accepted academic definition of a hybrid system: this includes expressions for the modes of the systems to be simulated and the differential equations that apply in each mode. These expressions are written in the HCC syntax. The models included here were created by either applying basic physical laws or implementing equations listed in previously published papers.

Sweet, Adam↗

NASA NTRS2003

Lessons Learned from using a Livingstone Model to Diagnose a Main Propulsion System

NASA researchers have demonstrated that qualitative, model-based reasoning can be used for fault detection in a Main Propulsion System (MPS), a complex, continuous system. At the heart of this diagnostic system is Livingstone, a discrete, propositional logic-based inference engine. Livingstone comprises a language for specifying a discrete model of the system and a set of algorithms that use the model to track the system's state. Livingstone uses the model to test assumptions about the state of a component - observations from the system are compared with values predicted by the model. The intent of this paper is to summarize some advantages of Livingstone seen through our modeling experience: for instance, flexibility in modeling, speed and maturity. We also describe some shortcomings we perceived in the implementation of Livingstone, such as modeling continuous dynamics and handling of transients. We list some upcoming enhancements to the next version of Livingstone that may resolve some of the current limitations.

Sweet, Adam↗

NASA NTRS2001

Medium Fidelity Simulation of Oxygen Tank Venting

The item to he cleared is a medium-fidelity software simulation model of a vented cryogenic tank. Such tanks are commonly used to transport cryogenic liquids such as liquid oxygen via truck, and have appeared on liquid-fueled rockets for decades. This simulation model works with the HCC simulation system that was developed by Xerox PARC and NASA Ames Research Center. HCC has been previously cleared for distribution. When used with the HCC software, the model generates simulated readings for the tank pressure and temperature as the simulated cryogenic liquid boils off and is vented. Failures (such as a broken vent valve) can be injected into the simulation to produce readings corresponding to the failure. Release of this simulation will allow researchers to test their software diagnosis systems by attempting to diagnose the simulated failure from the simulated readings. This model does not contain any encryption software nor can it perform any control tasks that might be export controlled.

Sweet, Adam↗

NASA NTRS2001

Models of an In-Situ Propellant Production Plant for Mars Exploration

An in-situ propellant production system (ISPP) is designed to make rocket fuel from chemicals in the Martian atmosphere in order to reduce the amount of materials that would need to be brought from Earth to support Mars missions. We have developed a description of a hypothetical ISPP system that we would like to make available to researchers who are interested in the problem of automatically diagnosing failures in complex NASA systems. This problem description will help researchers to investigate problems of interest to NASA. We would like to make the following material publicly available: (1) a 'common sense' model of an ISPP system; (2) low- and medium-fidelity simulations of the ISPP system written in Microsoft Excel and HCC; and (3) previously published data and diagrams concerning ISPP components. We do not believe there are any export considerations on these materials for the following reasons: (1) These models are not useful for guidance and real time control of vehicles, encrpytion, or any other software purpose categorized under the Export Control Classification Numbers; and (2) The models are very high level and would not by themselves enable real-time control of a real hardware system. The models are at the level of common sense. They capture, for example, that if a heater is turned on an increase in temperature should result(see the attached excerpt). We do not believe there is any commercial value to this material, given the low commercial demand for propellant plants on mars. We have spoken to acting Code IC Division Chief Dan Clancy, and he concurs with our desire to make these materials publicly available via a technical report.

Goodrich, Charlie↗

NASA NTRS2001

[Low Fidelity Simulation of a Zero-Y Robot]

The item to be cleared is a low-fidelity software simulation model of a hypothetical freeflying robot designed for use in zero gravity environments. This simulation model works with the HCC simulation system that was developed by Xerox PARC and NASA Ames Research Center. HCC has been previously cleared for distribution. When used with the HCC software, the model computes the location and orientation of the simulated robot over time. Failures (such as a broken motor) can be injected into the simulation to produce simulated behavior corresponding to the failure. Release of this simulation will allow researchers to test their software diagnosis systems by attempting to diagnose the simulated failure from the simulated behavior. This model does not contain any encryption software nor can it perform any control tasks that might be export controlled.

Sweet, Adam↗