Search NASA⌕ Search

Engineering topics

Szydlowski, A

Publications and source records attributed to Szydlowski, A.

Monoenergetic proton emission from nuclear reaction induced by high intensity laser-generated plasma

A 10{sup 16} W/cm{sup 2} Asterix laser pulse intensity, 1315 nm at the fundamental frequency, 300 ps pulse duration, was employed at PALS laboratory of Prague, to irradiate thick and thin primary CD{sub 2} targets placed inside a high vacuum chamber. The laser irradiation produces non-equilibrium plasma with deutons and carbon ions emission with energy of up to about 4 MeV per charge state, as measured by time-of-flight (TOF) techniques by using ion collectors and silicon carbide detectors. Accelerated deutons may induce high D-D cross section for fusion processes generating 3 MeV protons and 2.5 MeV neutrons, as measured by TOF analyses. In order to increase the mono-energetic proton yield, secondary CD{sub 2} targets can be employed to be irradiated by the plasma-accelerated deutons. Experiments demonstrated that high intensity laser pulses can be employed to promote nuclear reactions from which characteristic ion streams may be developed. Results open new scenario for applications of laser-generated plasma to the fields of ion sources and ion accelerators.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ultraintense proton beams from laser-induced skin-layer ponderomotive acceleration

The results of studies of high-intensity proton beam generation from thin (1-3 {mu}m) solid targets irradiated by 0.35 ps laser pulse of energy up to 15 J and intensity up to 2x10{sup 19} W/cm{sup 2} are reported. It is shown that the proton beams of terawatt power and intensity around 10{sup 18} W/cm{sup 2} at the source can be produced when the laser-target interaction conditions approach the skin-layer ponderomotive acceleration requirements. The proton beam parameters remarkably depend on the target structure and can be significantly increased with the use of a double-layer Au/PS target (plastic covered by 0.1-0.2 {mu}m Au front layer)

43 PARTICLE ACCELERATORS↗

Laser-induced generation of ultraintense proton beams for high energy-density science

Basic properties of high-current high-intensity ion beam generation using laser-induced skin-layer ponderomotive acceleration (SLPA) are discussed. The results of a recent experiment, in which 0.35-ps laser pulse of intensity up to 2x10{sup 19} W/cm{sup 2} irradiated a thin (1-3 {mu}m) PS (plastic) or Au/PS target (PS covered by 0.1-0.2 {mu}m Au front layer), are presented. It is shown that multi-MA proton beams of current densities >1 TA/cm{sup 2} and intensities > 10{sup 18} W/cm{sup 2} at the source can be produced when the laser-target interaction conditions approach the SLPA requirements. The proton beam parameters as well as the laser-protons energy conversion efficiency substantially depend on the target structure and can be significantly increased with the use of a double-layer Au/PS target. A prospect for the application of SLPA-driven proton beams in ICF fast ignition research is outlined.

43 PARTICLE ACCELERATORS↗

Application of Solid State Nuclear Track Detectors in TEXTOR Experiment for Measurements of Fusion-Reaction Protons

The paper reports on measurements of the space distribution of fusion protons of energy equal to about 3-MeV, originating from the D(d, p)T reactions. The measurements were carried out on the TEXTOR facility by means of a small ion pinhole camera, which was equipped with a solid-state nuclear track detector of the PM-355 type. The results obtained in two series of successive discharges are compared. The first series was performed with an additional heating of TEXTOR plasmas with NBI of fast deuterons, whereas in the second series plasma was heated by ICRF and NBI of hydrogen neutrals. Computer simulations of different trajectories of charged particles have been performed with the Gourdon code and the detection efficiency has been calculated for various orientations of the measuring assembly.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of Neutron Yield from Deuterium Plasmas at JET by Activation Techniques

The paper reports on experiments carried out at JET to test the possibility of using some activating materials (e.g. {sup 89}Y, {sup 167}Er, {sup 204}Pb, {sup 180}Hf, {sup 111}Cd, etc.) to perform multi-foil neutron activation measurements. It is shown that apart from indium other materials can be successfully used in these measurements delivering more exact information about fluxes and also energy spectra of the analysed neutrons. These and other materials have threshold energy in the interesting energy range (0.5-15 MeV) and relatively large cross sections for the nuclear reactions, but have not been used in the activation measurements supposedly because produce daughter nuclides with a relatively short half-life time. We propose then some modification of the JET activation system mainly in order to convey the activation samples faster to the detector.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast-Neutron Source Based on Plasma-Focus Device

This paper describes investigations of neutrons produced by small plasma focus device PF-6 operating in the Institute of Plasma Physics and Laser Microfusion, Warsaw, Poland. Main parameters of neutron radiation have been measured by scintillation probe, and by activation technique. Current derivative probe has also been applied to measure dI/dt signal. Simultaneously neutron transport calculations have been carried out by Monte Carlo method. Finally, experimental measurements and numerical calculations have allowed concluding that plasma focus devices can be useful pulse neutron sources for different applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental Studies of Fast Protons Originated from Fusion Reactions in Plasma-Focus Discharges

The paper describes results of the recent measurements of fusion-reaction protons, which were performed within the PF-360 facility operated at the IPJ in Swierk, Poland. The main aim of those studies was to perform time-integrated measurements of fast protons (of energy of about 3 MeV) by means of ion-pinhole cameras, which were equipped with solid state nuclear track detectors (SSNTD) of the PM-355 type and absorption filters made of thin metal foils. In order to determine the spatial distribution of fusion-produced protons the use was made of several miniature pinhole cameras placed at different angles to the PF-360 axis. The irradiated and etched detectors were analyzed with an optical microscope coupled with a CCD camera and a PC unit.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗