Search NASA⌕ Search

Engineering topics

T Duncan Fairlie

Publications and source records attributed to T Duncan Fairlie.

Simulation of Radon-222 with the GEOS-Chem Global Model: Emissions, Seasonality, and Convective Transport

Radon-222 (Rn-222) is a short-lived radioactive gas naturally emitted from land surfaces and has long been used to assess convective transport in atmospheric models. In this study, we simulate Rn-222 using the GEOS-Chem chemical transport model to improve our understanding of Rn-222 emissions and surface concentration seasonality and characterize convective transport associated with two Goddard Earth Observing System (GEOS) meteorological products, the Modern-Era Retrospective analysis for Research and Applications (MERRA) and GEOS Forward Processing (GEOS-FP). We evaluate four global Rn-222 emission scenarios by comparing model results with observations at 51 surface sites. The default emission scenario in GEOS-Chem yields a moderate agreement with surface observations globally (68.9 % of data within a factor of 2) and a large underestimate of winter surface Rn-222 concentrations at Northern Hemisphere midlatitudes and high latitudes due to an oversimplified formulation of Rn-222 emission fluxes (1 atom cm−2 s−1 over land with a reduction by a factor of 3 under freezing conditions). We compose a new global Rn-222 emission scenario based on Zhang et al. (2011) and demonstrate its potential to improve simulated surface Rn-222 concentrations and seasonality. The regional components of this scenario include spatially and temporally varying emission fluxes derived from previous measurements of soil radium content and soil exhalation models, which are key factors in determining Rn-222 emission flux rates. However, large model underestimates of surface Rn-222 concentrations still exist in Asia, suggesting unusually high regional Rn-222 emissions. We therefore propose a conservative upscaling factor of 1.2 for Rn-222 emission fluxes in China, which was also constrained by observed deposition fluxes of 210Pb (a progeny of Rn-222). With this modification, the model shows better agreement with observations in Europe and North America (> 80 % of data within a factor of 2) and reasonable agreement in Asia (close to 70 %). Further constraints on Rn-222 emissions would require additional concentration and emission flux observations in the central United States, Canada, Africa, and Asia. We also compare and assess convective transport in model simulations driven by MERRA and GEOS-FP using observed Rn-222 vertical profiles in northern midlatitude summer and from three short-term airborne campaigns. While simulations with both GEOS products are able to capture the observed vertical gradient of Rn-222 concentrations in the lower troposphere (0–4 km), neither correctly represents the level of convective detrainment, resulting in biases in the middle and upper troposphere. Compared with GEOS-FP, MERRA leads to stronger convective transport of Rn-222, which is partially compensated for by its weaker large-scale vertical advection, resulting in similar global vertical distributions of Rn-222 concentrations between the two simulations. This has important implications for using chemical transport models to interpret the transport of other trace species when these GEOS products are used as driving meteorology.

Bo Zhang↗

TPSAS-NF1676L-33993-DND

Large volcanic eruptions are the primary sources of aerosols in the stratosphere and play an important role in the global climate system. The transformation of sulfur dioxide emitted by volcanoes into sulfuric acid droplets leads to a global cooling effect at the surface by enhanced reflection of solar radiation to space and reduced the earth's radiative budget for months to years. In June 2019, the Raikoke volcano, Kuril Islands (153.24167 E, 48.29167 N) emitted 1.4 Tg of SO2 between June 21st and 22nd with plume injection height between 7 and 15 km based on several ultra-violet and infrared sensors as well as the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) space-based lidar. CALIPSO and the NASA Langley Trajectory Model (LaTM) with GEOS5 meteorological data are used to track dispersed volcanic ash plumes. The trajectory mapping technique will be used to re-construct the 3-dimension structure of volcanic ash and sulfate. Results will be compared with independent observations from the Stratospheric Aerosol and Gas Experiment and GEOS-Chem model outputs to understand the transport of the plume into the stratosphere and its lifetime.

Hyundeok Choi↗

TPSAS-NF1676L-20351-DND

Characterization of atmospheric variability is crucial to the design of the Entry, Descent, and Landing (EDL) activities at Mars. The distribution of dust in the Martian atmosphere has a significant impact on the atmospheric structure and variability. Information obtained through reconstruction of EDL data from past missions can be used in studying the performance of a model used in preflight atmospheric characterization for future missions. We use the Mars Weather Research and Forecasting (MarsWRF) General Circulation Model to simulate the atmospheric temperature during the landing time periods of Mars Exploration Rovers MER-A and MER-B in 2004. The multi-scale capability of MarsWRF is useful for conducting high- resolution nested simulation centered at the landing site. This version of MarsWRF includes a high spectral accuracy k-distribution radiative transfer model. We use the IR dust opacity profile data from the Thermal Emission spectrometer (TES) limb scan data as well as the TES Nadir data to prescribe the dust opacity distribution. Data from MY 26, which corresponds to the year of MER landing, and data from a climatology based on the median of 4 years (MY24 to MY27) of TES data are used. Model temperature profiles are compared with the reconstructions from EDL data and TES observations. Sensitivity of the model simulation to variations in the input opacity data are shown.

Murali Natarajan↗

Assessing the Radiative Impact of the 2019 – 2020 Australian Bushfires using Trajectory-Mapped CALIPSO Observations.

During the 2019/2020 fire season, Australian bushfires burned 46 million acres, killed 39 people and billions of animals, and became the costlier fire season in Australian history. Between the end of December and early January, a series of pyrocumulonimbus injected thick smoke layers in the upper troposphere and lower stratosphere which were observed over the Tasmanian Sea and New Zealand by the Ozone Mapping and Profiler Suite (OMPS) and the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO). The smoke plume crossed the tropopause and was further dispersed across the Eastern Pacific Ocean rising up to 30 km height after two weeks. . In this study, we use CALIPSO and the NASA Langley Trajectory Model (LaTM), driven by Modern-Era Retrospective analysis for Research and Application, Version 2 (MERRA-2) meteorological data, to track the dispersion of Australian fire smoke plumes in both the troposphere and the stratosphere. Trajectory mapping is used to re-construct the 3-dimension structure of the smoke plumes. Results are compared with independent observations from the Stratospheric Aerosol and Gas Experiment (SAGE) III on the International Space Station (ISS) to understand the complex transport of the plume into the stratosphere and its lifetime. Using trajectory maps, the impact of the Australian bushfires on the Earth’s radiative energy budget is assessed with the Clouds and the Earth’s Radiant Energy System (CERES).

Australian Bushfires↗

Distribution and Sources of Tropospheric Aerosols Over the Western North Atlantic During ACTIVATE (February-March 2020)

The Aerosol Cloud meTeorology Interactions oVer the western ATlantic Experiment (ACTIVATE) is a five-year (2019-2023) NASA Earth-Venture Suborbital-3 (EVS-3) mission to robustly characterize aerosol-cloud-meteorology interactions during February-June, with a focus on marine boundary layer clouds. This characterization requires understanding of aerosol composition, distribution, transport pathways, and sources. Here we use the GEOS-Chem chemical transport model driven by the MERRA-2 reanalysis to simulate tropospheric carbon monoxide (CO) and aerosols over the western North Atlantic Ocean (WNAO) during the first field deployment of ACTIVATE (February-March 2020). CO is used as a tracer to diagnose transport pathways for continental pollution outflow to the WNAO. The aerosol simulation represents all major aerosols including sulfate-nitrate-ammonium (SNA), mineral dust, sea salt, black and organic carbon aerosols. Model-simulated mixing ratios of SNA and organic carbon are compared with aircraft observations. We show that intensive aerosol mass measurements in the lower troposphere over the North American outflow region during ACTIVATE provide strong constraints on model aerosol wet scavenging. Comparisons of model aerosol extinctions with the airborne High Spectral Resolution Lidar-2 (HSRL-2) measurements indicate that the model generally captures continental outflow of aerosols and enhanced extinctions associated with sea salt. Simulated aerosol optical depths (AODs) and extinction vertical profiles are also compared with satellite retrievals from MODIS/Aqua and CALIOP/CALIPSO, respectively. CALIOP sometimes observes enhanced aerosol extinction at altitudes between ~1.5km and ~2.0km south of 32°N. The model reproduces this enhancement and attributes it to coarse-mode sea salt associated with high relative humidity. The relative contributions of continental and oceanic sources to the aerosol loading, AOD, and their distributions over the study domain will also be discussed.

aerosols↗

Assessing the Radiative Impact of the 2019 – 2020 Australian Bushfires using Trajectory-Mapped CALIPSO and SAGE III/ISS Observations.

During the 2019/2020 fire season, Australian bushfires burned 46 million acres, killed 39 people and billions of animals, and became the costlier fire season in Australian history. Between the end of December and early January, a series of pyrocumulonimbus injected thick smoke layers in the upper troposphere and lower stratosphere which were observed over the Tasmanian Sea and New Zealand by the Ozone Mapping and Profiler Suite (OMPS) and the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO). The smoke plume crossed the tropopause and was further dispersed across the Eastern Pacific Ocean rising up to 30 km height after two weeks. . In this study, we use CALIPSO and the NASA Langley Trajectory Model (LaTM), driven by Modern-Era Retrospective analysis for Research and Application, Version 2 (MERRA-2) meteorological data, to track the dispersion of Australian fire smoke plumes in both the troposphere and the stratosphere. Trajectory mapping is used to re-construct the 3-dimension structure of the smoke plumes. Results are compared with independent observations from the Stratospheric Aerosol and Gas Experiment (SAGE) III on the International Space Station (ISS) to understand the complex transport of the plume into the stratosphere and its lifetime. Using trajectory maps, the impact of the Australian bushfires on the Earth’s radiative energy budget is assessed with the Clouds and the Earth’s Radiant Energy System (CERES).

Australian bushfire↗