Engineering topics

T M Erickson

Publications and source records attributed to T M Erickson.

14 records

NASA NTRS2024

A Diversity of Temperature and Pressure Conditions Recorded by Zircon within Suevite from Ries Crater, Germany

The temperature and pressure conditions experienced by rocks during an impact event can be constrained using petrologic and microstructural analysis and is crucial to providing ground truth to the impact cratering process. Suevite is a polymict, impact melt-bearing breccia, specific to Ries crater in Germany. There are competing models for suevite formation and emplacement, such as clastic flows pushed out of the crater rim or ejecta plume fallback. Knowledge of the temperature and pressure pathways recorded by grains within the suevite can help distinguish between these and other models. The accessory phase zircon (ZrSiO4) and its high-pressure polymorph reidite are particularly useful in such circumstances as they are highly refractory minerals that can record the high-temperature and/or high-pressure conditions of an impact event. Here we present evidence for a wide array of temperature and pressure conditions recorded in zircon grains within a single thin section of suevite. Zircons in this study range from unshocked to highly shocked (>53 GPa), and record temperatures more than 1673 °C. These findings confirm previous studies concluding that suevites contain material exposed to very diverse pressure and temperature conditions during initial shock compression and excavation but do not, as a whole, experience extreme temperatures (>1673 °C) or pressures (>30 GPa).

mineralogy↗

NASA NTRS2024

The Relationship Between Volatile Element Abundances and Iron Carrying Capacity in Lunar Volcanic and Impact Vapors

The highly volatile elements (e.g. H, C, S, Cl) released during lunar volcanism provide important insights into the bulk volatile composition of the Moon. Once erupted, some fraction of the species containing these elements may have migrated to the poles where they could have become sequestered in shadowed cold traps such as those found near the lunar South pole. The volatiles trapped in the lunar South pole are of great interest to the upcoming Artemis missions, which will be operating nearby and could sample some of those materials. Volcanic vapor deposits in the polar regions might also be supplemented by volatiles from other sources both exogenous (i.e. comets) and endogenous (i.e. remobilization of lunar volatiles by impact). Characterizing these endogenous sources is challenging because the highly volatile elements often leave little trace behind in the rocks themselves, which are inherently refractory by nature. Minerals are found on vug, vesicle, or fracture surfaces that have characteristics consistent with phases formed via direct deposition of a vapor, as opposed to crystallization from a liquid or via solid state decomposition. One common vapor-deposited species is metallic Fe, typically observed as subhedral to euhedral crystals found on vug or vesicle walls in mare basalts and on select breccia clast surfaces in regolith soil samples returned from the Moon. A particularly striking example is seen below in Fig. 1, where numerous Fe crystals are deposited onto the wall of a vug in Apollo 17 basalt sample 71036. Euhedral Fe crystals are not very common in Apollo breccia samples, though this may be from the limited number of systematic searches that have been performed. However, when Fe crystals are found, they can occur in extremely high abundance(e.g., sample 15402 which was specifically selected because of its numerous Fe crystals, was found to have a clast with 477 euhedral Fe crystals in a 570 x 570 μm area). What struck us as interesting about this was not only that it takes a large amount of Fe to make these crystal-rich deposits, but also that these crystal-rich deposits are not ubiquitous, and therefore they must be controlled by some aspect of their depositional conditions that varies. Since those conditions are inherently difficult to investigate and are critically interesting, we used thermochemical modeling as a tool to investigate the relationship between vapor-deposited Fe and various intensive and extensive parameters. We assumed that a high abundance of Fe in the vapor is required to form these crystals, thus the mass of Fe in the vapor was used to determine the plausibility of the vapor-deposited, euhedral Fe crystals observed in Apollo samples.

thermodynamics↗

NASA NTRS2024

Constraining the Thermal and Textural Evolution of Evolved Achondrite DOM 10100: Implications for Volatile Loss

Identification of evolved achrondritic clasts suggests that some early planetesimals experienced extensive differentiation and formed chemically evolved crusts. Many of these samples contain volatile-bearing phases (i.e., apatite, merrillite, nominally anhydrous minerals), which can be used to constrain volatile budgets and abundancies via in-situ measurements. These ancient crustal rocks are subject to high heat, moderate pressures, potentially hot mineral-rich fluids, and degassing that has likely modified many of these volatiles, and their abundancies do not represent the composition of the primary magma from which these achondrites formed. In this work we attempt to deconvolve the thermal evolution of these samples to provide petrologic information that can be used for making inferences regarding their volatile history, and ultimately constraining volatile budgets on planetary bodies in the early Solar System. Here, we combine in-situ major element geochemistry, thermodynamic modeling, and detailed textural and microstructural observations to reconstruct the thermal and textural evolution of howardite DOM 10100, which contains a dacite within its matrix. Previous analyses of several sections of DOM 10100 suggest that the dacitic clast is evidence for partial melting of Vesta’s differentiated basaltic crust, making it an ideal candidate for evolved crustal studies. While its igneous petrogenesis has been well constrained, there is still opportunity to better characterize its post-crystallization thermal history, including possible thermal metamorphism and cooling.

J S Gorce↗

NASA NTRS2024

Microstructural Evolution of the Civet Cat Norite (72255)

The ‘Civet Cat Norite’ is a ~ 2.5 cm clast within the Apollo impact melt breccia sample 72255 collected during Apollo 17 EVA 2 at Boulder 1. The norite is primarily composed of plagioclase and orthopyroxene with fine-scale exsolution lamellae of augite. The plagioclase and orthopyroxene (OPX) coexist with minor quartz and augitic clinopyroxene (CPX), and accessory apatite, baddeleyite, chromite, ilmenite, loveringite, merrillite, rutile and zircon. The major minerals range from 1 to 4 mm in size and show a cataclastic texture indicated by banding of the light and dark phases]. The chemical composition of the orthopyroxene, augitic exsolution lamellae, and exsolved oxides suggest the norite crystallized in the lower crust of the Moon (10 – 70 km depth) and was subsequently excavated by impact(s). Shock pressure estimates for the norite range from 15 – 35 GPa based on maskeleynite formation within the plagioclase, kink banding in pyroxenes, and granular recrystallization in the accessory phosphates. Previous Rb-Sr and 40 Ar/ 39 Ar analyses recalculated with modern decay constants yield relatively young ages of 4.16 ± 0.05 Ga and 3.99 ± 0.03 Ga, respectively. However, recent U-Pb analyses of some zircon grains from within the Civet Cat yield an age of 4.45 ± 0.03 Ga. While this is the oldest age for any rock recovered from the Moon, the full age spread of zircon from the Civet Cat range from ca. 4.46 to 4.02 Ga, indicating variable Pb-loss and complicating interpretation of the primary age. Recent atom probe analyses indicate minimal Pb mobilization within the oldest zircon grain from Civet Cat, supporting the interpretation that these ancient zircon ages reflect the age of the norite, rather than an apparent antiquity caused by reverse discordance. To investigate the potential antiquity and deep crustal origin of the Civet Cat norite, we have undertaken high resolution microstructural analyses of the major, minor, and accessory minerals to characterize the primary igneous textures and secondary overprinting by impact and metamorphism. The employed analytical techniques include scanning electron microscope-based electron backscatter diffraction (EBSD) analyses, electron probe microanalyzer (EPMA) chemical analyses, and transmission electron microscopy (TEM) of pyroxene, plagioclase, quartz, zircon, and phosphates.

T M Erickson↗

NASA NTRS2024

Tracing Presolar Grain Populations Through Matrix Alteration Histories

Primitive meteorites preserve remnants of evolved stars as presolar grains, from asymptotic and red giant branch stars, novae and supernovae. These grains retain records of the formation mechanisms of the stellar environment from which they condensed, as well as physical and chemical processes in the interstellar medium (ISM), solar nebula and the parent bodies in which they are found. Consequently, their study can refine our understanding of the solar system and external stellar and planetary systems. However, presolar grains and their records can be altered, re-equilibrated with the surrounding matrix, and eventually lost through aqueous and thermal processing on the meteorite parent body. NanoSIMS is the most rapid and effective method for in situ identification of presolar grains via their highly anomalous isotopic ratios. Previous studies have measured variations in presolar grain populations between different matrix regions within the same meteorite thin section. However, most of these studies do not identify if there are any ties between these variations in presolar grain populations and the chemical and mineralogical differences in measured matrix regions. Therefore, the goal of this study is to determine if there is measurable variations in the degree of alteration of different matrix regions within the same thin section, and if mineralogical and chemical changes in matrix regions can be used as indicators for presolar grain preservation. Such a correlation could improve the efficiency of presolar grain identification during searches across large surface areas. To do this, we carried out coordinated scanning electron microscope (SEM) and NanoSIMS analyses, using a new SEM method which measures the ppm concentration of 100 nm to 5 μm sized Mg-, S-, Al-, C- and Ca-rich matrix grains.

presolar grains↗

NASA NTRS2022

Analysis of Solar Wind Damage in Genesis Sapphire Sample 61527

The Genesis mission collected samples of the solar wind (SW) by passive implantation into a variety of semiconductor (and other) materials and re-turned them to Earth in 2004. Subsets of these col-lector materials were exposed to either bulk solar wind, high-speed (coronal hole) solar wind, low speed (inter-stream) solar wind, or coronal mass ejections (CMEs). Although of short duration relative to naturally space-weathered materials, these exposures to SW caused structural damage (and related chemical changes) in silicon. Here we explore the structural consequences of bulk SW collection into Genesis single crystal sapphire.

L P Keller↗

NASA NTRSDate not supplied

Apollo Sample 64455: Petrologic and Geochemical Characterization of a Glass-Coated Impact Melt Rock

Introduction and Background: Impact melts are a key product of the impact cratering process. Impact melts can turbulently entrain pre-existing rock fragments, and melt part of those entrained materials until thermal equilibrium is achieved [1–3]. Lunar impact melt rocks are valuable for determining the precise ages of basin-forming and cratering events, which anchor the cratering chronology and dynamics of the entire solar system [4, and references therein]. Additionally, entrained clasts can inform on the petrology and age of crustal materials that predate the melt-forming impact. In lithologies where no pristine samples are available, entrained materials may hold the record of endogenous lunar volatiles, provided we can untangle their impact histories as high temperature impact melt can heat the clasts and may alter their native volatiles or isotopic signatures [5–6]. Here, we characterize an Apollo 16 sample, 64455,70B, in an effort to understand the physical, microstructural, and geochemical consequences of impact melt contact metamorphism. We acquired optical light and x-ray maps of the sample, as well as quantitative analyses via electron probe microanalysis (EPMA). These tasks allow us to better understand the interaction between impact melts and entrained clasts, ultimately closing knowledge gaps in high-temperature impact processing on planetary surfaces. Sample Description: Sample 64455 is an oblong crystalline rock encased in glass to form an egg-like shape [7–8]. The impact melt coating has altered the outer (1 to 2 mm) rind of the crystalline rock and has preserved schlieren. The interior crystalline rock is likely a crystalline impact melt rock based on its bulk Ir content of 2.25 parts per billion [9]. The composition of the impact melt glass rind cannot be solely derived from the crystalline interior, the glassy rind is more aluminous and less magnesian [10]. Neither the crystalline interior nor the glassy rind were radiometrically age dated, although several studies investigated its cosmogenic isotopes and exposure ages, which reveal the sample was exposed on the lunar surface for ~1–2 Ma [11–13]. Preliminary Results: The interior crystalline rock consists primarily of plagioclase with interstitial pyroxene and olivine. Plagioclase grains are zoned and compositions range from An97–89, while pyroxene compositions generally range from En68Fs19Wo13 to En82Fs15Wo3 and olivine are Fo77 to Fo85. Minor phases include Fe-Ni metal, Ca-phosphates, a K- and Si-rich phase, sulfides, and Fe-phosphides. The glass rind contains approximately 44 wt.% SiO2, 25 wt.% Al2O3, 6 wt.% FeO, 8 wt.% MgO, and 14 wt.% CaO, with other oxides at <1 wt.% each, although the composition of the glass becomes more variable closest to the crystalline rock. The rind consists of rounded plagioclase, pyroxene, and olivine crystals with interstitial melt. In some locations, the rounded crystals are surrounded by closely-packed, blade-like crystals, <5 µm in width. These results indicate that the crystalline interior has partially melted where in contact with the high-temperature impact melt and while further investigation is needed, pyroxene may have preferentially melted relative to olivine and plagioclase. Future Work: We plan to conduct electron backscatter diffraction (EBSD) mapping in order to determine crystallinity and crystal orientation. Next using transmission electron microscopy (TEM) data in conjunction with EBSD and EPMA information, we will model the diffusion of moderately volatile elements between the melt and remnant crystals.

A C Stadermann↗

NASA NTRSDate not supplied

Zircon, Baddeleyite, and Reidite Found in Ries Crater Suevite

Introduction: Impact events can generate superheated impact melts and even vapor [1]. In the past decade, evidence of the high temperatures and high pressures of the impact process has been found in the impact melt from terrestrial craters (e.g., Mistastin Lake [2], Meteor Crater [3]) and even on the Moon [4–5]. Often, these studies involve zircon or zirconium-bearing phases. Zircon is a particularly useful mineral, due to its robustness and durability against weathering. It is used principally for chronology, but it has a multitude of geologic applications, including geothermometry and fingerprinting magma sources. Here we focus on its capability of recording impact conditions. Grains of zircon (ZrSiO4) are converted at high temperature and/or pressure during an impact event to reidite (a high-pressure polymorph of ZrSiO4) or to tetragonal-ZrO2 + SiO2 [6]. Reidite and tertragonal-ZrO2 leave identifying relicts in the rocks, markers of the high pressures and/or temperatures these rocks underwent. Ries Crater is a 26-km-diameter peak ring crater in southern Germany that formed approximately 15 Ma [7–9]. Ries is the type locality of the polymict impact breccia known as suevite. Here, we report a microanalytical study of suevite from the Ries impact structure. These analyses are used to inform our understanding of the pressure and temperature conditions involved in creating a polymict impact breccia such as suevite in a peak ring crater. Sample Description: The sample, denoted 16RS08, originates from Otting Quarry, at 48.8777° N, 10.7921° E, approximately 17 km from the center of the Ries Crater in Germany (approximately 4 km outside the crater rim). The material recorded in sample 16RS08 is therefore considered an outer suevite. The outer suevite is a discontinuous layer of polymict impact breccia that occurs outside the central ring of Ries, up to 22 km from the center of the crater [9]. Lithic clasts in the outer suevite consist primarily of crystalline basement rocks (gneiss, granite, amphibolite), with less than 5% of lithic clasts being overlying sedimentary rocks (limestone, sandstone, shale) [9]. The thin section studied contains variably shocked lithic and mineral clasts, impact glass, and interstitial minerals that make up the matrix of the breccia (Fig. 1) [9]. Methods: We used a Cameca SX100 electron probe microanalyzer (EPMA) located in the Kuiper Materials Imaging and Characterization Facility (KMICF) at the University of Arizona to obtain 15 elemental X-ray maps of 16RS08. We next used the JEOL 7900F SEM at the Astromaterials Research & Exploration Science (ARES) at NASA Johnson Space Center (JSC) to obtain electron backscatter diffraction (EBSD) maps and energy dispersive X-ray spectroscopy (EDS) maps of select portions of the section. The EBSD data were collected under beam conditions of 20 kV, and ~9 μA, with step sizes varying from 0.05 to 2 μm. Following EBSD data collection, we processed the data using AZtecCrystal and MTEX, a free MATLAB toolbox. Results: We used the elemental X-ray maps to identify the areas of interest in the section, particularly phosphates and Zr-bearing grains. These areas of interest were then targeted for follow up EBSD and EDS analyses. We have identified, through combined EBSD and EDS analysis, the presence of zircon, reidite, and monoclinic-ZrO2 (baddeleyite) in 16RS08. In 16RS08, we have found singular grains of zircon, zircon with a vermicular baddeleyite halo (Fig. 2a), and granular zircon with reidite (Fig. 2b). The different Zr-rich phases and their corresponding textures signifies that this sample underwent a broad spectrum of pressure and temperature conditions during the impact event. For example, zircons surrounded by a vermicular baddeleyite and SiO2 intergrowth (i.e., Fig. 2a) have been shown to preserve evidence of the extremely high temperatures of impact melt, upwards of 2370 °C [2, 6]. Similarly, reidite and granular zircon (i.e., Fig. 2b) have been shown to preserve evidence of high pressure, as the transition to reidite occurs >30 GPa [3, 6]. Future Work: Next, we will process the EBSD and EDS data for these Zr-rich grains, specifically looking for indicators of cubic- or tetragonal-ZrO2 in the baddeleyite remnants and of shock-precursors to the reidite. To further inform our work, we will also obtain BSE images of these grains using a Hitachi S-4800 SEM in KMICF at the University of Arizona, as well as geochemical spot analyses via EPMA. The data collected will be used to constrain the formation conditions of the Ries Crater outer suevite. Acknowledgments: We thank Ken Domanik and Jerry Chang for their support with data collection. This work was supported by a University of Arizona RII Core Facilities Pilot Program grant and start-up funds to JJB. TME thanks A. Cavosie and N. Timms for assistance during field sampling. We acknowledge support from NASA’s Planetary Science Research program for analysis performed at JSC. References: [1] Melosh H. J. (1989) Oxf. U. Press. [2] Timms et al. (2017) EPSL 477, 52–58. [3] Cavosie et al. (2016) Geology 44:9, 703–706. [4] White et al. (2020) Nature Astr. 4, 974–978. [5] Crow C. A. et al. (2017) GCA 202, 264–284. [6] Timms et al. (2017) Earth-Sci. Rev. 165, 185–202. [7] Schmieder M. et al. (2018) GCA 220, 146–157. [8] Schwarz W. H. et al. (2020) M&PS 55:2, 312–325. [9] Stöffler et al. (2013) M&PS 43:4, 515–589.

Zircon↗

NASA NTRSDate not supplied

Pink Spinel in Apollo Impact Melt Rock 68815: Implications for Mg-Suite Magmatism

Introduction: Magnesian rocks from the lunar highlands are collectively termed the Mg-suite. Characterized by high (>60) Mg# (molar 100×Mg/[Mg+Fe]) in mafic phases and calcic plagioclase, these rocks are plutonic to hypabyssal in origin, and include a range of bulk mineralogies such as troctolites, dunites, norites, gabbronorites, and spinel troctolites [1]. These Mg-suite lithologies have distinct trace element concentrations and ratios that differentiate them from other lunar rock types. These rocks are ancient, generally dated to between 4.5 and 4.1 Ga, although it is unknown if this represents the full range of Mg-suite ages [1–2]. Among the Mg-suite lithologies, the spinel troctolites are relatively rare, to date only found in polymict breccias [3]. Spinel troctolites, as their name suggests, consist of calcic plagioclase and forsteritic olivine, with minor amounts of spinel (MgAl2O4), ± pyroxene and cordierite [1,4]. This form of spinel is often called ‘pink’ spinel because of its appearance in thin section under plane polarized light (PPL; Fig. 1), due to minor amounts of Cr. Spinel troctolites are generally plutonic or hypabyssal in origin (subsequently exhumed and incorporated into polymict breccias), or formed through impact processes (e.g., crystalline impact melt) [5]. A spinel-rich lithology has also been found in the Moscoviense region of the Moon via the Moon Mineralogy Mapper (M3) and lacks other mafic phases [6]. Finally, while the Mg-suite sampled thus far consists of plutonic (or hypabyssal) rocks, the question remains if such magmas could have erupted on the surface of the Moon [7]. These magmas have much lower density than mare basalts, but little sample or remote sensing evidence has been found to support the idea that extrusive Mg-suite volcanism occurred [7]. Here, we present a coordinated microanalytical study of spinel-bearing lithic and mineral clasts found in Apollo sample 68815. These data will be used to understand their petrogenesis (magmatic or impact) and modification histories, and to shed light on the existence of volcanic Mg-suite rocks. Sample Description: Apollo sample 68815 is a polymict impact melt breccia containing a variety of lithic and mineral fragments embedded in devitrified impact melt. This sample was chipped off the top of a boulder at Station 8 during the Apollo 16 mission and had an original weight of nearly 1.8 kg. In this study, we investigated two polished thin sections of 68815: 68815,17 and 68815,148, both containing spinel. Methods: The thin sections of 68815 were studied using optical light microscopy (PPL, cross-polarized light, and reflected light) with a Keyence VHX-7100 Digital Microscope. Each section was then X-ray mapped for 13–14 elements using a Cameca SX100 electron probe microanalyzer (EPMA) located in the Kuiper Materials Imaging and Characterization Facility (KMICF) at the University of Arizona. We have obtained geochemical information about the phases (olivine, plagioclase, spinel, pyroxene) in the thin sections also using the EPMA. In addition, we have used ThermoScientific Helios NanoLab 660 Focused-Ion-Beam Scanning-Electron Microscope (FIB-SEM) and a Hitachi S-4800 SEM (both in KMICF) to obtain backscattered electron (BSE) images and energy dispersive Xray spectrometry (EDS) maps of areas of interest. Using a JEOL 7900F SEM at the Astromaterials Research & Exploration Science (ARES) at NASA Johnson Space Center (JSC), we have obtained electron backscatter diffraction (EBSD) maps of the spinel-bearing portions of the thin sections. The EBSD data were collected under beam conditions of 20 kV, and ~90 μA, with step sizes varying from 0.05 to 2 μm. Following EBSD data collection, we processed the data using AZtecCrystal and MTEX, a free MATLAB toolbox. Results: We have found clasts with subophitic textures, that consist of primarily olivine and plagioclase, with minor amounts of pink Mg-Al spinel and pyroxene (Fig. 1). These clasts are up to ~1 mm in length and contain spinels up to 50 μm across. We have additionally identified pink Mg-Al spinels within the impact melt (i.e., not contained in lithic clasts) in both thin sections. In one instance, a single spinel grain is approximately 300 μm across (Fig. 1b, 2). The spinel fragments embedded in impact melt have varying compositions, typically distinct from the compositions of spinels in the lithic clasts. Spinel-Bearing Clasts: Ten lithic clasts with similar textures and mineral compositions were identified between 68815,17 (two clasts) and ,148 (eight clasts). These clasts fall into two groups. The first has skeletal olivine with intergranular plagioclase, with minor amounts of pyroxene and spinel (Fig. 1a, 2c, 2d). The spinel in these clasts are found amid the plagioclase. The second group have an intergranular texture of olivine and plagioclase, again with minor spinel and pyroxene. The second group may contain spinels surrounded by plagioclase, and spinels enclosed in olivine. Spinels located within both clast types range from no apparent Cr zoning, to reverse zoning (Cr-enrichment inward; Fig. 2d), to normal zoning (Cr-enrichment outward). In the clasts thus far investigated with EPMA, plagioclase compositions range from An# (molar 100×Ca/[Ca+Na+K]) 92–96. Olivine Mg# ranged from 77 to 94, while pyroxene had Mg# from 54–84. Spinel in the clasts have Cr# (molar 100×Cr/[Cr+Al]) 2–4 and Mg# 88–91, which is within the range of pristine and plutonic spinel troctolites [8]. Isolated Spinels: These crystals are generally euhedral to subhedral, and can exhibit reverse Cr zoning (Cr enrichment inward) or no apparent Cr zoning. The spinels thus far investigated via EPMA have Cr# 9–14 and Mg# 65–82. The Cr# for these spinels is within the range reported by [8], but have lower Mg#. Future Work: We will continue to process the EBSD data for these lithic and mineral clasts. We will also continue to characterize these clasts using EPMA and SEM. By thoroughly characterizing the various spinels and spinel-bearing clasts, we aim to constrain the petrogenesis of these minerals and rock fragments. Acknowledgments: We thank NASA for the loan of these thin sections. We thank Ken Domanik and Jerry Chang for their support with data collection. Work was supported by a University of Arizona RII Core Facilities Pilot Program grant and start-up funds to JJB. We acknowledge support from NASA’s Planetary Science Research program for analysis performed at JSC. References: [1] Shearer C. K. et al. (2015) Am. Min. 100, 294–325. [2] Borg L. E. et al. (2020) GCA 290, 312–332. [3] Warren P. H. (1993) Am. Min. 78, 360–376. [4] Dymek R. F. et al. (1976) LPS VII, 2335–2378. [5] Treiman et al. (2019) Am. Min. 104, 370–384. [6] Pieters et al. (2011) JGR: Plan. 116:E00G08. [7] Prissel et al. (2016) Icarus 277, 319–329. [8] Prissel et al. (2016) Am. Min. 101, 1624–1635.

spinel↗

NASA NTRSDate not supplied

Coordinated Microstructural and Isotopic Characterization of Diamond Inclusions within the Kenna Ureilite

Introduction: The origin of diamonds in ureilitic meteorites, a major family of ultramafic achondrites, has long been debated, with various formation mechanisms inferred, including: 1) shock conversion of preexisting graphite due to a hypervelocity impact on the ureilite parent body [e.g., 1]; 2) vapor deposition during condensation of the solar nebula [e.g., 2]; or 3) static transformation in the mantle of a large planetesimal (>1000 km in diameter) [e.g., 3]. The Kenna ureilite is a 10.9 kg stone that was found in Kansas in 1972 and is dominantly composed of olivine and pigeonite (68% and 22% modal abundance, respectively), together with minor metal and carbon-rich regions. Within the carbon-rich domains researchers have identified microdiamonds up to ~10 µm in size [4]. Methods: Due to the proximity of the extremely hard microdiamonds with soft graphite and moderately hard silicates, achieving an appropriately flat surface for electron backscatter diffraction (EBSD) analysis has proven challenging. We have, therefore, employed a Hitachi ArBlade 5000 broad beam Ar ion milling system to prepare a sample with an adequately uniform surface flatness across the various minerals. The ion milling dramatically im-proved indexing of the EBSD patterns and facilitated high-resolution microstructural analysis of the carbon-rich domains. After microstructural EBSD analyses using an Oxford Symmetry detector we collected coordinated hy-perspectral cathodoluminescence (CL) analyses using a Gatan Monarc system mounted on a JEOL 7900F field emission (FE) scanning electron microscope at NASA Johnson Space Center. A focused ion beam (FIB) foil was extracted from a region of interest and analyzed using a JEOL 2500 FE scanning transmission electron microscope (STEM). In situ carbon and nitrogen isotopic analyses were collected from diamond-bearing domains using a Cameca NanoSIMS 50L at NASA JSC. Results: The carbon rich regions occur as tabular domains between polygonal olivine and pigeonite, and are composed of aggregates of micrometer-scale diamond with intermediate graphite, oxides and metal grains. Within the microdiamonds, {111} twins are abundant, many of which form ragged lamellae consistent with mechanical twinning. The microdiamond assemblages appear to pseudomorph tabular graphite habits, which together with the abundant deformation twins, support a shock transformation mechanism for microdiamond formation within the Kenna meteorite. Further supporting this observation, the diamond laths show close alignment of <111> and <110> between domains, consistent with a solid-state transformation from graphite along <0001> and <1-210>, respec-tively [5]. A FIB foil was extracted from a region with mechanical twins, and high resolution STEM analyses reveal cross-cutting veins of graphite and oriented kamacite crystals together with additional sets of {111} nano-twins formed in at least three orientations. Isotopic analyses of C and N reveal sector zoning patterns [cf. 3] that are unre-lated to the diamond substructure identified by EBSD yet consistent with hyperspectral CL images. Conclusions: These data provide new constraints on microdiamond formation within ureilites. The microdia-monds exhibit orientation variants defined by aligned <111> and <110> axes consistent with inherited crystallo-graphic orientations from transformation of a single hexagonal graphite parent crystal [5]. Crosscutting the micro-diamonds are veins of graphite and kamacite, together with additional {111} nanotwins. Taken together these data suggest that microdiamonds from ureilites formed from a solid state, diffusionless transformation from graphite, likely associated with a major shock event, which was subject to subsequent reversion either during decompression or a later deformation event. The N and C isotopic sector zoning is unrelated to diamond microstructures and likely reflects inheritance from the parent graphite crystal.

Ureilite↗

NASA NTRSDate not supplied

Tracing Nebular Reservoirs and Processes Via In-situ Trace Element Analyses of Chondrule Rims in Allende

Introduction: Layered rims of dust-sized material surround some chondrules and other early formed nebular particles, such as calcium aluminum inclusions in chondritic meteorites. Most chondrules (~85%) in the Allende meteorite (CV3) are un-rimmed and in direct contact with the host material or matrix. For the 15% of rimmed particles, rim thickness is correlated to the underlying particle size, arguing for pre-parent body formation of rimmed particles as they traversed distinct (cooler and/or dustier) nebular environments. Nebular rim formation involves accretion of unequilibrated dust to chondrule surfaces, recording evidence for the formation of at least two separate particle populations (chondrules and dust) that interacted in the nebula, and therefore potentially record distinct nebular reservoirs.

J B Setera↗

NASA NTRSDate not supplied

207Pb-206Pb Geochronology and Microstructures of Phosphates From Apollo 14 and 15 Soils

Phosphates (apatite and merrillite) are common accessory minerals in many Apollo basalt and regolith samples. Phosphates typically have lower closure temperatures than their companion accessory phase zircon for their U-Pb and (U-Th)/He geochronologic systems [e.g., 1, 2]. As such, the ages of phosphates in impact melt-bearing breccias have typically been used to constrain the ages of impact events [3]. Phosphates have also served as anchors for 207Pb-206Pb isochrons allowing for precise ages of basaltic samples to be determined [4]. Apatite is also a reservoir for volatile species (e.g., F, Cl, OH, S) [e.g., 5, 6] which are important for investigating the formation and evolution of the lunar interior [7-11]. Recent work by [11] and [12] has shown that deformation and exposure to high temperatures, especially those in impact environments, can influence both apatite chronology and chemistry. Here we present the first chronology and microstructure results of a large consortium study aimed at unraveling the impact and endogenous volatile record of phosphates extracted from lunar soils. These soils potentially sample a larger range of lithologies than the rocks returned by Apollo astronauts, and should, therefore, represent a more global phosphate record. For more information on low temperature (U-Th)/He thermochronology, please see the companion abstract [13].

C A Crow↗

NASA NTRSDate not supplied

Modeling 238U/204Pb (μ) and Initial Pb of Lunar Meteorite Northwest Africa 12593

Apatite Ca 5 (PO 4 ) 3 (F, Cl, OH) serves as a valuable analytical resource. It is the only nominally hydrous phase on the moon and possesses the capacity to concentrate elements like U, Th, Pb, and rare earth elements (REE). This characteristic facilitates its use in U-Pb and Pb-Pb geochronology, allowing for the determination of the initial isotopic Pb and the -238 U/ -204 Pb ratio (μ) of the parent melt. In situ analysis of apatite grains can provide a detailed record of geochemical changes, revealing the broader petrogenetic and volatile history of the source material. This mineral is particularly informative in understanding the developmental history of its source. In situ analyses are crucial for lunar samples, predominantly composed of breccias, where correlating distinct grains with whole rock analyses poses challenges. This study utilizes in situ apatite isotopic analysis of apatite grains in lunar meteorite Northwest Africa 12593 and model the initial Pb isotopic composition and -238 U/ -204 Pb (μ) of the source. We present in situ Secondary Ionization Mass Spectrometry (SIMS) Pb-Pb analyses of 12 apatite grains in Northwest Africa (NWA) 12593 to test two hypotheses: 1) NWA 12593 clasts and matrix are closely related and from the same source, and 2) the matrix material previously documented as having a highland affinity has a lower modeled μ then KREEP.

K M Lehman Franco↗

NASA NTRSDate not supplied

New Directions in the Quest for Unaltered Ci-Like Material From the Early Solar System

CI meteorites have bulk chemical compositions closely matching the solar photosphere (except volatiles) and thus are considered to represent the starting composition of the Solar System. The return of CI-like samples from asteroid (162173) Ryugu by Hayabusa2 has greatly bolstered studies of CI. However, both CI and the Ryugu samples are CI1, i.e., they were extensively altered by aqueous fluids on their parent bodies so the mineralogy, textures, and oxygen isotope compositions of their CI3 precursors have been obscured. Fortunately, they contain rare remnants of primordial minerals in the form of small anhydrous silicate and Ca-Al-rich grains, and detailed petrologic and isotopic studies of these grains have helped elucidate the nature of their precursors. Here, we continue our work on petrologic and isotopic studies of such phases in Ryugu particle C0137.

C A Goodrich↗