Engineering topics

Taff, L. G.

Publications and source records attributed to Taff, L. G..

At least 19 records

NASA NTRS1998

Analyzing Space-Based Interferometric Measurements of Stars and Network Measurements of Gamma-Ray Bursts

Since the announcement of the discovery of sources of bursts of gamma-ray radiation in 1973, hundreds more reports of such bursts have now been published. Numerous artificial satellites have been equipped with gamma-ray detectors including the very successful Compton Gamma Ray Observatory BATSE instrument. Unfortunately, we have made no progress in identifying the source(s) of this high energy radiation. We suspected that this was a consequence of the method used to define gamma-ray burst source "error boxes." An alternative procedure to compute gamma-ray burst source positions, with a purely physical underpinning, was proposed in 1988 by Taff. Since then we have also made significant progress in understanding the analytical nature of the triangulation problem and in computing actual gamma-ray burst positions and their corresponding error boxes. For the former, we can now mathematically illustrate the crucial role of the area occupied by the detectors, while for the latter, the Atteia et al. (1987) catalog has been completely re-reduced. There are very few discrepancies in locations between our results and those of the customary "time difference of arrival" procedure. Thus, we have numerically demonstrated that the end result, for the positions, of these two very different-looking procedures is the same. Finally, for the first time, we provide a sample of realistic "error boxes" whose non-simple shapes vividly portray the difficulty of burst source localization.

Taff, L. G.↗

NASA NTRS1997

Sub-Plate Overlap Code Documentation

An expansion of the plate overlap method of astrometric data reduction to a single plate has been proposed and successfully tested. Each plate is (artificially) divided into sub-plates which can then be overlapped. This reduces the area of a 'plate' over which a plate model needs to accurately represent the relationship between measured coordinates and standard coordinates. Application is made to non-astrographic plates such as Schmidt plates and to wide-field astrographic plates. Indeed, the method is completely general and can be applied to any type of recording media.

Taff, L. G.↗

NASA NTRS1994

The analysis of star catalogs. 1: An intercomparison among the FK3, the FK4, and the FK5

Progress in the construction of the fundamental catalogs allows one to ask the following questions: 'Now that we have the FK5 with which to measure by, how good was the FK4? The FK3? How realistic were the error estimates they gave for their equatorial coordinates and their proper motions? Have their residual systematic differences continued to decrease in amplitude?' and so forth. Similar questions could be asked of the GC and the N30, and a companion paper will similarly analyze them. Finally, the identical series of questions could be asked of the AGK2, AGK3, AGK3U sequence. In this paper we develop a general method to objectively investigate, post facto, the true quality of star catalog error estimates. We present a complete mathematical formulation of the questions above and delineate the calculations needed to address them. Our initial numerical applications are restricted to a straightforward examination of the mean errors of the coordinates and proper motions in the FK3 (using the FK4 and the FK5 for comparison) and in the FK4 (using the FK5 for comparison). However, we can simply and consistently interpret the results of these computations -- for the FK catalogs fail to follow the predictions of mathematical statistics -- only if the FK3 and the FK4 contain higher angular frequency systematic errors. These errors, at the mean epochs of place of the older catalogs, are larger than the random errors in the FK5 system. We expect that our new ability to discern these features means that we can also prevent them during compilation. Finally, note that the concepts behind our procedures are completely general and can be applied to any set of compiled data -- astrometric, photometric, geodetic, and so forth.

Bucciarelli, B.↗

NASA NTRS1994

The analysis of star catalogs. 2: An intercomparison among the GC, the N30, and the FK5(B1950.0/FK4)

We use the general method of compiled data set analysis developed in our first paper (Bucciarelli et. al. 1994) and extend our analysis of fundamental star catalogs to include the two American ones. The problems found in the FK3/FK4/FK5 sequence are not present in either the GC or the N30. This lends support to the hypothesis advanced in our previous paper that the FK3, and to a lesser extent the FK4 declination system, are distorted by high angular frequency systematics. On the other hand, both the GC and N30 equatorial coordinate and proper motion distributions nicely follow the predictions of mathematical statistics. As with the FK3/FK4/FK5 analysis, the new results are as seen by the FK5 (on the FK4/B1950.0 system).

Taff, L. G.↗

NASA NTRS1994

Hubble Space Telescope Fine Guidance Sensor interferometric observations of the core of 30 doradus

We present the results of the first high angular resolution observations taken with a Fine Guidance Sensor (FGS) aboard the Hubble Space Telescope (HST) of a star cluster embedded in very bright background. The strong and complex background around the R136 cluster in the 30 Dor nebula does not prevent the FGS from achieving performance close to its angular resolution limit of approximately 0.015 sec per axis with reliable photometry. These FGS observations establish that the central object in R136a is a triple star with the third component delta V = 1.1 mag fainter than the primary star al approximately 0.08 sec way. We estimate from the grid of models of Maeder (1990) that the present mass of al is between 30 and 80 solar masses, with the main-sequence progenitor between 60 and 120 solar masses.

Lattanzi, M. G.↗

NASA NTRS1994

The photometric properties of the HST astrometer Fine Guidance Sensor

This paper presents the results of the photometric calibration of the F583W filter in the astrometer Fine Guidance Sensor on the Hubble Space Telescope. Dozens of observations of the 9.58 mag Fine Guidance Sensor (FGS) transfer mode reference star Upgren 69 (in the cluster NGC 188) have been utilized to verify the consistency and demonstrate the temporal stability of the photomultipliers. The measurements which provided the material for a transformation from the FGS instrumental system to the Johnson V magnitude consisted of the extensive position mode observations performed during the Optical Field Angle Distortion calibration. A total of 588 measurements of 92 stars in the galactic cluster M35 were performed. Johnson V band photometry with a precision (i.e., random errors) of plus or minus 0.05 mag is available with an accuracy (i.e., systematic errors) of 0.05 mag over 2 yr.

Bucciarelli, B.↗

NASA NTRS1993

The FK5 Extension on the FK4 system

This paper reports on the computations necessary to place the FK5 Extension (epoch of place B1950.0) on the B1950.0/FK4 system from its published form and the availability of this version of the catalog. An application of the utility of the new version of the FK5 Extension, to the AGK3U, is given too. This confirms both the system of the AGK3U and the estimated values of its equatorial coordinate and proper motion mean errors. In addition, we have fully exploited the flexibility of the method of infinitely overlapping circles to compute a mean epoch of place/FK4 version of the FK5 Extension which we also make available. These modifications include taking into account the changes induced by the new system of general precession constants, adjusting for the e-terms of aberration, correcting for both the FK5/FK4 equinox offset and motion, and the FK5/FK4 positional and the proper motion systematic differences.

Lattanzi, M. G.↗

NASA NTRS1992

Catalog-to-catalog reductions - Results for the FK, N30, and GC catalogs

It is shown that previous computations of catalog-to-catalog differences, whether by the bin-and-average method or by least-squares adjustment combined with an expansion in an incomplete set of basis functions, have all been performed at inappropriate epoch(s) of place. As a consequence, such results are frequently much more informative regarding the systematic differences between the proper motion systems than they are with respect to the systematic differences between the positional systems. Moreover, and for the same reason, some sets of proper motion differences really do not portray the true state of the evolution of the proper motion systems. Finally, this has practical effects in other astrometrical work, for instance, in the analysis of earth rotation time series. This error is corrected by arguing for a more meaningful epoch of place for catalog-to-catalog comparisons. This method of infinitely overlapping circles is applied at these other epochs to the FK sequence of catalogs, the N30, and the GC, and as a corollary the effectiveness of this new technique is shown.

Taff, L. G.↗

NASA NTRS1992

An analysis of the Hubble Space Telescope fine guidance sensor Fine Lock mode

There are two guiding modes of the Hubble Space Telescope used for the acquisition of astronomical data by one of its six scientific instruments. The more precise one is called Fine Lock. Command and control problems in the on-board electronics, compounded by the aberrations in the main optics, has limited routinely successful Fine Lock to brighter stars, V less than 13.0 mag, instead of fulfilling its prelaunch goal of V = 14.5 mag. Consequently, the less precise guiding mode of Coarse Track (about 25 milliarcsecond in practice) has to be used fairly frequently. Indeed, almost half of the celestial hemisphere has stars too faint to support guidance in the Fine Lock mode. Hence, some of the scientific observations to have been made with the Hubble Space Telescope will be compromised. In this paper a report on the only realistic or extensive simulations of the Fine Lock guidance mode is presented. The theoretical analysis underlying the Monte Carlo experiments and the numerical computations show that the control electronics have significant limitations and how to adjust the various control parameters in an attempt to extend Fine Lock guiding performance back to V - 14.0 mag.

Taff, L. G.↗

NASA NTRS1992

The AGK3U - An updated version of the AGK3

An account is given of an updated AGK3 with improved proper motions derived from the Palomar 'Quick V' survey. It is judged that the astrometric potential of large-scale Schmidt plates can be realized via the subplate technique, followed by integration with the results of classical photographic astrometry. The new proper motions have a total 2D mean error of 0.82 arcsec/cy. Extensive quality-assurance double-checking has been performed at each stage of this work.

Bucciarelli, B.↗

NASA NTRS1992

Gamma ray burst astrometry 2: Numerical tests

Since the announcement of the discovery of sources of gamma ray radiation in 1973, many more reports of such bursts have been published. Numerous artificial satellites have been equipped with gamma ray detectors including GRO. Unfortunately, almost no progress has been made in identifying the sources of this high energy radiation. Only one visible counterpart is known. It is suspected that this is a consequence of the methods currently used to define gamma ray burst source 'error boxes'. An alternative procedure was proposed in 1988 by Taff. Herein, Monte Carlo simulations are reported of the efficacy of this technique using realistic burst timing uncertainties and satellite location errors as well as a variety of satellite constellations. Since these are controlled numerical experiments, the dependence is examined of the statistics of the errors in the deduced burst wavefront normal as a function of the timing inconsistencies, detector location standard deviations, and especially the number and distribution of the detectors. The results clearly show that an arc minute prediction of a unique burst location is routinely obtainable once there are at least two interplanetary detectors.

Taff, L. G.↗

NASA NTRS1992

Gamma-ray burst astrometry III - More results

In continuation of previous work, new computations are presented for the PVO/Ulysses/GRO/GRANAT case. Since timing errors dominate this problem, error distributions are computed analytically for the source position direction cosines. Taff's method is shown to be numerically robust, accurate, and analytically convenient.

Taff, L. G.↗

NASA NTRS1991

An analysis of the Hubble Space Telescope fine guidance sensor fine lock mode

There are two guiding modes of the Hubble Space Telescope (HST) used for the acquisition of astronomical data by one of its six scientific instruments. The more precise one is called Fine Lock. Command and control problems in the onboard electronics has limited Fine Lock to brighter stars, V less than 13.0 mag, instead of fulfilling its goal of V = 14.5 mag. Consequently, the less precise guiding mode of Coarse Track (approximately 40 milli-arc seconds) has to be used fairly frequently. Indeed, almost half of the scientific observations to have been made with the HST will be compromised. The only realistic or extensive simulations of the Fine Lock guidance mode are reported. The theoretical analysis underlying the Monte Carlo experiments and the numerical computations clearly show both that the control electronics are severely under-engineered and how to adjust the various control parameters to successfully extend Fine Lock guiding performance back to V = 14.0 mag and sometimes beyond.

Taff, L. G.↗

NASA NTRS1991

Scientific results from the Hubble Space Telescope Fine Guidance Sensors

The Fine Guidance Sensors of the Hubble Space Telescope have two roles to play. They are the ultimate pointing and control instruments onboard the spacecraft and they are the primary astrometric instruments of the observatory. Because they are used for every scientific observation with the Hubble Space Telescope, independently of the ultimate scientific instrument being utilized, there is much more experience with them than with any of the other scientific devices. The Fine Guidance Sensors have already serendipitously discovered their first binary star from the Hubble Space Telescope Guide Star Catalog, have been exercised in most of their observing modes, and are able to fulfill their pointing and control functions up to their original specifications (in the absence of external influences). In addition, the imperfections in the primary mirror have minimally affected the performance of the Fine Guidance Sensors. An up-to-date summary of FGS engineering and science will be presented.

Taff, L. G.↗

NASA NTRS1991

Observations of space debris

Optical observations of near Earth and deep-space debris conducted at M.I.T.'s artificial satellite observatory will be discussed. A brief review of observing technique, regions of high debris density, and amount of debris in orbit will be given. The unique, duplex facilities of the observatory allow the discrimination of debris from meteors, the construction of an orbital element set, and real-time identification of catalogued artificial satellites. Near-Earth debris is present in large numbers in all the popular near-Earth orbits; at least 5-6 times the 5000-6000 objects in the NORAD catalog. In deep-space, the new presence of Ariane-related debris adds significantly to the existing population which is treble that catalogued by NORAD.

Taff, L. G.↗

NASA NTRS1989

Ariane-related debris in deep-space orbit

A group of data bases for deep-space artificial satellites has been analyzed for orbital element sets exhibiting mean motions within 1.5 rev/day of 2.2 rev/day, eccentricity within 0.3 of 0.73, and inclination within 3 deg of 6.2 deg, as would be expected of Ariane upper stage explosion debris. The rapid growth of objects in these Ariane-type orbits is consistent with the two recorded explosions of Ariane launch vehicle upper stage elements. About 250 objects are currently being tracked.

Taff, L. G.↗

NASA NTRS1986

A search for Earth-approaching asteroids

New automated methods were developed for the detection and discrimination of Earth-approaching asteriods. Specifically, utilizing state-of-the-art, electron-bombarded, silicon diode, beam scanned, low light level television cameras and the most advanced video processing equipment available. The improvement of the limiting magnitude for a 50% probability of detection, increase the areal search rate, and minimize the burden on humans of the search effort. To this end, three increasingly automated and sophisticated versions of the data acquisition, storage, and processing systems, were designed and implemented. The celestial sphere were searched for Earth-approaching minor planets. An example of this effort is the recent cataloging of 1982 HS=3343 VNEDZEL. This particular high eccentricity, high inclination object is of a type even more rare than are Earth-approaching asteriods. Several of these were found.

Taff, L. G.↗

NASA NTRS1986

Satellite debris - Recent measurements

More frequent reports concerning orbital debris damage to spacecraft have prompted the design, development and testing of equipment and techniques for the observation of moving objects by passive optical means. A consolidation is presently made of hundreds of hours of space debris observation, quantifying the numbers of small bodies in space relative to the actively watched artificial satellite population and estimating the numbers of detectable objects from near-earth orbit to geostationary orbit distances. The debris reported constitutes 11 times the tracked population in near-earth orbit and between 25 and 50 percent of the deep space population.

Taff, L. G.↗