Search NASA⌕ Search

Engineering topics

Taft, Jeffrey D.

Publications and source records attributed to Taft, Jeffrey D..

At least 19 records

Methods and systems for evaluating data transportability in distribution grids

This document describes systems and techniques for evaluating and improving distribution-grid data transportability. These systems and techniques allow engineers to quantify the data transportability of a communication system within or connected to a distribution grid, which represents an ability to transport in real-time telemetry from source locations (e.g., sensors in the distribution grid) to control mechanisms. Distribution engineers can use the sensor readings to perform grid analytics, control operating parameters, and operate protection systems. Distribution engineers can also use the transportability of the communication system to evaluate the observability of the distribution grid, which represents an ability to combine actual measurements and various types of computations (e.g., analytics, estimators, forecasters) from a system model. Distribution engineers can then generate a sensor allocation plan that indicates the number and location of sensors to maximize observability for a fixed sensor cost and/or minimize sensor cost for predetermined observability.

Taft, Jeffrey D.↗

Analysis of Distributed Energy Storage as a Core Grid Infrastructure via Production Cost Modeling

Energy storage plays a pivotal role in enabling power system operation with more flexibility and resilience. Unlike current practice that considers energy storages as attached ancillary devices, this paper focuses on storages as a core infrastructure by looking at their spatial distribution in the system. A sensitivity analysis based on production cost modeling is conducted to demonstrate the benefits of distributed energy storages. First, the modeling of energy storages in production cost modeling is presented. Second, potential optimal locations of distributed energy storages in a power system are discussed. Finally, multiple scenarios with various numbers and locations of additional distributed energy storages in the WECC 2030 model are created. The production cost modeling results of these scenarios show that distributed energy storages have higher utilization compared to the centralized ES units and therefore provide significantly more benefits in terms of reduction in generation cost, emission cost, and volatility of location marginal prices. A saturation effect is observed suggesting the selection of optimal locations will further improve the benefits.

Nguyen, Quan H.↗

Methods and systems for evaluating and improving distribution-grid observability

This document describes systems and techniques for evaluating and improving distribution-grid observability. These systems and techniques allow engineers to quantify the observability of a distribution grid, which represents an ability to combine actual measurements and various types of computations (e.g., analytics, estimators, forecasters), from a system model. Distribution engineers can also identify islands of observability where operating parameters, including voltages, currents, and power flows, can be determined from available sensor readings. By exclusion, distribution engineers can similarly identify areas of the distribution grid with observability deficiencies that may require additional instrumentation to maintain proper operation. Distribution engineers, using an iterative or automated process, can determine the observability of the system model with new or relocated sensors to generate a sensor allocation plan. The sensor allocation plan can indicate the number and location of sensors to either maximize observability for a fixed sensor cost or minimize sensor cost for predetermined observability.

Reiman, Anthony P.↗

Emerging Trends and Systemic Issues Influencing Today’s U.S. Electric Grid

With increasing shifts from vertically integrated to horizontally structured operations and from centralized to distributed electric power delivery, today’s electric power grid (the “grid”) operators and designers face the challenge of creating an architecture that accommodates a host of diverse requirements. The grid’s modes of operation must address concerns of reliability and stability, new deployments of renewable energy sources, threats from cyber-attacks and natural disasters, and increasingly distributed system operations. Grid modernization calls for a reliable, affordable, sustainable, agile, secure, and resilient grid. However, the modernization of the U.S. power grid is hampered by mounting complexity and diverging objectives from owners and operators and is consequently risky and fraught with potential missteps. Flawed architecture, design, and implementation will lead to stranded investments and lost opportunities. A principled approach to minimize risk and develop a robust grid of the future is to begin with a sound architecture for the grid to inform the design process. Architecture development starts with the context of influencing factors that provide constraints as well as driving goals. This report provides the context of emerging trends and cross-cutting systemic issues in the U.S. electric power grid and serves as a vital input for grid architecture development.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Grid Architecture Guidance Specification for FAST-DERMS (V.1.0)

This document provides grid architecture guidance to support the Grid Modernization Laboratory Consortium (GMLC) Federated Architecture for Secure and Transactive Distributed Energy Resource Management Solution (FAST-DERMS) project. The FAST-DERMS project seeks to develop an architecture and reference implementation solution that enables the provision of reliable, resilient, and secure transmission and distribution (T&D) grid services through the scalable aggregation and near-real-time management of utility-scale and small-scale distributed energy resources (DERs).

24 POWER TRANSMISSION AND DISTRIBUTION↗

Regulatory Implications of Embedded Grid Energy Storage

Electricity is unique among commodities in that its supply chain was developed without a storage component. Every other resource commodity has the ability to store excess quantities built into its supply chain – in the form of granaries, warehouses, reservoirs, etc. This embedded storage creates a buffer for mismatches between supply and demand, stabilizing prices and protecting customers. Recent technological advances in cost-competitive energy storage technologies that are scalable and flexible have made the concept of embedded electrical storage feasible, but several regulatory questions remain. This paper summarizes energy regulatory structures in the U.S. and the implications that they would have for embedded storage on the electric grid. Regulatory challenges for embedded storage include the lack of underlying standards, inclusion in planning processes, ownership models, compensation, and metrics. Two possible pathways forward are explored: an incremental one including regulatory guidance regarding the evaluation of embedded storage in existing planning processes, and a complex one involving the revision of existing reliability standards or the development of a new standard specific to embedded storage.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Electric Distribution System Planning with DERs - High-level Assessment of Tools and Methods

This document addresses analytical tools and methods to support electric distribution system planning with distributed energy resources (DERs) and grid modernization, drawing on leading-edge research and examples from around the United States. In this report, tools include computer models and software, as well as other analytical aids and practices that support distribution system planning. At its core, distribution system planning is about supporting investment decisions. Enhanced and integrated distribution system planning allows utilities to move from a passive reactive role to smart proactive planning with respect to DERs. Distribution system planning can increase transparency around utility distribution system investments before they are brought to the regulatory body for cost recovery, can support deferring traditional infrastructure investments, and can provide information and incentives to customers and third parties about where DERs can help the grid. A growing number of states are beginning to consider a comprehensive distribution system planning process that addresses the costs and benefits of DERs, reflects more choices coming from the customer/third-party domains, is integrated with resource and transmission planning, and incorporates planning scenarios that reflect the dynamic and changing nature of the electricity system

24 POWER TRANSMISSION AND DISTRIBUTION↗

Connectivity, Centrality, and Bottleneckedness: On Graph Theoretic Methods for Power Systems

This report provides an introduction to selected graph theoretic topics with pertinence to the structural analysis of electric power grid and communication systems. We focus on methodologies for defining, scoring, and identifying connectivity, spectral, and bottleneckeness properties in graphs, as well as vertex and edge importance measures such as centrality. We apply these measures to power systems and communications graph data, discuss and visualize the results, and comment on computational aspects of these methods. We show that graph theoretic methods can provide useful insights into grid and communication network structure, leading to tools and methods that could be used by electric utility engineers to improve key grid and communication network characteristics, such as resilience and scalability.

24 POWER TRANSMISSION AND DISTRIBUTION↗

The Use of Embedded Electric Grid Storage for Resilience, Operational Flexibility, and Cyber-Security

In recent years, bulk energy storage has been applied to electric power systems as an auxiliary device for the support of grid reliability via grid services. This approach is useful but only extracts value from storage on a marginal basis because grid services involve only a tiny fraction of the power flowing in a grid. While storage is flexible enough to perform many services, assessing its value on a stacked-services basis obscures its real value: storage is a buffer for electric energy flows. All of its capabilities stem from this one fundamental property. Limiting storage to use as an ancillary services device leaves this primary value untapped. The real value of storage is as a means to provide a key characteristic missing from power grids: the ability to absorb stresses with little or no loss of performance – the essence of resilience. Storage applied systematically throughout the grid can provide the missing “shock absorber” springiness that the grid is missing. To provide this value, storage must be incorporated into the grid as core infrastructure and must be deeply integrated into grid operations. Doing so will provide far-reaching benefits to users of electricity at all levels, including vastly increased system resilience, expanded system operational flexibility, support for critical lifeline functions during critical events, and even improved cyber security.

25 ENERGY STORAGE↗

Grid Architecture: A Core Discipline for Grid Modernization

Grid Architecture not only provides valuable new insights into grid modernization planning and design, but also provides the means to future-proof technological investments and to reduce integration costs – two issues that concern regulators and utility executives alike. Proper structure creates intrinsic grid characteristics that bolster resilience, capability, and affordability, and help safeguard investments by limiting change effects. Well-planned grid structure simplifies downstream decisions and frees up architects and engineers working on individual components or systems to employ creativity with assurance that unintended consequences will not crop up to hamper or even invalidate their work. For these reasons, it is not just important, but crucial, that the structural issues addressed by Grid Architecture be considered before other aspects of grid modernization are undertaken.

grid modernization, gmlc, DER, distribution automa↗

Next-Gen Grid Architecture Part 3: A peek into industry structure

This article summarizes the process for developing Industry Structure Diagrams and then provides examples of their application to illustrative electric power industry problems. This is the third in a series of articles on Grid Architecture prepared for Electric Light and Power.

Grid Architecture, industry structure, Grid Modern↗

Assessment of Existing Synchrophasor Networks (Final, Version 0.5)

In 2007-09, DOE worked with NASPI to fund the development of an architecture framework for synchrophasor data networks. That “NASPInet” framework has been the prevailing guidance since that time, and various NASPInet elements were incorporated and tested in several of the SGIG synchrophasor projects. But the NASPInet framework is now outdated; synchrophasor technology has evolved; data volumes are increasing exponentially, and networking technology changes markedly every year. Many of the NASPInet design concepts remain useful, but implementations have fallen short; the NASPInet architecture must be sharpened and projected forward in terms of technology capability to enable the design and deployment of the next generation of synchrophasor data networks. The NASPInet 2.0 project is intended to update the NASPInet framework to address the new technology opportunities and needs for synchrophasor data networks. The main objectives of this project are to assess existing synchrophasor data networks, evaluate current and future networking technologies and synchrophasor network needs, perform a gap analysis, and recommend a path forward and specific technology and design recommendations for the next generation of synchrophasor data networks (henceforth to be called NASPInet 2.0).

97 MATHEMATICS AND COMPUTING↗

Electric Grid Resilience and Reliability for Grid Architecture

Grid modernization activities cite resilience (sometimes called resiliency) as a key electric power grid characteristic to be improved or maximized, and so it is crucial for the development of resilient grid architectures that the concept of grid resilience be clear and quantifiable. However, attempts to define and quantify a concept of resilience for electric power grids have mostly relied upon ad hoc definitions that do not have much underlying rigor and are often closely tied to reliability, sometimes only differing in terms of scale and frequency of events. While grid reliability would seem to have strong definition given the IEEE 1366 standard, grid resilience is a term that is less clear.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Distribution Storage Networks (Draft Version 0.3)

Distribution storage networks are interconnected distribution-level bulk energy storage devices that function as core infrastructure elements to provide both grid resilience and defense against IoT-based cyber grid security threats. The recognition that these are core grid functions changes how storage of this type valued, financed, and operated as compared to storage for ancillary grid services. Distribution storage networks make use of fast bilateral storage to buffer the grid from edge device-based volatilities; this is the essence of both its resilience capability and its cyber defense capability. These storage networks must be core grid components because resilience is an intrinsic grid characteristic and both it and cyber defense of the distribution grid are the responsibility of the distribution utility.

97 MATHEMATICS AND COMPUTING↗

Electric Grid Market-Control Structure

Markets and controls are frequently portrayed as being polar opposites, incompatible alternative paradigms, or even competing philosophies for organizing the activities of large complex systems. In the electricity industry in the US prior to the 1990s, the dominant organizational structure was the vertically-integrated utility, characterized by a well-defined geographic and electrical service territory and the ownership or control of most generating facilities, a transmission network, local distribution systems and a monopoly over retail electric service for most if not all of the end-users in the territory. A vertically-integrated utility, many of which still exist today, operates mostly on controls with very little scope for markets or market transactions.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Roles and Responsibilities for Distribution Grids: DER Sensing and Communication Networks

Traditional distribution grids require sensing and communications for grid operations. In many cases the communications networks are owned by the Distribution Operator (DO); in some cases, carrier services such as leased telephone land lines or cellular services are used. In recent years, wireless mesh field area networks and optical fiber have become viable options for distribution. Fiber in particular has improved in cost to the point where its high performance (large bandwidth, low latency, and low packet loss) has become practical for distribution systems where geographic circumstances permit. As grid modernization proceeds, utilities find a need to improve or upgrade distribution communications; this represents a significant investment and it is natural that both utilities and regulators would seek both to future-proof and minimize their costs. Given the development and rising penetration of smart grid edge devices such as Distributed Energy Resources (DER) that have local sensing and intelligence and can communicate via the internet or other non-utility communications channels to cloud-based services, the idea of using such devices for grid sensing and communications to support grid operations has emerged as a potential means to avoid utility investment. To a great extent, however, these DER and communication channels will be owned and operated not by the DO but by end-use customers, aggregators and other third parties pursuing their own energy needs and business models. The question of whether such devices and systems can effectively substitute for DO grid modernization investment can be assessed and resolved using grid architecture methods and by considering the appropriate roles and responsibilities of the entities and systems involved in distribution grid operations. This approach reveals that there are several compelling reasons to dismiss the idea of eliminating DO owned and operated sensing and communication entirely and relying on DER-based sensing and third party communications.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Comparative Architecture Analysis: Using Laminar Structure to Unify Multiple Grid Architectures

A great many architectures for various aspects of electric grids have been proposed over recent years and new ones continue to be suggested. Generally speaking, there is no means except ad hoc analysis by which one can reduce these architectures to some common basis, or extract common elements. This leads to confusion in choosing an architecture for implementation, as well as making it difficult to identify core product or platform opportunities with sufficient potential markets to encourage vendors to provide or develop them. The discipline of Grid Architecture as defined for the US Department of Energy (DOE) in 2014 has multiple purposes. Among them are two that are relevant here: Providing rigorous bases for architectural structures and Identifying common aspects of apparently divergent architectural structures. For the first of these, mathematical methods are applied where possible to provide the rigorous basis for structure. For the second, mapping of architectural structures to a canonical structure puts apparently disparate architectures onto a common basis. In the best case, these two methods coincide. In this paper, Laminar Coordination structure serves as the rigorously defined common basis for analysis of several real and proposed grid architectures.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Architectural Basis for Highly Distributed Transactive Power Grids: Frameworks, Networks, and Grid Codes

This paper provides an architectural framework for highly distributed Transactive Energy grids. This framework guides the engineering of transactive distribution systems, informs the necessary interoperability standards, and fills in the gap in the ability of electric distribution utilities to write the Grid Codes that define how prosumer and third party devices plug into such a grid. With this architecture, a major hurdle to Transactive Grid deployment is resolved.

24 POWER TRANSMISSION AND DISTRIBUTION↗