Engineering topics

Tala, T.

Publications and source records attributed to Tala, T..

8 records

DOE OSTI2024

Overview of the KSTAR experiments toward fusion reactor

The Korean Superconducting Tokamak Advanced Research has been focused on exploring the key physics and engineering issues for future fusion reactors by demonstrating the long pulse operation of high beta steady-state discharge. Advanced scenarios are being developed with the goal for steady-state operation, and significant progress has been made in high ℓ i , hybrid and high beta scenarios with β N of 3. In the new operation scenario called fast ion regulated enhanced (FIRE), fast ions play an essential role in confinement enhancement. GK simulations show a significant reduction of the thermal energy flux when the thermal ion fraction decreases and the main ion density gradient is reversed by the fast ions in FIRE mode. Optimization of 3D magnetic field techniques, including adaptive control and real-time machine learning control algorithm, enabled long-pulse operation and high-performance ELM-suppressed discharge. Symmetric multiple shattered pellet injections (SPIs) and real-time disruption event characterization and forecasting are being performed to mitigate and avoid the disruptions associated with high-performance, long-pulse ITER-like scenarios. Finally, the near-term research plan will be addressed with the actively cooled tungsten divertor, a major upgrade of the NBI and helicon current drive heating, and transition to a full metallic wall.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Helium plasma operations on ASDEX Upgrade and JET in support of the non-nuclear phases of ITER

For its initial operational phase, ITER has until recently considered using non-nuclear hydrogen (H) or helium (He) plasmas to keep nuclear activation at low levels. To this end, the Tokamak Exploitation Task Force of the EUROfusion Consortium carried out dedicated experimental campaigns in He on the ASDEX Upgrade (AUG) and JET tokamaks in 2022, with particular emphasis put on the ELMy H-mode operation and plasma-wall interaction processes as well as comparison to H or deuterium (D) plasmas. Both in pure He and mixed He + H plasmas, H-mode operation could be reached but more effort was needed to obtain a stable plasma scenario than in H or D. Even if the power threshold for the LH transition was lower in He, entering the type-I ELMy regime appeared to require equally much or even more heating power than in H. Suppression of ELMs by resonant magnetic perturbations was studied on AUG but was only possible in plasmas with a He content below 19%; the reason for this unexpected behaviour remains still unclear and various theoretical approaches are being pursued to properly understand the physics behind ELM suppression. The erosion rates of tungsten (W) plasma-facing components were an order of magnitude larger than what has been reported in hydrogenic plasmas, which can be attributed to the prominent role of He 2+ ions in the plasma. For the first time, the formation of nanoscale structures (W fuzz) was unambiguously demonstrated in H-mode He plasmas on AUG. However, no direct evidence of fuzz creation on JET was obtained despite the main conditions for its occurrence being met. The reason could be a delicate balance between W erosion by ELMs, competition between the growth and annealing of the fuzz, and coverage of the surface with co-deposits.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Isotope mass scaling and transport comparison between JET Deuterium and Tritium L-mode plasmas

The dimensionless isotope mass scaling experiment between pure Deuterium and pure Tritium plasmas with matched $\rho^*$, $\nu^*$ , β n , q and $T_e/T_i$ has been achieved in JET L-mode with dominant electron heating (NBI+ohmic) conditions. 28% higher scaled energy confinement time $B_t\tau_{E,\mathrm{th}}/A$ is found in favour of the Tritium plasma. This can be cast in the form of the dimensionless energy confinement scaling law as $\Omega_i \tau_{E,\mathrm{th}} \sim A^{0.48 \pm 0.16}$. This significant isotope mass scaling is consequently seen in the scaled one-fluid heat diffusion coefficient $A \chi_{\mathrm{eff}}/B_t$ which is around 50% lower in the Tritium plasma throughout the whole plasma radius. The isotope mass dependence in the particle transport channel is negligible, supported also by the perturbative particle transport analysis with gas puff modulation. The comparison of the edge particle fuelling or ionisation profiles from the EDGE2D-EIRENE simulations show that the absolute density differences that are necessary for the dimensionless match in the confined plasma dominate over any isotope mass dependencies of particle fuelling and ionization profiles at the plasma edge. Local GENE simulation results indicate a mild anti-gyroBohm effect at $\rho_\mathrm{tor}$ = 0.6 and thereby a small isotope mass dependence in favour of Tritium on heat transport and a negligible effect on particle transport. A significant fraction of the isotope scaling and reduced heat transport observed in the Tritium plasma is not captured in the GENE and ASTRA-TGLF-SAT2 simulations by simply changing the isotope mass for the same input profiles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Isotope effects on transport in LHD

Abstract Isotope effects are one of the most important issues for predicting future reactor operations. Large helical device (LHD) is the presently working largest stellarator/helical device using super conducting helical coils. In LHD, deuterium experiments started in 2017. Extensive studies regarding isotope effects on transport have been carried out. In this paper, the results of isotope effect studies in LHD are reported. The systematic studies were performed adjusting operational parameters and nondimensional parameters. In L mode like normal confinement plasma, where internal and edge transport barriers are not formed, the scaling of global energy confinement time ( τ E ) with operational parameters shows positive mass dependence ( M 0.27 ; where M is effective ion mass) in electron cyclotron heating plasma and no mass dependence ( M 0.0 ) in neutral beam injection heating plasma. The non-negative ion mass dependence is anti-gyro-Bohm scaling. The role of the turbulence in isotope effects was also found by turbulence measurements and gyrokinetic simulation. Better accessibility to electron and ion internal transport barrier (ITB) plasma is found in deuterium (D) plasma than in hydrogen (H). Gyro kinetic non-linear simulation shows reduced ion heat flux due to the larger generation of zonal flow in deuterium plasma. Peaked carbon density profile plays a prominent role in reducing ion energy transport in ITB plasma. This is evident only in plasma with deuterium ions. New findings on the mixing and non-mixing states of D and H particle transports are reported. In the mixing state, ion particle diffusivities are higher than electron particle diffusivities and D and H ion density profiles are almost identical. In the non-mixing state, ion particle diffusivity is much lower than electron diffusivity. Deuterium and hydrogen ion profiles are clearly different. Different turbulence structures were found in the mixing and non-mixing states suggesting different turbulence modes play a role.

Physics↗

DOE OSTI2021

Dimensionless Parameter Scaling of Intrinsic Torque in C-Mod Enhanced Confinement Plasmas

A dimensionless parameter dependence study of intrinsic torque has been performed on a database of H- and I-mode plasmas from the Alcator C-Mod tokamak. The torque was determined by comparing intrinsic angular momentum density profiles just before and just after L-H and L-I transitions. The intrinsic torque has been found to scale as beta_N^1.5 rho_*^-1.0 nu_$^0.1, with the parameter ranges 0.3 < beta_N <1.5, 0.004 < rho_* < 0.011 and 0.04 < nu_* < 0.9. Comparison with results from other tokamaks suggests that the intrinsic torque should be normalized by some measure of the device size.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Dimensionless parameter scaling of intrinsic torque in C-Mod enhanced confinement plasmas

A dimensionless parameter dependence study of intrinsic torque has been performed on a database of H- and I-mode plasmas from the Alcator C-Mod tokamak. Here, the torque was determined by comparing intrinsic angular momentum density profiles just before and just after L–H and L–I transitions. The intrinsic torque has been found to scale as ${\beta }_{N}^{ 1.5}\enspace {\rho }_{{\ast}}^{-1.0}\enspace {\nu }_{{\ast}}^{0.1}$, with the parameter ranges 0.3 $\leqslant$ β N $\leqslant$ 1.5, 0.004 $\leqslant$ ρ* $\leqslant$ 0.011 and 0.04 $\leqslant$ ν * $\leqslant$ 0.9. Comparison with results from JET and DIII-D suggests that the intrinsic torque should be normalized by some measure of the device size. Depending upon this normalization, the estimated total intrinsic torques for ITER, SPARC and ARC are ~20, ~4 and ~8 Nm, respectively.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Comparing particle transport in JET and DIII-D plasmas: gyrokinetic and gyrofluid modelling

The paper models the impact of fueling versus particle transport in the DIII-D and JET tokamaks. Experimentally, it was found that in JET an increase in the density peaking at lower collisionality could be attributed to an increase in core fueling, however on DIII-D, the opposite was observed. In DIII-D, the increase in density peaking was the result of an increase in inward transport, not an increase in core fueling. The paper shows that the difference in temperature gradients and thus turbulence dynamics between the two experiments can explain the experimentally observed discrepancy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Collisionality driven turbulent particle transport changes in DIII-D H-mode plasmas

The results of the experimental dimensionless scan in this paper confirm that there is an increase in density peaking towards lower collisionality and that this can be partly linked to a shift in the turbulence regime from ITG towards TEM. However at the lowest collisionality, the changes in turbulence and transport are much more pronounced than expected from direct collisionality effect on the turbulence. In this paper, the collisionality, ν * is varied by a factor 5, while keeping ρ * , q , β , M , fixed. Additionally, a 3 Hz gas puff modulation is applied to modulate the electron density profile and extract the perturbed transport coefficients using two diagnostics. The transport analysis shows that the increase in density peaking at low ν * is linked to an increase in the inward particle pinch and not an increase in core fueling. These observations are not only in agreement with prior modeling scans of how turbulence changes as a function of collisionality and its impact upon the particle fluxes, but also with the multi-machine database (Fable E. et al 2010 Plasma Phys. Control. Fusion 52 015007) (Angioni C. et al 2003 Phys. Rev. Lett. 90 205003). The changes in turbulence across the collisionality scan were captured at large scale by the BES and at smaller scale by the DBS. A comparison with gradient-driven GENE simulations showed similar trends at both scales. Moreover, the changes observed in overall transport are in agreement with gradient-driven TGLF particle flux simulations. This indicates that TGLF/GENE when given the gradients as input, are able to reproduce the experimentally observed turbulence changes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗