Realization of a Photoelectrochemical Cascade for the Generation of Methanol: A Liquid Solar Fuel
Not Available
3-terminal tandems↗
Engineering topics
Tamboli, Adele C.
Publications and source records attributed to Tamboli, Adele C..
Transparent Conductive Encapsulants for Photoelectrochemical Applications
Utilizing sunlight to directly perform photoelectrochemical reactions is a promising route to renewable, net carbon-neutral fuels. However, a common problem with solar fuel production is semiconductor degradation in aqueous environments. An ideal protection layer should (1) prevent solution from reaching the semiconductor, (2) maintain charge transfer to and from solution, and (3) be transparent to light above the semiconductor band gap. While there have been substantial advances toward layers that meet these requirements, they are not easily adapted to new surfaces or new reactions, which can make protection difficult for newly developed photoabsorbers and (photo)electrochemical reaction pairings. In this work, we demonstrate the use of transparent conductive encapsulants (TCEs) to meet these requirements while also allowing for photoelectrode- and reaction-agnostic adaptability. TCEs are composed of an ethyl-vinyl acetate matrix with embedded conductive metal-coated microspheres that can be laminated to semiconductors. First, the electrochemical behavior of TCE-coated electrodes for the reduction of methyl viologen is characterized, demonstrating through-TCE electrical conduction. Then, photoelectrochemical measurements on TCE-protected semiconductors demonstrate the flexibility of this protection scheme. Finally, long-term photoelectrochemical measurements probe the efficacy of TCEs as protection layers. These findings demonstrate the potential of TCEs as adaptable protection layers in various photoelectrochemical applications.
14 SOLAR ENERGY↗
Combinatorial Synthesis of Cation-Disordered Manganese Tin Nitride MnSnN 2 Thin Films with Magnetic and Semiconducting Properties
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Epitaxial ZnGeP 2 Thin Films on Si and GaP by Reactive Combinatorial Sputtering in Phosphine
Not Available
36 MATERIALS SCIENCE↗
A performance comparison between GaInP-on-Si and GaAs-on-Si 3-terminal tandem solar cells
The pursuit of ever-higher solar cell efficiencies has focused heavily on multijunction technologies. In tandem cells, subcells are typically either contacted via two terminals (2T) or four terminals (4T). Simulations show that the less-common three-terminal (3T) design may be comparable to 4T tandem cells in its compatibility with a range of materials, operating conditions, and methods for subcell integration, yet the 3T design circumvents shading losses of the 4T intermediate conductive layers. This study analyzes the performance of two superstrate 3T III-V-on-Si (III-V//Si) tandem cells: One has slightly greater current contribution from the Si bottom cell (GaInP//Si) and the other has substantially greater current contribution from the GaAs top cell (GaAs//Si). Our results show that both tandem cells exhibit the same efficiency (21.3%), thereby demonstrating that the third terminal allows for flexibility in the selection of the top cell material, similar to the 4T design.
14 SOLAR ENERGY↗
Zinc Titanium Nitride Semiconductor toward Durable Photoelectrochemical Applications
Not Available
30 DIRECT ENERGY CONVERSION↗
Simulation and characterization of cation disorder in ZnGeP 2
New optoelectronic materials are needed for improving the efficiency and reliability of devices such as solar cells. Cation ordering presents one means of controlling optoelectronic properties while introducing potential to also diversify the mineral constituents of electronic devices; however, the mechanisms of ordering are not yet well understood. To better understand cation ordering in a system integratable with current devices, we assess short- and long-range order parameters of ZnGeP 2 , a material closely lattice matched to Si. Structures are simulated using cluster-based Monte Carlo and first-principles calculations to compare structural distortions, periodicity, and local coordination environments in ZnGeP 2 to experimental data both from the literature and presented here. Comparing order parameters, we relate the transition in order parameters of ZnGeP 2 to that of ZnGeP 2 , discuss the reduction of band gaps with disorder, and show that traditional structural characterization alone is insufficient for understanding order in ZnGeP 2 .
14 SOLAR ENERGY↗
Composition Dependent Electrochemical Properties of Earth-Abundant Ternary Nitride Anodes
Growing energy storage demands on lithium-ion batteries necessitate exploration of new electrochemical materials as next-generation battery electrode materials. In this work, we investigate the previously unexplored electrochemical properties of earth-abundant and tunable Zn 1-x Sn 1+x N 2 (x = -0.4 to x = 0.4) thin films, which show high electrical conductivity and high gravimetric capacity for Li insertion. Enhanced cycling performance is achieved compared to previously published end-members Zn 3 N 2 and Sn 3 N 4 , showing decreased irreversible loss and increased total capacity and cycle stability. The average reversible capacity observed is >1050 mAh/g for all compositions and 1220 mAh/g for Zn-poor (x = 0.2) films. Extremely Zn-rich films (x = -0.4) show improved adhesion; however, Zn-rich films undergo a phase transformation on the first cycle. Zn-poor and stoichiometric films do not exhibit significant phase transformations which often plague nitride materials and show no required overpotential at the 0.5 V plateau. Cation composition x is explored as a mechanism for tuning relevant mechanical and electrochemical properties, such as capacity, overpotential, phase transformation, electrical conductivity, and adhesion. The lithiation/delithiation experiments confirm the reversible electrochemical reactions. Without any binding additives, the as-deposited electrodes delaminate resulting in fast capacity degradation. We demonstrate the mechanical nature of this degradation through decreased electrode thinning, resulting in cells with improved cycling stability due to increased mechanical stability. Combining composition and electrochemical analysis, this work demonstrates for the first time composition dependent electrochemical properties for the ternary Zn 1-x Sn 1+x N 2 and proposes earth-abundant ternary nitride anodes for increased reversible capacity and cycling stability.
25 ENERGY STORAGE↗
Boron Phosphide Films by Reactive Sputtering: Searching for a P‐Type Transparent Conductor
Abstract With an indirect band gap in the visible and a direct band gap at a much higher energy, boron phosphide (BP) holds promise as an unconventional p‐type transparent conductor. This work reports on reactive sputtering of amorphous BP films, their partial crystallization in a P‐containing annealing atmosphere, and extrinsic doping by C and Si. The highest hole concentration to date for p‐type BP (5 × 10 20 cm −3 ) is achieved using C doping under B‐rich conditions. Furthermore, bipolar doping is confirmed to be feasible in BP. An anneal temperature of at least 1000 °C is necessary for crystallization and dopant activation. Hole mobilities are low and indirect optical transitions are stronger than that predicted by theory. Low crystalline quality probably plays a role in both cases. High figures of merit for transparent conductors might be achievable in extrinsically doped BP films with improved crystalline quality.
36 MATERIALS SCIENCE↗
Efficient light-trapping in ultrathin GaAs solar cells using quasi-random photonic crystals
Ultrathin solar cells reduce material usage and allow the use of lower-quality materials thanks to their one order of magnitude smaller thickness than their conventional counterparts. However, efficient photonic light-trapping is required to harvest the incident light efficiently for an otherwise insufficient absorber thickness. Quasi-random photonic crystals are predicted to have high efficient light-trapping while being more robust under angle and thickness variations than simple photonic crystals. In this study, we experimentally demonstrate a light-trapping solution based on quasi-random photonic crystals fabricated by polymer blend lithography. We control the average lattice parameter by modifying the spin-coating speed. We demonstrate an ultrathin GaAs cell of 260 nm with a rear quasi-random pattern with submicron features, and a J sc = 26.4 mA/cm 2 and an efficiency of 22.35% under the global solar spectrum.
14 SOLAR ENERGY↗
Progress in three-terminal heterojunction bipolar transistor solar cells
Conventional solar cells, including multijunction solar cells, are based on pn junctions as building blocks. In contrast, the three-terminal heterojunction bipolar transistor solar cell (3T-HBTSC) explores the use of a bipolar transistor structure to build a solar cell. The limiting efficiency of this transistor structure equals that of a double-junction solar cell. However, since the 3T-HBTSC does not require tunnel junctions, its minimal structure has only three semiconductor layers, while the minimal structure of a double junction solar cell has six. This work reviews the operation principles of this solar cell and the steps carried out towards its practical implementation. Experimental results on a GaInP/GaAs HBTSC prototype with bottom interdigitated contacts are presented.
14 SOLAR ENERGY↗
Deep level transient spectroscopy and photoluminescence studies of hole and electron traps in ZnSnP 2 bulk crystals
ZnSnP 2 , an emerging inorganic material for solar cells, was characterized by deep level transient spectroscopy (DLTS) and photoluminescence (PL). Acceptor- and donor-like traps with shallow energy levels were detected by DLTS analysis. The previous study based on first-principle calculation also suggested such traps were due to antisite defects of Zn and Sn. PL measurements also revealed sub-gap transitions related to these trap levels. Furthermore, DLTS found a trap with a deep level in ZnSnP 2 . A short lifetime of minority carrier in previous work might be due to such trap, coming from phosphorus vacancies and/or zinc interstitials suggested by the first-principle study.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Heteroepitaxial ZnGeN 2 on AlN: Growth, Structure, and Optical Properties
Not Available
36 MATERIALS SCIENCE↗
Characterization of multiterminal tandem photovoltaic devices and their subcell coupling
Three-terminal (3T) and four-terminal (4T) tandem photovoltaic (PV) devices using various materials have been increasingly reported in the literature, but measurement standards are lacking. Here, multiterminal devices measured as functions of two load variables are characterized unambiguously as functions of three device voltages or currents on hexagonal plots. We demonstrate these measurement techniques using two GaInP/GaAs tandem solar cells, with a middle contact between the two subcells, as example 3T devices with both series-connected and reverse-connected subcells. Coupling mechanisms between the subcells are quantified within the context of a simple equivalent optoelectronic circuit. Electrical and optical coupling mechanisms are most clearly revealed using coupled dark measurements. These measurements are sensitive enough to observe very small luminescent coupling from the bottom subcell to the top subcell in the prototype 3T device. Quick simplified measurement techniques are also discussed within the context of the complete characterization.
14 SOLAR ENERGY↗
Reactive phosphine combinatorial co-sputtering of cation disordered ZnGeP2 films
The discovery of new materials by coupling high-throughput synthesis with computational screening is being increasingly adopted. However, thus far, phosphides have been largely overlooked for both computational screening and high-throughput synthesis. In this paper, we report on the use of a high-throughput synthesis technique, reactive combinatorial co-sputtering with PH 3 , to deposit ZnGeP 2 thin films. We grew amorphous films over a wide range of compositions and found an upper limit in growth temperature determined by Zn and P volatility. We found that depositing in a Ge-limited regime could be utilized to slow the growth rate to compensate for the desorption of the Zn and P. Crystalline films were achieved by depositing films at higher temperatures in this Ge-limited regime with a reduced deposition rate. X-ray diffraction revealed that the films had crystallized in the zinc blende, cation-disordered structure. The crystalline films exhibited optical absorption energy threshold values ranging from 0.8 to 1.3 eV. Increased Ge content was found in films that exhibited a decreased absorption onset energy. Native defect calculations were used to gain an understanding of the off-stoichiometry seen in these films. This work provides the first high-throughput investigation of ZnGeP 2 , demonstrating the ability to grow amorphous and cation disordered ZnGeP 2 over a wide range of compositions with varying optical properties.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Design principles of tandem cascade photoelectrochemical devices
Cascade photoelectrocatalysis (PEC) is a possible method to improve the selectivity of solar-driven CO 2 reduction (CO 2 R). This concept can be realized by coupling different CO 2 R catalysts to different subcells in a multijunction photovoltaic (PV) stack. Efficient implementation will require careful tuning of the photocurrents and design of the photovoltages provided by the subcells to the CO 2 R catalysts in such a way as to facilitate the target reaction. Here, we outline the design principles of the tandem PEC approach using two-step conversion of CO 2 to ethylene in aqueous electrolyte, via a CO intermediate, as a model system. To perform this reaction, the first coupled PV-catalyst component should provide 4 electrons to reduce 2 molecules of CO 2 to CO; the second component should provide 8 electrons to reduce 2 CO molecules to C 2 H 4 . Based on known CO 2 R catalysts, the overpotential required to produce CO can be less than that required to reduce it to ethylene, creating the opportunity for improved efficiency. Cascade PEC can be realized in a three-terminal tandem (3TT) configuration using III–V-semiconductor based subcells coupled to Au (produces CO intermediate) and Cu (converts CO to ethylene). The current to each catalyst can be controlled by the area of the subcell exposed to the electrolyte, and the photovoltage is determined by the materials selected and device configuration. Operating conditions are found by simulating the coupled system using the open-source circuit simulator SPICE (Simulation Program with Integrated Circuits Emphasis). We identify conditions under which a 3TT configuration can have a higher solar to chemical conversion efficiency compared to a two-terminal two-junction tandem (2T 2J) with the same absorbers and a Cu catalyst only. We also show that 3TT PEC devices can be less sensitive to variations in catalyst activity compared to 2T devices. Lastly, we discuss the applications of cascade PEC to CO 2 reduction, using different intermediates, and to other chemical networks.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗