Engineering topics

Tan, Eric D.

Publications and source records attributed to Tan, Eric D..

4 records

DOE OSTI2024

Solid–liquid separation of lignocellulosic sugars from biomass by rotating ceramic disc filtration

In many biomass conversion processes, the separation of cellulosic sugars from residual, lignin-rich solids is a critical step, and achieving high recovery yields of sugars by conventional tangential crossflow and vacuum filtration is challenged by the presence of biomass solids, which rapidly foul filters, resulting in decreased throughput. Considering the performance limitations of traditional filtration methods, dynamic filtration, which generates high shear at the membrane surface to decrease fouling, is emerging as a viable alternative for demanding solid–liquid separations. For high solids separations, there is little available information regarding the performance, limitations, and energy consumption of dynamic filtration. To that end, here we characterized the performance of a dynamic filtration module, specifically a rotating ceramic disc (RCD) filter, for the aseptic recovery of cellulosic sugars from biomass solids following pretreatment and enzymatic hydrolysis. We show how RCD rotational velocity and percent biomass solids impact the filter throughput. Additionally, we used computational fluid dynamics (CFD) simulations to estimate the shear rate at the membrane surface and to visualize hydrodynamic profiles within the module. With the combined CFD simulations and experimental results, we estimated the energy demand and operating expenses for a viable dynamic filtration system operating with a lignocellulosic feed slurry. Our results indicate that an RCD filter can achieve ≥95% recovery of sugars and produce a retentate slurry containing 12 wt% insoluble solids with low energy consumption (a 2.2-fold improvement over cross-flow filtration) and low operating costs ($\$$0.06 per kg sugars). These results show a viable path towards operationally reliable, energy efficient, and cost-effective separations of sterilized cellulosic sugars from biomass solids and highlight the potential of dynamic filtration systems for challenging solid–liquid separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Editorial: Future perspectives on separation technologies

Sustainable separation process development is crucial in promoting economic and environmental sustainability. Separation processes can be energy-intensive, and early-stage or emerging separation technologies can also be costly. For instance, separations in biomass-based fuels and chemicals production can account for up to 50% of the production cost, while industrial separations can consume up to 15% of the total energy used in the United States. Separations are essential to many industrial processes and play a crucial role in helping industry achieve several United Nations sustainable development goals (SDG), such as clean energy, responsible production, and climate change mitigation. Therefore, it is imperative to have a comprehensive discussion within the scientific community to identify innovative approaches for sustainable separation processes. This editorial highlights the key insights and research findings presented in this research topic titled "Future Perspectives on Separation Technologies."

42 ENGINEERING↗

DOE OSTI2023

Refinery Perspective on Decarbonizing with Marine Biofuels

This work seeks to understand what biofuel production pathways a refinery might prefer to produce very low sulfur fuel oil (VLSFO) for marine applications. A comprehensive refinery optimization model was modified to allow for (1) direct blending of soy biodiesel, renewable diesel, Fischer-Tropsch diesel, and several pyrolysis oils and (2) indirect blending of all pyrolysis oils via co-processing in a fluidized catalytic cracker (FCC) and diesel hydrotreater into the marine fuel pool. Results showed that preferred pathways to bio-VLSFO production included co-processing low-quality pyrolysis oil in a FCC to blend the resulting biogenic light cycle oil, directly blending soy biodiesel, and directly blending small quantities of pyrolysis oil. Bio-VLSFO production costs were compared to those of fossil VLSFO subject to different marine fuel demands, benchmark crude oil prices, and biogenic fractions in the finished product. Given benchmark crude oil prices over 60 $/bbl, bio-VLSFO production appeared to be significantly cheaper than fossil VLSFO. Corresponding marginal abatement costs of CO 2 mostly ranging from -300 to 350 $/ton of CO 2 were also determined using a simplified but novel approach to allow for a comparison to other decarbonization strategies. In conclusion, this work indicates that low-sulfur contents in biofuels, relatively relaxed specifications for marine fuels, and current difficulties in meeting VLSFO specifications with crude oils can combine to make bio-VLSFO production cost-effective. Moreover, marine fuels appear to be a good entry point for refiners to start decarbonizing with biofuel pathways that could eventually be extended to other product pools.

09 BIOMASS FUELS↗

DOE OSTI2021

Atomic Layer Deposition with TiO2 for Enhanced Reactivity and Stability of Aromatic Hydrogenation Catalysts

Hydrogenation of aromatic molecules in fossil- and bio-derived fuels is essential for decreasing emissions of harmful combustion products and addressing growing concerns around urban air pollution. In this work, we used atomic layer deposition to significantly enhance the hydrogenation performance of a conventional supported Pd catalyst by applying an ultrathin coating of TiO2 in a scalable powder coating process. The TiO2-coated catalyst showed substantial gains in the conversion of multiple aromatic molecules, including a 5-fold improvement in turnover frequency versus the uncoated catalyst in the hydrogenation of naphthalene. This activity enhancement was maintained upon scaling the coating synthesis process from 3 to 100 g. Based on the results from Xray photoelectron spectroscopy, X-ray absorption spectroscopy, and computational modeling, the activity enhancement was attributed to ensemble effects resulting from partial TiO2 coverage of the Pd surface rather than fundamental changes to the Pd electronic structure. Additional durability testing confirmed that the TiO2 coating improved the thermal and hydrothermal stability of the catalyst as well as tolerance toward sulfur impurities in the reactant stream. Using an economic model of an industrial deep hydrogenation process, we found that an increase in catalyst activity or lifetime of 2× would justify even a relatively high estimate for the cost of TiO2 atomic layer deposition coatings at scale

atomic layer↗