INTERIM FINAL TECH REPORT: Nanoengineered Soft Magnetic Materials
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Tang, Haixiong.
Explore the source record for details and available documents.
The DOE seeks major reductions in the cost of concentrated solar power (CSP) to achieve subsidy-free, cost-competitive solar power by 2020. A significant step in achieving lower cost is the evolution to higher temperature operation. Molten chloride salts, and in particular KCl-MgCl2 currently appear to be to be the materials of choice to operate at these temperatures. The high working temperature and corrosive properties of these salts present an aggressive environment for CSP components. Valves seat and seals, bearings and impellers for pumps have additional requirements because of the dynamic mechanical loads that these components must survive. Alloys do not have good compatibility with salt and are expensive. Ceramic composites are difficult to form. This project offers a proof of concept for the use of ceramic, metal matrix nanocomposite materials to enable the economical construction and operation of molten salt pumps.
This study demonstrates a highly efficient method for large-scale synthesis BaTiO{sub 3} nanowires (NWs) using a two-step hydrothermal reaction. This synthesis process provides a facile approach to the growth of BaTiO{sub 3} NWs with high yield and control over the stoichiometry of the Ba{sub x}Sr{sub 1−x}TiO{sub 3} solid solution. The ferroelectricity of the BaTiO{sub 3} NWs is directly characterized using atomic force microscopy with the piezoelectric strain coupling coefficient (d{sub 33}) reaching 31.1 pm/V. This work provide an avenue for high volume manufacturing of ferroelectric NWs, allowing both fundamental investigation of nanoscale ferroelectricity as well as their future application in the electrical devices.
The relationship between the orientation of lead zirconate titanate (PZT) nanowires dispersed in nanocomposites and the resulting dielectric constants are quantified. The orientation of the PZT nanowires embedded in a polymer matrix is controlled by varying the draw ratio and subsequently quantified using Herman's Orientation Factor. Consequently, it is demonstrated that the dielectric constants of nanocomposites are improved by increasing the orientation factor of the PZT nanowires. This technique is proposed to improve the dielectric constant of the nanocomposites without the need for additional filler volume fraction since the nanocomposites are utilized in a wide range of high dielectric permittivity electronic components.