Search NASA⌕ Search

Engineering topics

Tang, R.

Publications and source records attributed to Tang, R..

Effects of Nb/Ti/V/Ta on phase precipitation and oxidation resistance at 1073 K in alumina-forming austenitic stainless steels

Highlights: • Effects of Nb/Ti/V/Ta on phase precipitation at 1073 K in AFA alloys are studied. • The precipitation of σ-FeCr can be accelerated by the formation of B2-NiAl. • The additions of V and Ta can improve the oxidation resistance of AFA alloys. • The precipitation of σ-FeCr will deteriorate the oxidation resistance. • Good performance can be achieved by M co-alloying and an appropriate M/C ratio. - Abstract: The present work investigated the effects of strong carbide-forming elements M (M = Nb, Ti, V, Ta) on the phase precipitation and oxidation resistance at 1073 K in alumina-forming austenitic (AFA) stainless steels (Fe-20Ni-(18–23)Cr-2.5Al-2.3Mo-0.08C-Nb/Ti/V/Ta wt%). The designed alloy rods were solid-solutioned at 1523 K for 1.5 h, and then aged at 1073 K for 24 h or oxidized at 1073 K for 500 h, respectively. Besides primary MC carbides, B2-NiAl, Fe{sub 2}M, and σ-FeCr phases would be precipitated from the γ-austenitic matrix in these aged AFA alloys. Furthermore, the precipitation of σ-FeCr could be accelerated by the B2-NiAl formation, which is related to the γ stability. The formation of MC and Fe{sub 2}M can be controlled via adjusting the ratio of M/C. The oxidation resistance of these AFA alloys can be improved effectively by V and Ta addition due to the formation of compact Al{sub 2}O{sub 3} protective scales. This work will provide a new approach to obtain a good combination of creep strength and oxidation resistance through co-alloying with Nb/Ta/V and controlling the M/C ratio within 1.0–2.0 (in molar ratio) simultaneously.

36 MATERIALS SCIENCE↗

New Capabilities for Hostile Environments on Z Grand Challenge LDRD - Final Status

The purpose of this project was to develop new physical simulation capabilities in order to support the science-based qualification of nonnuclear weapon components in hostile radiation environments. The project contributes directly to the goals of maintaining a safe, secure, and effective US nuclear stockpile, maintaining strategic deterrence at lower nuclear force levels, extending the life of the nuclear deterrent capability, and to be ready for technological surprise.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Brain Gene Expression Signatures From Cerebrospinal Fluid Exosome RNA Profiling

While the Visual Impairment and Intracranial Pressure (VIIP) syndrome observations have focused on ocular symptoms, spaceflight has been also associated with a number of other performance and neurologic signs, such as headaches, cognitive changes, vertigo, nausea, sleep/circadian disruption and mood alterations, which, albeit likely multifactorial, can also result from elevation of intracranial pressure (ICP). We therefore hypothesize that these various symptoms are caused by disturbances in the neurophysiology of the brain structures and are correlated with molecular markers in the cerebrospinal fluid (CSF) as indicators of neurophysiological changes. Exosomes are 30-200 nm microvesicles shed into all biofluids, including blood, urine, and CSF, carrying a highly rich source of intact protein and RNA cargo. Exosomes have been identified in human CSF, and their proteome and RNA pool is a potential new reservoir for biomarker discovery in neurological disorders. The purpose of this study is to investigate changes in brain gene expression via exosome analysis in patients suffering from ICP elevation of varied severity (idiopathic intracranial hypertension -IIH), a condition which shares some of the neuroophthalmological features of VIIP, as a first step toward obtaining evidence suggesting that cognitive function and ICP levels can be correlated with biomarkers in the CSF. Our preliminary work, reported last year, validated the exosomal technology applicable to CSF analysis and demonstrated that it was possible to obtain gene expression evidence of inflammation processes in traumatic brain injury patients. We are now recruiting patients with suspected IIH requiring lumbar puncture at Baylor College of Medicine. Both CSF (5 ml) and human plasma (10 ml) are being collected in order to compare the pattern of differentially expressed genes observed in CSF and in blood. Since blood is much more accessible than CSF, we would like to determine whether plasma biomarkers for elevated ICP can be identified. This may eventually lead to a blood test to diagnose intracranial hypertension.

Zanello, S. B.↗

A clamped rectangular plate containing a crack

The general problem of a rectangular plate clamped along two parallel sides and containing a crack parallel to the clamps is considered. The problem is formulated in terms of a system of singular integral equations and the asymptotic behavior of the stress state near the corners is investigated. Numerical examples are considered for a clamped plate without a crack and with a centrally located crack, and the stress intensity factors and the stresses along the clamps are calculated.

Tang, R.↗

A clamped rectangular plate containing a crack

The general problem of a rectangular plate clamped along two parallel sides and containing a crack parallel to the clamps is considered. The problem is formulated in terms of a system of singular integral equations and the asymptotic behavior of the stress state near the corners is investigated. Numerical examples are considered for a clamped plate without a crack and with a centrally located crack, and the stress intensity factors and the stresses along the clamps are calculated.

Tang, R.↗

Transient thermal stresses in a reinforced hollow disk or cylinder containing a radial crack

The transient thermal stress problem in a hollow cylinder or a disk containing a radial crack is considered. It is assumed that the cylinder is reinforced on its inner boundary by a membrane which has thermoelastic constants different than those of the base material. The transient temperature, thermal stresses and the crack tip stress intensity factors are calculated in a cylinder which is subjected to a sudden change of temperature on the inside surface. The results are obtained for various dimensionless parameters and material constants. The special cases of the crack terminating at the cylinder-membrane interface and of the broken membrane are separately considered and some examples are given.

Tang, R.↗

Stress intensity factors in a reinforced thick-walled cylinder

An elastic thick-walled cylinder containing a radial crack is considered. It is assumed that the cylinder is reinforced by an elastic membrane on its inner surface. The model is intended to simulate pressure vessels with cladding. The formulation of the problem is reduced to a singular integral equation. Various special cases including that of a crack terminating at the cylinder-reinforcement interface are investigated and numerical examples are given. Results indicate that in the case of the crack touching the interface the crack surface displacement derivative is finite and consequently the stress state around the corresponding crack tip is bounded; and generally, for realistic values of the stiffness parameter, the effect of the reinforcement is not very significant.

Tang, R.↗

Transient thermal stresses in a reinforced hollow disk or cylinder containing a radial crack

The transient thermal stress problem in a hollow cylinder or a disk containing a radial crack is considered. It is assumed that the cylinder is reinforced on its inner boundary by a membrane which has thermoelastic constants different than those of the base material. The transient temperature, thermal stresses and the crack tip stress intensity factors are calculated in a cylinder which is subjected to a sudden change of temperature on the inside surface. The results are obtained for various dimensionless parameters and material constants. The special cases of the crack terminating at the cylinder-membrane interface and of the broken membrane are separately considered and some examples are given.

Tang, R.↗