Search NASA⌕ Search

Engineering topics

Taylor, L. W.

Publications and source records attributed to Taylor, L. W..

6 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Experience in distributed parameter modeling of the Spacecraft Control Laboratory Experiment (SCOLE) structure

The Spacecraft Control Laboratory Experiment (SCOLE) configuration is used to compare exact and approximate solutions of the partial differential equations which define its structural dynamics. The need for a proof model for evaluating competing control laws demands that solutions be generated which not only exhibit accurate modal characteristics, but precise static deflections as well. Because precise pointing is required, the motion of the end bodies of the Shuttle-attached antenna must be known with great accuracy. Modal models are attractive because of their stable solutions but require hundreds of modes to obtain a static deflection accuracy of only one percent. Although proportional damping in bending agrees well with experimental results using the SCOLE experimental apparatus, modes which involve both torsion and bending differ significantly from proportional damping. A lumped mass model is used to generate exact static deflections, but only approximate modal characteristics. Asymptotic solutions to the distributed parameter system approximate very accurately the modal characteristics at high mode numbers. Ways are examined for refining the approximate solutions by applying a first-order variation and by employing singular perturbation techniques which are usually limited to ordinary differential equations. The most accurate solutions of the distributed parameter model of SCOLE are obtained by combining exact and asymptotic solutions.

Taylor, L. W.↗
NASA NTRS1986

A Quick Visual Power-Supply Monitor

Power-supply voltages quickly monitored by circuit equipped with light-emitting-diode (LED) display. Operator looking at display quickly spots whether power output voltage is above, below, or within acceptable limits. Tricolor LED displays high, low, and intermediate output voltages.

Taylor, L. W.↗
NASA NTRS1986

A guidance-motivated sensitivity analysis of an aero-assisted boost vehicle

A simple model of an aero-assisted booster is used to examine the contributions of propulsion system type, aerodynamic lift and flight trajectory to the efficiency with which payloads can be placed into low earth orbit. The higher propulsive efficiency of ramjet and scramjet propulsion has the potential of increasing the payload mass ratio significantly. The contributions of turbojet propulsion and aerodynamic lift are less significant. The additional complexity involved in using aerodynamic propulsion and lift requires dealing with a more comprehensive set of design variables than for rocket boosters. The approach taken is to derive a set of sensitivity functions which relate booster performance to the design variables. The problems of optimum mixing of aerodynamic lift with thrust and determining the optimal boost trajectory is treated. The potential payload capacity of a horizontal take-off air-breathing boost vehicle is examined. The optimization problem which considers propulsive efficiency, aerodynamic configuration, and control and guidance issues is discussed.

Taylor, L. W.↗
NASA NTRS1985

Using a life-cycle-cost criterion for multi-disciplinary design studies for the Manned Space Station

A life-cycle-cost measure for the Manned Space Station is suggested which considers the mass, initial cost, aerodynamic drag, electrical power, moment, required ground support, and expected life of subsystems or components. It is proposed that this life-cycle-cost measure be considered as a criterion for design trade-off studies involving controls and structures. Calculating the related sensitivities in the optimization process is discussed and then applied to specific examples. In the first example, the reaction control system is analyzed with regard to the design of its supporting structure and selection of rocket type. Values of support beam length, structural material selection, and rocket propellant selection are determined which minimize life-cycle-cost. In the second example, the alignment of solar arrays are analyzed for efficiency with regard to generating power, their drag, and their aerodynamic moment. Alignment angles are determined which again minimize life cycle cost. It seems clear from these and other examples that the proposed criterion has value for multi-disciplinary design studies for the Manned Space Station.

Taylor, L. W.↗
NASA NTRS1984

A program to form a multidisciplinary data base and analysis for dynamic systems

Diverse sets of experimental data and analysis programs have been assembled for the purpose of facilitating research in systems identification, parameter estimation and state estimation techniques. The data base analysis programs are organized to make it easy to compare alternative approaches. Additional data and alternative forms of analysis will be included as they become available.

Taylor, L. W.↗