Search NASA⌕ Search

Engineering topics

Thomas Vandal

Publications and source records attributed to Thomas Vandal.

First Provisional Land Surface Reflectance Product from Geostationary Satellite Himawari-8 AHI

A provisional surface reflectance (SR) product from the Advanced Himawari Imager (AHI) on-board the new generation geostationary satellite (Himawari-8) covering the period between July 2015 and December 2018 is made available to the scientific community. The Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm is used in conjunction with time series Himawari-8 AHI observations to generate 1-km gridded and tiled land SR every 10 minutes during day time. This Himawari-8 AHI SR product includes retrieved atmospheric properties (e.g., aerosol optical depth at 0.47μm and 0.51μm), spectral surface reflectance (AHI bands 1–6), parameters of the RTLS BRDF model, and quality assurance flags. Product evaluation shows that Himawari-8 AHI data on average yielded 35% more cloud-free, valid pixels in a single day when compared to available data from the low earth orbit (LEO) satellites Terra/Aqua with MODIS sensor. Comparisons of Himawari-8 AHI SR against corresponding MODIS SR products (MCD19A1) over a variety of land cover types with the similar viewing geometry show high consistency between them, with correlation coefficients (r) being 0.94 and 0.99 for red and NIR bands, respectively. The high-frequency geostationary data are expected to facilitate studies of ecosystems on daily to diurnal time scales, complementing observations from networks such as the FLUXNET.

Himawari-8 AHI↗

GeoNEX: A geostationary earth observatory at NASA Earth eXchange: Earth monitoring from operational geostationary satellite systems

The latest generation of geostationary satellites (Himawari 8/9, GOES-16/17, FY-4, GK-2A) carries sensors that closely mimic the spatial and spectral characteristics of widely used polar-orbiting, global monitoring sensors such as MODIS and VIIRS. When combined, data from various currently operating/planned geostationary platforms provide a geo-ring of hyper-temporal (5-10 minutes), multispectral observations at spatial resolutions as high as 500 m. These high frequency observations offer exciting new possibilities for monitoring our planet, including better retrievals of geophysical variables by overcoming cloud cover, enabling studies of diurnally varying phenomena in the atmosphere, land, and the oceans, and support operational decision-making in agriculture, hydrology and disaster management. The NASA Earth Exchange (NEX) team, in collaboration with scientists from JAXA, KARI, NOAA and other international institutions, created the GeoNEX (www.nasa.gov/geonex) pipeline to integrate data from all available geostationary platforms and produce and distribute spatially, temporally, and radiometrically consistent data for the earth science community. We envision various institutions adapting the Geo component (e.g., GeoNOAA, GeoKARI, GeoChiba, GeoJAXA, GeoCMA) and customizing the pipeline and downstream products to serve the local/regional research and applied science communities.

Ramakrishna R Nemani↗

High-Dimensional Similarity Search with Quantum-Assisted Variational Autoencoder

Recent progress in quantum algorithms and hardware indicates the potential importance of quantum computing in the near future. However, finding suitable application areas remains an active area of research. Quantum machine learning is touted as a potential approach to demonstrate quantum advantage within both the gate-model and the adiabatic schemes. For instance, the QVAE has been proposed as a quantum enhancement to the discrete VAE. We extend on previous work and study the real-world applicability of a QVAE by presenting a proof-of-concept for similarity search in large-scale high-dimensional datasets. While exact and fast similarity search algorithms are available for low dimensional datasets, scaling to high-dimensional data is non-trivial. We show how to construct a space-efficient search index based on the latent space representation of a QVAE. Our experiments show a correlation between the Hamming distance in the embedded space and the Euclidean distance in the original space on the MODIS dataset. Further, we find real-world speedups compared to linear search and demonstrate memory-efficient scaling to half a billion data points.

Data mining, similarity search, quantum machine le↗

Temporal Interpolation of Geostationary Satellite Imagery with Task Specific Optical Flow

Applications of satellite data in areas such as weather tracking and modeling, ecosystem monitoring, wildfire detection, and land-cover change are heavily dependent on the trade-offs to spatial, spectral and temporal resolutions of observations. In weather tracking, high-frequency temporal observations are critical and used to improve forecasts, study severe events, and extract atmospheric motion, among others. However, while the current generation of geostationary satellites have hemispheric coverage at 10-15 minute intervals, higher temporal frequency observations are ideal for studying mesoscale severe weather events. In this work, we apply a task specific optical flow approach to temporal up-sampling using deep convolutional neural networks. We apply this technique to 16-bands of GOES-R/Advanced Baseline Imager mesoscale dataset to temporally enhance full disk hemispheric snapshots of different spatial resolutions from 15 minutes to 1 minute. Experiments show the effectiveness of task specific optical flow and multi-scale blocks for interpolating high-frequency severe weather events relative to bilinear and global optical flow baselines. Lastly, we demonstrate strong performance in capturing variability during convective precipitation events.

Optical flow, temporal interpolation, geostationar↗

Virtual Sensing with Unsupervised Image-to-Image Translation

Earth observing satellites carrying multi-spectral sensors are widely used to monitor the physical and biological states of the atmosphere, land, and oceans. These satellites have different vantage points above the earth and different spectral imaging bands resulting in inconsistent imagery from one to another. This presents challenges in building downstream applications. What if we could generate synthetic bands for existing satellites from the union of all domains? We tackle the problem of generating synthetic spectral imagery for multispectral sensors as an unsupervised image-to-image translation problem with partial labels and introduce a novel shared spectral reconstruction loss. Simulated experiments performed by dropping one or more spectral bands show that cross-domain reconstruction outperforms measurements obtained from a second vantage point. On a downstream cloud detection task, we show that generating synthetic bands with our model improves segmentation performance beyond our baseline. Our proposed approach enables synchronization of multispectral data and provides a basis for more homogeneous remote sensing datasets.

Geostationary satellites↗

Generation of Continental Scale Percent Tree Cover Product Using Deep-learning and Multi-scale Remote Sensing Data

Spatially explicit percent tree cover (TC) estimation is critical for mapping forest aboveground biomass and its dynamics. While various TC products have been developed, there has not been a generalized framework that can be applied to diverse terrestrial ecosystems due to underlain extreme complexities. Deep learning algorithms can learn a spatial pattern and radiometric characteristics of tree canopy as a robust approximation of physical or empirical models, and thus have emerged as promising and efficient tools for large-scale TC mapping. In this study, we synergistically use very high-resolution aerial imageries (National Agriculture Imagery Program, NAIP) and medium resolution Landsat data to map continental-scale TC (CONUS and Mexico) through a hierarchical deep learning approach (Convolutional Neural Network), i.e., NAIP TC generated from a NAIP model is utilized to train a Landsat model. The produced TC product (hereafter, NEX-TC) is able to capture the spatial pattern of TC distribution and its changes driven by natural disturbance and human land management. We further explore and analyze the reliability and potential uncertainty of the NEX-TC by comparing it to lidar- (lidar-TC), National Land Cover Database (NLCD-TC), and MODIS Vegetation Continuous Field (MODIS-TC). This evaluation practice reveals that TC products based on passive optical sensors tend to underestimate TC across all land cover types while Landsat-based TCs (i.e., NEX-TC & NLCD-TC) perform better than the coarser MODIS TC estimate. Our results show that the NEX-TC is generally comparable to NLCD-TC but it particularly outperforms NLCD-TC and MODIS-TC over the dense forests where lidar-TC indicates >80% TC. These results indicate that our hierarchical deep learning approach and TC product will be effective and useful for characterizing large-scale tree cover and possibly associated carbon dynamics.

Landsat↗

Towards Physics Guided Optical Flow for Tracking Atmospheric Motion

Atmospheric 3D winds in the horizontal and vertical directions are critical for improving short-range and long-range forecasting. Such advancement in forecasting directly applies to research in a number of areas including convective processes, wildfire plumes and tornado prediction. Atmospheric Motion Vectors (AMVs) provide a passively sensed approach to quantifying horizontal motion and cloud heights, which are typically sourced from geostationary sensors due to the availability of high frequency observations. Recent work has shown that estimating AMVs by tracking individual pixels with dense optical flow is a promising new direction. In this work, we use a state-of-the-art convolutional neural network for optical flow (FlowNetS) in a physics-guided deep learning framework for predicting AMVs in the horizontal direction. The approach is semi-supervised and uses physically informed wind vectors from high-resolution numerical simulations (DYAMOND) for supervised learning followed by fine-tuning though warping and reconstruction of full-disk geostationary images (GOES-16). In the vertical direction, we use labels from the CALIPSO low-earth orbit satellite to predict cloud height from 16-band geostationary images with a neural network. We present results for both tasks on held-out time periods and secondary datasets.

geostationary↗

Communicating Metrics of Land Surface Temperature Variability Using Multi-sensor Machine Learning

Land surface temperature (LST) is a key climate observable used to detect changes in the Earth’s surface energy budget that influence carbon and water cycles. Land surface temperature exhibits strong diurnal variability, which geostationary satellites can observe at scale thanks to their temporal resolution. Due to anthropogenic climate and land use changes, the surface energy balance has been considerably modified and may be described by changes in diurnal temperature range and extremes. Using high performance computing and datasets from the NASA Earth Exchange, we exploit co-located, co-temporal observations from low-earth orbit (LEO) and geostationary (GEO) sensors to develop a deep learning-based method for LEO-to-GEO algorithm emulation. Our model is trained to predict MODIS Terra LST from GOES-16 thermal bands and achieves validation error <2K. Application of the model to unseen times of day (observed by MODIS Aqua) and a new GEO sensor (Himawari-8) observing an unseen spatial domain, demonstrate the generalization of the deep learning model across space, time and spectra. Further, time series clustering approaches are examined with the objective of identifying key indicators of change in diurnal cycling and extremes on a continental scale. Communicating LST variability observed by geostationary satellites can have impacts in multiple disciplines, from understanding of snow, vegetation and soil dynamics, to recognizing trends in heat events relevant to human health.

Kate Duffy↗

Towards Physics Guided Optical Flow for Tracking Atmospheric Motion

Observations of atmospheric 3D winds are critical for improving short-range and long-range forecasting. Such advancement in forecasting directly applies to research in a number of areas including convective processes, wildfire plumes and tornado prediction. Atmospheric Motion Vectors (AMVs) provide a passively sensed approach to quantifying horizontal motion and cloud heights, which are typically sourced from geostationary sensors due to the availability of high frequency observations. Recent work has shown that estimating AMVs by tracking individual pixels with dense optical flow is a promising new direction. In this work, we compare state-of-the-art convolutional neural networks for optical flow in a physics-guided deep learning framework for predicting AMVs. The approach is semi-supervised and uses physically informed wind vectors from high-resolution numerical simulations for supervised learning followed by fine-tuning though warping and reconstruction of full-disk geostationary images (GOES-16). In the vertical direction, we use labels from the CALIPSO low-earth orbit satellite to predict cloud height from 16-band geostationary images with a neural network. We present results for both tasks on held-out time periods and secondary datasets.

Geostationary↗

GeoNEX-ML: A Machine Learning System for Geostationary Satellite Imagery

Improved capabilities of earth monitoring satellites are enabling a wide range of studies on the environmental effects of climate change, often leveraging the recent advancements in machine learning. At the same time, the new capabilities, including higher spatial resolution and temporal frequency, are expanding the amount of data generated at exponential rates. Further, a large majority of archived datasets generated by scientific processing is never used. This motivates the development of an efficient machine learning system for end-to-end processing of multi-level satellite datasets, from level 1 top of atmosphere observations to user friendly environmental variables of interest. Using current generation geostationary satellites GOES-16/17 (NOAA/NASA), Himawari-8/9 (JAXA), and GK-2A (Korea), we present an interchangeable set of machine models to perform spectral adjustment, physical model emulation, LEO-GEO emulation, and optical flow in a high performance computing environment. We use these tools to generate consistent virtual observations across sensors, perform atmospheric correction and cloud detection, and estimate land surface temperature and atmospheric winds. This approach aims to improve the robustness of remotely sensed data processing by learning from diverse sets of observations while enabling near real-time and on-demand capabilities.

Geostationary satellites↗

A generalizable machine learning approach to predict land surface temperature

Monitoring of land surface and atmospheric states is highly reliant on satellite data. Traditionally, data products are generated using carefully tuned and validated algorithms for low-earth orbit (LEO) sensors. However, the emerging constellation of geostationary (GEO) sensors contributes global, high temporal resolution observations which can better capture the diurnal variability of key observables like land surface temperature (LST). Using high performance computing and datasets from the NASA Earth Exchange, we exploit co-located, co-temporal observations from LEO and GEO satellites to develop a deep learning-based method for sensor-to-sensor algorithm emulation. Our model is trained on GOES-16 thermal bands to predict MODIS Terra LST and achieves a validation error <2K. Further, application of the model to unseen times of day and a second GEO sensor observing an unseen spatial domain demonstrate the generalization of the deep learning model across space, time and spectra. We anticipate that the synergies between a variety of active orbit configurations can be used to accelerate application of existing algorithms to new datasets.

Kate Marie Duffy↗

GeoNEX-ML: A Machine Learning System for Earth Observations

Improved capabilities of earth monitoring satellites are enabling a wide range of studies on the environmental effects of climate change, often leveraging the recent advancements in machine learning. At the same time, the new capabilities, including higher spatial resolution and temporal frequency, are expanding the amount of data generated at exponential rates. At the NASA Earth eXchange (NEX), we build deep learning methods to learn from cross sensor satellite-based Earth observations for generating new datasets with efficient processing techniques. Using current generation geostationary satellites on NEX, we present an interchangeable set of machine models to perform spectral adjustment, physical model emulation, LEO-GEO emulation, and optical flow. These tools are used to generate consistent virtual observations across sensors, perform atmospheric correction and cloud detection, and estimate land surface temperature and atmospheric winds. This approach aims to improve the robustness of remotely sensed data processing by learning from diverse sets of observations while enabling near real-time and on-demand capabilities.

Geostationary↗

Deep Learning System for Efficient Processing of Geostationary Satellite Imagery

Improved capabilities of Earth monitoring satellites are enabling a wide range of studies on the environmental effects of climate change, often leveraging the recent advancements in machine learning. At the same time, the new capabilities, including higher spatial resolution and temporal frequency, are expanding the amount of data generated at exponential rates. Further, a large majority of archived datasets generated by scientific processing is never used. This motivates the development of an efficient machine learning system for end-to-end processing of multi-level satellite datasets, from level 1 top of atmosphere observations to user friendly environmental variables of interest. Using current generation geostationary satellites GOES-16/17 (NOAA/NASA), and Himawari-8/9 (JAXA), we present an interchangeable set of machine models to perform spectral adjustment among sensors, physical model emulation, LEO-GEO emulation, and optical flow in a high performance computing environment. We use these tools on the NASA Earth eXchange (NEX) to generate consistent virtual observations across sensors, perform atmospheric correction and cloud detection, and estimate surface reflectance, surface temperature and atmospheric winds. This approach aims to improve the robustness of remotely sensed data processing by learning from diverse sets of observations while enabling near real-time and on-demand capabilities.

Thomas Vandal↗

Atmospheric winds with deep optical flow

Improved capabilities of earth monitoring satellites are enabling a wide range of studies on the environmental effects of climate change, often leveraging the recent advancements in machine learning. At the same time, the new capabilities, including higher spatial resolution and temporal frequency, are expanding the amount of data generated at exponential rates. At the NASA Earth eXchange (NEX), we build deep learning methods to learn from cross sensor satellite-based Earth observations for generating new datasets with efficient processing techniques. Using current generation geostationary satellites on NEX, we present an interchangeable set of machine models to perform spectral adjustment, physical model emulation, LEO-GEO emulation, and optical flow. These tools are used to generate consistent virtual observations across sensors, perform atmospheric correction and cloud detection, and estimate land surface temperature and atmospheric winds. This approach aims to improve the robustness of remotely sensed data processing by learning from diverse sets of observations while enabling near real-time and on-demand capabilities.

Atmospheric winds↗