Search NASA⌕ Search

Engineering topics

Thomas, B.

Publications and source records attributed to Thomas, B..

14 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

An Integrated 520-600 GHz Sub-Harmonic Mixer and Tripler Combination Based on GaAs MMIC Membrane Planar Schottky Diodes

We present here the design, development and test of an integrated sub-millimeter front-end featuring a 520-600 GHz sub-harmonic mixer and a 260-300 GHz frequency tripler in a single cavity. Both devices used GaAs MMIC membrane planar Schottky diode technology. The sub-harmonic mixer/tripler circuit has been tested using conventional machined as well as silicon micro-machined blocks. Measurement results on the metal block give best DSB mixer noise temperature of 2360 K and conversion losses of 7.7 dB at 520 GHz. Preliminary results on the silicon micro-machined blocks give a DSB mixer noise temperature of 4860 K and conversion losses of 12.16 dB at 540 GHz. The LO input power required to pump the integrated tripler/sub-harmonic mixer for both packages is between 30 and 50 mW

passively cooled detectors↗
NASA NTRS2011

Compact Submillimeter-Wave Receivers Made with Semiconductor Nano-Fabrication Technologies

Advanced semiconductor nanofabrication techniques are utilized to design, fabricate and demonstrate a super-compact, low-mass (<10 grams) submillimeter-wave heterodyne front-end. RF elements such as waveguides and channels are fabricated in a silicon wafer substrate using deep-reactive ion etching (DRIE). Etched patterns with sidewalls angles controlled with 1 deg precision are reported, while maintaining a surface roughness of better than 20 nm rms for the etched structures. This approach is being developed to build compact 2-D imaging arrays in the THz frequency range.

Silicon micromachining↗
NASA NTRS2010

An Integrated 520-600 GHz Sub-Harmonic Mixer and Tripler Combination Based on GaAs MMIC Membrane Planar Schottky Diodes

We present here the design, development and test of an integrated sub-millimeter front-end featuring a 520-600 GHz sub-harmonic mixer and a 260-300 GHz frequency tripler in a single cavity. Both devices used GaAs MMIC membrane planar Schottky diode technology. The sub-harmonic mixer/tripler circuit has been tested using conventional machined as well as silicon micro-machined blocks. Measurement results on the metal block give best DSB mixer noise temperature of 2360 K and conversion losses of 7.7 dB at 520 GHz. Preliminary results on the silicon micro-machined blocks give a DSB mixer noise temperature of 4860 K and conversion losses of 12.16 dB at 540 GHz. The LO input power required to pump the integrated tripler/sub-harmonic mixer for both packages is between 30 and 50 mW.

Monolithic Microwave Integrated Circuit, (MMIC)↗
NASA NTRS1998

Development of a Compact, Ground-Based Ozone DIAL System

We are developing a portable, eye-safe, ground-based ozone lidar instrument specialized for ozone differential absorption lidar (DIAL) measurements in the troposphere. This prototype instrument is intended to operate at remote field sites and to serve as the basic unit for future monitoring projects requiring multi-instrument networks, such as that proposed for the Global Tropospheric Ozone Project (GTOP). GTOP is currently being formulated by a scientific panel of the International Global Atmospheric Chemistry Project to meet its goal to better understand the processes that control the global distribution of tropospheric ozone. In order for the lidar to be widely deployed in networks, it must be fairly easy to use and maintain as well as being cost-competitive with ground station launching ozone sondes which operate several times a day. To achieve these goals, emphasis is placed upon the incorporation of: (1) all-solid state transmitters which can reliably produce 20-40 mJ pulses; (2) a highly efficient, narrow-bandpass receiver; (3) dual analog and photon-counting detector channels; and (4) flexible, user-friendly control software.

Chyba, T. H.↗
NASA NTRS1995

Geometry and pulse profiles of x-ray pulsars: Asymmetric relativistic fits to 4U1538 - 52 and vela x-1

Model calculation of inhomogenuous magnetized neutron star atmospheres are used to analyze the phase-dependent spectra of 4U 1538-52 and Vela X-1 taking into account general relativistic effects. A chi (exp 2) fitting procedure is used on the Ginga data for these objects to determine the geometry and the magnetic structure of the polar caps, as well as their size and location on the surface of the stars. Other parameters determined by the fit are the masses and radii of neutron stars, the accretion rates, and the rotation and magnetic inclination angles including an azimuthal offset to reproduce the asymmetry of the pulse shapes. We find that general relativistic effects play a significant role in determining the derived cap sizes, the fluxes, and the observational appearance of the pulses. There is evidence that the polar caps are unequal and nonantipodal, suggesting either an off-center or bent magnetic axis, or a strong nondipole component. The magnetic field structure is approximated by a two-component model. The rotation axes are inferred to be moderately close to the mean magnetic axes and seen at large inclinations with respect to the line of sight.

Bulik, T.↗
NASA NTRS1981

Effects of drift on the transport of cosmic rays. IV - Modulation by a wavy interplanetary current sheet

The effect of a wavy interplanetary current sheet on the solar modulation of galactic cosmic rays is studied. A simple model of the heliospheric magnetic field is employed in which there is an Archimedean spiral magnetic field directed in one direction above the current sheet and another direction below. The current sheet itself is taken to be the extension by the solar wind of a surface that, at the sun, is a plane inclined at an angle alpha to the solar equator. Two magnetic sectors will therefore be seen by an observer within an angle alpha of the heliographic equator. A simple approximate model is used to investigate modulation. As the tilt angle alpha is increased from zero, it is found that the cosmic-ray intensity decreases. For reasonable variation of alpha from approximately 10 deg to approximately 30 deg, the change in intensity can be compared to that observed as one goes from solar minimum to solar maximum. It is concluded that changes in the waviness of the interplanetary current sheet can have an important, and perhaps dominant, effect in producing solar modulation of galactic cosmic rays.

Jokipii, J. R.↗