Search NASASearch

Engineering topics

Thomas, R. W.

Publications and source records attributed to Thomas, R. W..

At least 19 records

Remote sensing research for agricultural applications

Materials and methods used to characterize selected soil properties and agricultural crops in San Joaquin County, California are described. Results show that: (1) the location and widths of TM bands are suitable for detecting differences in selected soil properties; (2) the number of TM spectral bands allows the quantification of soil spectral curve form and magnitude; and (3) the spatial and geometric quality of TM data allows for the discrimination and quantification of within field variability of soil properties. The design of the LANDSAT based multiple crop acreage estimation experiment for the Idaho Department of Water Resources is described including the use of U.C. Berkeley's Survey Modeling Planning Model. Progress made on Peditor software development on MIDAS, and cooperative computing using local and remote systems is reported as well as development of MIDAS microcomputer systems.

Colwell, R. N.

Results of an irrigated lands assessment for water management in California

Periodic assessment of existing and future demands for water within California is one responsibility of the California Department of Water Resources (CDWR). The California Irrigated Lands Assessment for Water Management Project represented a 5-year joint research effort between the NASA and the CDWR with technical support from the University of California (UC) at Berkeley and at Santa Barbara. The objectives were: (1) to develop and demonstrate procedures for providing highly precise, timely, estimates of irrigated area on a statewide basis using Landsat sensor data, and (2) to develop, through research with small demonstration sites, a procedure for the inventory and mapping of crop groups on a regional basis. Both manual and computer-assisted analyses were investigated. This paper highlights the statewide irrigated lands inventory where a procedure for statewide estimation of irrigated land using full frame Landsat MSS imagery and sampled ground data was successfully demonstrated. The statewide estimate of 3 990 112 hectares was within + or - 1.32 percent relative standard error at the 95-percent Confidence Interval, well within the design goal. This procedure represents a new capability for obtaining near-real time data on changes in agricultural water use throughout the state.

Bauer, E. H.

An attribute-driven statistics generator for use in a G.I.S. environment

When performing research using digital geographic information it is often useful to produce quantitative characterizations of the data, usually within some constraints. In the research environment the different combinations of required data and constraints can often become quite complex. This paper describes a technique that gives the researcher a powerful and flexible way to set up many possible combinations of data and constraints without having to perform numerous intermediate steps or create temporary data bands. This method provides an efficient way to produce descriptive statistics in such situations.

Thomas, R. W.

A Landsat-based inventory procedure for agriculture in California

Agriculture, which occupies a vital position in the economy of the State of California, depends crucially on the available water. The California Department of Water Resources (DWR) is, therefore, greatly concerned with the total water requirements for agricultural applications. In view of the limitations of an area-limited, single-date survey system, the DWR has been cooperating with NASA and the University of California in a study of the applicability of Landsat imagery and digital data as an aid in making decisions concerning the management of water resources. Attention is given to a statewide inventory of irrigated land, computer-assisted estimation and mapping of irrigated land, and a crop type analysis using Landsat digital data.

Wall, S. L.

Irrigated lands assessment for water management: Technique test

A procedure for estimating irrigated land using full frame LANDSAT imagery was demonstrated. Relatively inexpensive interpretation of multidate LANDSAT photographic enlargements was used to produce a map of irrigated land in California. The LANDSAT and ground maps were then linked by regression equations to enable precise estimation of irrigated land area by county, basin, and statewide. Land irrigated at least once in California in 1979 was estimated to be 9.86 million acres, with an expected error of less than 1.75% at the 99% level of confidence. To achieve the same level of error with a ground-only sample would have required 3 to 5 times as many ground sample units statewide. A procedure for relatively inexpensive computer classification of LANDSAT digital data to irrigated land categories was also developed. This procedure is based on ratios of MSS band 7 and 5, and gave good results for several counties in the Central Valley.

Wall, S. L.

Estimation of irrigated land using Landsat digital data

Techniques developed by the University of California and NASA for the utilization of multitemporal Landsat digital data in estimating and mapping irrigated land are presented. Three dates of Landsat were registered to each other and to a USGS 7.5 minute quadrangle map base for approximately 1.9 million acres of land. Other data registered include county boundaries, land use stratification, and digitized ground data. To identify irrigated land, an indicator was used which consisted of the ratio of MSS Band 7 to MSS Band 5 (the 7/5 ratio). A threshold 7/5 irrigated land value was determined for each date, as actively growing land generally has a higher 7/5 ratio than other cover classes. An estimate of irrigated land was determined by Landsat classification with ground data, at a relative standard error of + or - 7.98% at the 95% confidence interval. Mapping evaluation reveals a 94% accuracy, a 7.4% omission rate, and a 6.3% commission rate. In addition, a sample unit size evaluation recommends a 1-1 1/2 square mile sample range.

Brown, C. E.

CROP type analysis using Landsat digital data

Classification and statistical sampling techniques for crop type discrimination using Landsat digital data have been developed by the University of California in cooperation with NASA and the California Department of Water Resources. Ratioed bands (MSS 7/5 and 5/4) and a sun-angle corrected Euclidean albedo band were prepared from data for the Sacramento Valley for five different dates. The test area was stratified into general crop groupings based on the particular patterns of irrigation timing for each crop. Data classified within each stratum were used to produce a crop type map. Comparison with ground data indicates that certain crops and crop groups are discernable. Small grains and rice are easily identifiable, as are deciduous fruit varieties as a group. However, it is not feasible to separate various fruit and nut varieties, or separate vegetable crops with these techniques at present.

Brown, C. E.

Landsat-based estimation of California's irrigated land

The procedure developed uses two-phase sampling, stratification and multidate Landsat imagery to produce the estimate. Maximizing the advantages of both spectral data and field patterns available from Landsat, three dates of Landsat imagery are interpreted to provide county-wide estimates of the proportion of land irrigated. Ground data, collected on a subset of the area interpreted on Landsat, are used to calibrate the satellite estimate. The satellite and ground measurements are reduced to proportion data and linked using a regression estimator to produce the estimate of irrigated land. It is estimated that 3.99 million hectares were irrigated with a relative standard error of + or - 1.18% at the 99% confidence level. Acreage tabulations provided by the Department of Water Resources show that the Landsat-based estimate differed by less than 0.4% at the state level.

Wall, S. L.

Development of partitioning as an aid to spectral signature extension

Lists of spectrally similar LACIE sample segments may be constructed with the use of three basic information types: static, seasonal, and pass-specific variables. All are related directly or indirectly to spectral signature behavior and can be used to define spatial domains over which crop-specific signatures should be extendable. Topics covered include: (1) static spectral stratification; (2) evaluation of static partitions relative to variance control objectives; (3) evaluation of the relative importance of static versus seasonal and pass-specific partitioning variables in spectral variability; and (4) a current perspective on partitioning.

Thomas, R. W.

Landsat-based multiphase estimation of California's irrigated lands

Currently, inventory of California's irrigated lands is performed on a seven year cycle. Since 1975, the University of California in cooperation with NASA and the California Department of Water Resources has been developing and testing techniques to utilize a Landsat based remote sensing system to produce statewide estimates in a single year. The proposed system utilizes multiphase sampling, stratification and multitemporal Landsat imagery to produce the estimate. Early research concentrated on regional estimates to develop the techniques. This year, an inventory of the entire state of California is being performed. In addition, research on the utilization of digital analysis for estimating irrigated acreage and the determination of specific crop types (manual and digital analysis) is also underway.

Wall, S. L.

Development and evaluation of a helicopter-borne water-quality monitoring system

A small, helicopter-borne water-quality monitoring package is being developed by the NASA/EPA using a combination of basic in situ water quality sensors and physical sample collector technology. The package is a lightweight system which can be carried and operated by one person as a passenger in a small helicopter typically available by rental at commercial airports. Real-time measurements are made by suspending the water quality monitoring package with a cable from the hovering helicopter. Designed primarily for use in rapidly assessing hazardous material spills in inland and coastal zone water bodies, the system can survey as many as 20 data stations up to 1.5 kilometers apart in 1 hour. The system provides several channels of sensor data and allows for the addition of future sensors. The system will also collect samples from selected sites with sample collection on command. An EPA Spill Response Team member can easily transport, deploy, and operate the water quality monitoring package to determine the distribution, movement, and concentration of the spilled material in the water body.

Wallace, J. W.

Development of techniques for producing static strata maps and development of photointerpretive methods based on multitemporal LANDSAT data

Progress in the evaluation of the static stratification procedure and the development of alternative photointerpretive techniques to the present LACIE procedure for the identification of training fields is reported. Statistically significant signature controlling variables were defined for use in refining the stratification procedure. A subset of the 1973-74 Kansas LACIE segments for wheat was analyzed.

Colwell, R. N.

Two phase sampling for wheat acreage estimation

A two phase LANDSAT-based sample allocation and wheat proportion estimation method was developed. This technique employs manual, LANDSAT full frame-based wheat or cultivated land proportion estimates from a large number of segments comprising a first sample phase to optimally allocate a smaller phase two sample of computer or manually processed segments. Application to the Kansas Southwest CRD for 1974 produced a wheat acreage estimate for that CRD within 2.42 percent of the USDA SRS-based estimate using a lower CRD inventory budget than for a simulated reference LACIE system. Factor of 2 or greater cost or precision improvements relative to the reference system were obtained.

Thomas, R. W.

Two phase sampling for wheat acreage estimation

A two-phase Landsat-based sample allocation and wheat proportion estimation method was developed. The technique employs manual, Landsat full frame-based wheat or cultivated land proportion estimates from a large number of segments comprising a first sample phase to optimally allocate a small phase-two sample of computer or manually processed segments. Proportion estimates from each phase are then linked by regression or probability proportional to estimated size estimators to provide wheat proportion estimates and standard errors by reporting unit. Application to the Kansas Southwest CRD (Crop Reporting District) for 1974 produced a wheat acreage estimate for that CRD within 2.42% of the USDA SRS-based estimate using a lower CRD inventory budget than for a simulated reference LACIE (Large Area Crop Inventory Experiment) system.

Thomas, R. W.

Two phase sampling for wheat acreage estimation

A two phase Landsat-based sample allocation and wheat proportion estimation method was developed. This technique employs manual, Landsat full frame-based wheat or cultivated land proportion estimates from a large number of segments comprising a first sample phase to optimally allocate a smaller phase two sample of computer or manually processed segments. Application to the Kansas Southwest CRD for 1974 produced a wheat acreage estimate for that CRD within 2.42 percent of the USDA SRS-based estimate using a lower CRD inventory budget than for a simulated reference LACIE system. Factor of 2 or greater cost or precision improvements relative to the reference system were obtained

Thomas, R. W.

Development of techniques for producing static strata maps and development of photointerpretation methods based on multitemporal LANDSAT data

The progress of research conducted in support of the Large Area Crop Inventory Experiment (LACIE) is documented. Specific tasks include (1) evaluation of the static stratification procedure and modification of that procedure if warranted, and (2) the development of alternative photointerpretative techniques to the present LACIE procedures for the identification and selection of training fields (areas).

Colwell, R. N.

A remote sensing-aided small grains inventory using sequential Landsat imagery

A procedure for manual acreage estimation from Landsat imagery is proposed which involves a stepwise sequence of area stratification, simple size estimation, acreage estimation, and acreage precision calculation. The sample design consists of a systematic point sample of the Landsat imagery for crop type presence calibrated by a double sample of several image points having crop season-coincident ground data. The sample point layout chosen for cost-efficiency in manual sampling is a doubly aligned point matrix. The significant advantage of this sampling approach is that crop information is available from throughout the agricultural reporting unit. For technique demonstration purposes three strata were selected for sampling. The proposed technique can complement more sophisticated computer-based acreage estimation methodologies, and refinements in the sampling techniques promise significant improvements for operational utility.

Thomas, R. W.