Search NASA⌕ Search

Engineering topics

Thome, Kathreen E.

Publications and source records attributed to Thome, Kathreen E..

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Accuracy of kinetic equilibrium reconstruction of NSTX and NSTX-U plasmas and its impact on the transport and stability analysis

An accurate magnetohydrodynamic (MHD) equilibrium reconstruction is an essential starting point for stability and transport plasma analysis. Herein this work describes an approach for obtaining kinetic equilibrium reconstructions using the OMFIT framework, which has been applied for the first time to spherical tokamak data from NSTX and NSTX-U. The EFIT equilibrium solver is integrated with experimental data analysis procedures and subsequent TRANSP transport simulations to enhance the accuracy of the reconstruction, in particular, at the edge region, by adding constraints on the total pressure and current density profiles, based on the transport code solution. The accuracy of the equilibrium reconstruction depends on the uncertainty and number of constraints, as well as the choice of basis functions to represent the pressure and current density profiles. Improved fidelity of the equilibrium reconstruction is demonstrated by reducing the variability of the magnetic axis and boundary locations from several centimeters, for reconstructions based on magnetic and experimental pressure constraints, to only several millimeters, for kinetic reconstructions based on transport code constraints, when different representations of basis functions were tested. The variability of the safety factor on axis was reduced ten times in the same sensitivity study. The accuracy of the equilibrium reconstruction and subsequent mapping of the experimental kinetic profile data have a significant impact on the trapped gyro Landau fluid and linear CGYRO turbulence simulations, which predict different spectra of unstable modes and turbulent fluxes for cases with different numbers of constraints in the equilibrium reconstruction. Conversely, the stability analysis performed using the GATO code shows plasmas that are stable to n = 1 MHD modes in both equilibria using magnetic and experimental pressure constraints as well as the transport code constrained equilibrium. However, a scan of parameters away from these conditions shows considerable deviation in the threshold of unstable modes between these reconstructions. Therefore, for reliable plasma analysis and use in turbulence and stability calculations, a high-fidelity equilibrium reconstruction with accurate kinetic constraints based on transport code solutions is necessary.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Virtual Tokamak for Test and Development of Plasma Control Applied to NSTX-U

Safe and efficient operation of tokamak experiments depends on shot preparation prior to the experiment to maximize performance and avoid issues that are predictable consequences of known physics. The General Atomics TokSys toolbox is used to test and develop the plasma control system (PCS) on numerous tokamaks around the world. Tokamaks that use a version of the DIII-D PCS can connect it to a TokSys simulation and control a virtual version of the tokamak with the real PCS. Recent upgrades to the simulation include more detailed profile and transport modeling to support design and implementation of optimized scenarios. The simulation combines a module called “Profiles” that simulates the 1D profiles of density, pressure, and current and a module called “GSevolve'' that evolves the 2D Grad-Shafranov equilibrium. The “Profiles'' module primarily uses simplified models for fueling, heating, and current. The TRANSP code provides precomputed diffusion coefficients and heating/current drive profiles from radio-frequency and neutral beam sources for the scenarios being simulated. The fidelity of a simulation can be enhanced by analyzing it with TRANSP and making corrections to the precomputed values and iterating until convergence. Simulations of the National Spherical Torus Upgrade (NSTX-U) are presented. It is shown that the simulation reproduces the experimental profile evolution. Here, the simulation has also been upgraded to reproduce the experimental outcome at points of bifurcation. This is demonstrated with a simulation of vertical displacement in NSTX-U.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Nonlinear, real-time optimization for actuator management in tokamaks

Experiments in DIII-D have been carried out to test a novel actuator management approach in tokamaks. Here, the actuator management scheme is posed as a nonlinear-optimization problem in which the actuator commands are calculated in real time according to the changing control priorities, plasma state, and actuator availability. Such optimization problem is solved using the augmented Lagrangian method, combined with a gradient projection method and a conjugate-gradient iteration algorithm. The algorithmic approach followed in this work does not depend on the particular control objectives or actuators considered, which facilitates its integration with other independently-designed control components within a plasma-control system. In addition, the actuator-management algorithm is able to handle the optimization problem in a computationally efficient manner, making it suitable for real-time implementations. Initial DIII-D results in the steady-state high-q min scenario have demonstrated the capabilities of the actuator manager to perform both simultaneous multiple mission and repurposing sharing, which will be required in ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Transition from ITG to MTM linear instabilities near pedestals of high density plasmas

Here, investigation of linear gyrokinetic ion-scale modes ( k θ ρ s = 0.3) finds that a transition from ion temperature gradient to microtearing mode (MTM) dominance occurs as the density is increased near the pedestal region of a parameterized DIII-D sized tokamak. H-modes profile densities, temperatures, and equilibria are parameterized utilizing the OMFIT PRO_create module. With these profiles, linear gyrokinetic ion-scale instabilities are predicted with CGYRO. This transition (nMTM) has a weak dependence on radial location in the region near the top of the pedestal ( ρ = 0.7 – 0.9), which allows simulating single radii to examine the approximate scaling of nMTM with global parameters. The critical nMTM is found to scale with plasma current. Additionally, increasing the minor radius by decreasing the aspect ratio and increasing the major radius are found to reduce nMTM. However, any relationship between nMTM and density limit physics remains unclear as nMTM increases relative to the Greenwald density with larger minor radius and with larger magnetic field, suggesting that the transport due to MTM may be less important for a reactor. Additionally, nMTM is sensitive to the pedestal temperature, the local electron and ion gradients, the ratio of ion to electron temperature T i / T e, and the current profile. MTMs are predicted to be the dominant instability in the core at similar Greenwald fractions for DIII-D, NSTX, and NSTX-U H-mode experiments, supporting the results of the parameterized study. Additionally, MTMs continue to be the dominant linear instability in a DIII-D L-mode after an H–L transition as the plasma approaches a density limit disruption despite the large change in plasma profiles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Integrated control of individual plasma scalars with simultaneous neoclassical tearing-mode suppression

A novel integrated-control architecture has been tested in nonlinear, one-dimensional simulations using the control-oriented transport simulator (COTSIM©) and in DIII-D experiments. Integrated architectures that can perform continuous-mission control while also handling off-normal events will be vital in future reactor-grade tokamaks. Continuous-mission controllers for individual magnetic and kinetic scalars (thermal stored-energy (W), volume-average toroidal rotation (Ω Φ ), and safety factor profile (q) at different spatial locations) have been integrated in this work with event-triggered neoclassical tearing-mode (NTM) suppression controllers by combining them into an architecture augmented by a supervisory and exception handling (S&EH) system and an actuator management (AM) system. Here, the AM system, which enables the integration of competing controllers, solves in real time a nonlinear optimization problem that takes into account the high-level control priorities dictated by the S&EH system. The resulting architecture offers a high level of integration and some of the functionalities that will be required to fulfill the advanced-control requirements anticipated for ITER. Initial simulations using COTSIM suggest that the plasma performance and its MHD stability may be improved under integrated feedback control. In addition, the integrated-control architecture has been implemented in the DIII-D plasma control system and tested experimentally for the first time ever in DIII-D in a high-q min scenario, which is a candidate for steady-state operation in ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Diverted Negative Triangularity plasmas on DIII–D: The benefit of high confinement without the liability of an edge pedestal

Diverted discharges at negative triangularity on the DIII-D tokamak sustain normalized confinement and pressure levels typical of standard H-mode scenarios (H 98y,2 ≅1, β N ≅3) without developing an edge pressure pedestal, despite the auxiliary power far exceeding the L → H power threshold expected from conventional scaling laws. The power degradation of confinement is substantially weaker than the ITER-89P scaling, resulting in a confinement factor that improves with increasing auxiliary power. Furthermore, the absence of the edge pedestal is beneficial in several aspects, such as eliminating the need for active mitigation or suppression of edge localized modes, low impurity retention and a reconstructed scrape-off layer heat flux width at the mid-plane that exceeds the ITPA multi-machine scaling law by up to 50%. Together with technological advantages granted by placing the divertor at larger radii, plasmas at Negative Triangularity without an edge pedestal feature both core confinement and power handling characteristics that are potentially suitable for operation in future fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Erratum: “On virial analysis at low aspect ratio” [Phys. Plasmas 23, 072508 (2016)]

This article corrects an error in M.W. Bongard et al., 'On Virial Analysis at Low Aspect Ratio,' Phys. Plasmas 23, 072508 (2016) pertaining to a typographical error in its equation 21. Furthermore, all numerical calculations reported in this paper utilized the correct formulation described here. Accordingly, no changes to the conclusions of the original article are required.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Cause and impact of low-frequency chirping modes in DIII-D hybrid discharges

Significant variations in MHD activity and fast-ion transport are observed in the DIIID high-beta, steady-state hybrid discharges with a mixture of Electron Cyclotron (EC) waves and Neutral Beam Injection (NBI). When Electron Cyclotron Heating (ECH) or Current Drive (ECCD) is applied, Alfven Eigenmodes (AEs) are usually suppressed and replaced by low-frequency bursting modes. The analysis of a recently compiled database of hybrid discharges suggests that the change of the fast-ion pressure especially the perpendicular pressure is the main factor responsible for the instability transition. The lower ratio of fast-ion injection speed v inj to Alfven speed v alfven and slight drop of safety factor q min during ECCD may also facilitate the transition. The database shows that AEs mainly occur when the fast-ion fraction P f /P total is less than 0.53 and v inj /v alfven is greater than 0.50, while low-frequency bursting modes appear in the opposite regime. In this research, P f and P total are the central fast-ion pressure from classical prediction and total plasma pressure, respectively. The reason why the instability transition correlates with P f /P total and v inj /v alfven is that they can significantly modify the drive of low-frequency bursting modes and AEs. The explanation is supported by the observation that low-frequency bursting modes are rarely seen in the hybrids with NBI only, with EC waves and counter-NBI, or with high plasma density. A careful check of the low-frequency bursting modes suggests that they are mainly chirping (neoclassical) tearing modes [referred to as chirping (N)TM], i.e. the mode frequency firstly jumps up from the steady (N)TM frequency, then chirps down, and finally returns to the steady (N)TM frequency. Sometimes, the (N)TMs are fully stabilized and replaced with pure fishbones. Lastly, the resonance condition calculation and ’Kick’ model simulations suggest that (N)TMs and fishbones can interact through modification of the fast ion distribution in phase space, which influences the drive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Impurity transport in the pedestal of H-mode plasmas with resonant magnetic perturbations

Experiments on DIII-D show that resonant magnetic perturbations (RMPs) reduce the impurity confinement time in the H-mode pedestal below that of naturally ELMy plasmas. STRAHL modeling of discharges with aluminum laser blow off (LBO) injection show increased diffusion in the pedestal of H-mode discharges with RMPs. The increased diffusion from the RMPs provides improved impurity control compared to the naturally ELMy discharges and prevents the buildup of impurities near the edge of the plasma. Tungsten LBO injection into discharges with and without RMPs led to striking differences in the evolution of the discharge. The naturally ELMy discharge became ELM free and showed an increase in edge radiation, leading to the eventual radiative collapse of the plasma. Injecting a similar number ofWparticles into discharges with RMPs, either with or without ELMs, led to a measurable accumulation of core W but did not significantly impact the evolution of the discharge. Furthermore, these results indicate that RMPs are beneficial for controlling the buildup of impurities in the pedestal region of the plasma.

60 APPLIED LIFE SCIENCES↗