Search NASA⌕ Search

Engineering topics

Thompson, Carol

Publications and source records attributed to Thompson, Carol.

5 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Burton-Cabrera-Frank theory for the influence of off-cut direction on the growth of hcp crystals

The precise direction of the off-cut of a vicinal crystal surface determines the azimuth (in-plane angle) of the surface steps and thus their kink density. Here we develop a Burton-Cabrera-Frank (BCF) theory for step-flow crystal growth that includes the effects of step azimuth. We focus on the basal-plane surfaces of hexagonal close-packed (hcp) and related crystal structures, for which surface steps have alternating properties that depend on azimuth. We build on a previous treatment that considered only a single-step azimuth, 𝜙 = 0, that gives alternating steps of pure A and B type. As 𝜙 increases from zero, the density of kinks on the steps increases. For hcp-type crystals, in addition the structural difference between alternating steps decreases, until they become equivalent at 𝜙 = 30°. We consider the azimuth dependence of the step transparency, attachment, and repulsion parameters of the BCF model, including the effects of both geometrically required and thermally generated kinks. Example calculations are presented that demonstrate the overall effect of step azimuth on BCF predictions for step spacings during steady-state growth and for their dynamics during growth transients. Effects of symmetric and asymmetric step-step repulsion are discussed.

Ju, Guangxu↗
DOE OSTI2024

X-ray-induced piezoresponse during X-ray photon correlation spectroscopy of PbMg 1/3 Nb 2/3 O 3

X-ray photon correlation spectroscopy (XPCS) holds strong promise for observing atomic-scale dynamics in materials, both at equilibrium and during non-equilibrium transitions. Here an in situ XPCS study of the relaxor ferroelectric PbMg 1/3 Nb 2/3 O 3 (PMN) is reported. A weak applied AC electric field generates strong response in the speckle of the diffuse scattering from the polar nanodomains, which is captured using the two-time correlation function. Correlated motions of the Bragg peak are also observed, which indicate dynamic tilting of the illuminated volume. This tilting quantitatively accounts for the observed two-time speckle correlations. The magnitude of the tilting would not be expected solely from the modest applied field, since PMN is an electrostrictive material with no linear strain response to the field. A model is developed based on non-uniform static charging of the illuminated surface spot by the incident micrometre-scale X-ray beam and the electrostrictive material response to the combination of static and dynamic fields. The model qualitatively explains the direction and magnitude of the observed tilting, and predicts that X-ray-induced piezoresponse could be an important factor in correctly interpreting results from XPCS and nanodiffraction studies of other insulating materials under applied AC field or varying X-ray illumination.

36 MATERIALS SCIENCE↗
DOE OSTI2021

In situ microbeam surface X-ray scattering reveals alternating step kinetics during crystal growth

The stacking sequence of hexagonal close-packed and related crystals typically results in steps on vicinal {0001} surfaces that have alternating A and B structures with different growth kinetics. However, because it is difficult to experimentally identify which step has the A or B structure, it has not been possible to determine which has faster adatom attachment kinetics. Here we show that in situ microbeam surface X-ray scattering can determine whether A or B steps have faster kinetics under specific growth conditions. We demonstrate this for organo-metallic vapor phase epitaxy of (0001) GaN. X-ray measurements performed during growth find that the average width of terraces above A steps increases with growth rate, indicating that attachment rate constants are higher for A steps, in contrast to most predictions. Overall, our results have direct implications for understanding the atomic-scale mechanisms of GaN growth and can be applied to a wide variety of related crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Crystal truncation rods from miscut surfaces with alternating terminations

Miscut surfaces of layered crystals can exhibit a stair-like sequence of terraces having periodic variation in their atomic structure. For hexagonal close-packed and related crystal structures with an αβαβ stacking sequence, there have been long-standing questions regarding how the differences in adatom attachment kinetics at the steps separating the terraces affect the fractional coverage of α vs. β termination during crystal growth. To demonstrate how surface X-ray scattering can help address these questions, we develop a general theory for the intensity distributions along crystal truncation rods (CTRs) for miscut surfaces with a combination of two terminations. We consider half-unit-cell-height steps, and variation of the coverages of the terraces above each step. Example calculations are presented for the GaN (0001) surface with various reconstructions. These show which CTR positions are most sensitive to the fractional coverage of the two terminations. We compare the CTR profiles for exactly oriented surfaces to those for vicinal surfaces having a small miscut angle, and investigate the circumstances under which the CTR profile for an exactly oriented surface is equal to the sum of the intensities of the corresponding family of CTRs for a miscut surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗