Engineering topics

Thompson, Paul

Publications and source records attributed to Thompson, Paul.

At least 19 records

DOE OSTI2025

The classical-to-quantum crossover in the strain-induced ferroelectric transition in SrTiO3 membranes

Mechanical strain presents an effective control over symmetry-breaking phase transitions. In quantum paralelectric SrTiO3, strain can induce ferroelectric order via modification of the local Ti potential energy landscape. However, brittle bulk materials can only withstand limited strain range (~0.1%). Taking advantage of nanoscopically-thin freestanding membranes, we demonstrate an in- situ strain-induced reversible ferroelectric transition in freestanding SrTiO3 membranes. We measure the ferroelectric order by detecting the local anisotropy of the Ti 3d orbital signature using x-ray linear dichroism at the Ti-K pre-edge, while the strain is determined by x-ray diffraction. With reduced thickness, the SrTiO3 membranes remain elastic with >1% tensile strain cycles. A robust displacive ferroelectricity appears beyond a temperature-dependent critical strain. Interestingly, we discover a crossover from a classical ferroelectric transition to a quantum regime at low temperatures, which enhances strain-induced ferroelectricity. Our results offer new opportunities to strain engineer functional properties in low dimensional quantum materials and provide new insights into the role of ferroelectric fluctuations in quantum paraelectric SrTiO3.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Bridging big data in the ENIGMA consortium to combine non-equivalent cognitive measures

Not provided.

Science & Technology - Other Topics↗

NASA NTRS2021

Mars 2020 Perseverance trajectory reconstruction and performance from launch through landing

The Mars 2020 (M2020) Mission carrying Perseverance, the most advanced rover ever sent to Mars, successfully launched on an Atlas V 541 (AV-088) launch vehicle from the Eastern Test Range (ETR) at Cape Canaveral Air Force Station (CCAFS) in Florida at 11:50:00 UTC (T-Zero time) on July 30, 2020. After some station reconfiguration, carrier/telemetry were locked at both Deep Space Network (DSN) Canberra and Goldstone stations. Perseverance entered the Martian atmosphere at 20:36:50 Spacecraft Event Time (SCET) UTC, and landed inside Jezero Crater at 20:43:49 SCET UTC on February 18, 2021. Confirmation of nominal landing was received at the DSN Goldstone and Madrid tracking stations via the Mars Reconnaissance Orbiter at 20:55:11 Earth Received Time (ERT) UTC. This paper summarizes in detail the actual vs. predicted performance in terms of launch vehicle events, launch vehicle injection performance, actual DSN spacecraft lockup, trajectory correction maneuver performance, Entry, Descent, and Landing events, and overall trajectory and geometric characteristics.

Abilleira, Fernando↗

NASA NTRS2021

Mars 2020 Perseverance Trajectory Reconstruction and Performance from Launch through Landing

Wong, Mau↗

NASA NTRS2019

Charting a course to the sun: flight path control for Parker Solar Probe

The successful launch of the Parker Solar Probe (PSP) on August 12, 2018 with a Delta IV rocket and Star-48BV third stage has placed the spacecraft on a 7-year trajectory to study the Sun. The goals of PSP are to better characterize our solar environment and advance our understanding of the Sun at 9.86 Rs. A total of 42 trajectory correction maneuvers are planned. This paper documents trajectory correction maneuver analysis performed just prior to launch until just past the ﬁrst solar encounter. The pre-launch analysis culminated in two ﬁnal design cycles which analyzed 24 reference trajectories.

Ryne, Mark↗

NASA NTRS2019

Charting a Course to the Sun: Flight Path Control for Parker Solar Probe

UNKNOWN

Mottinger, Neil↗

NASA NTRS2017

Orbit Determination Covariance Analyses for the Parker Solar Probe Mission

This paper details pre-launch navigation covariance analyses for the Parker Solar Probe mission. Baseline models and error assumptions are outlined. The results demonstrate how navigation will satisfy requirements and are used to define operational plans. A few sensitivities are identified and the accompanying investigations are described. Predicted state uncertainty results show that most requirements are met with substantial margin. Moreover, navigation sensitivities may be accommodated operationally and this has been incorporated into project planning. Detailed results are presented only for select launch dates, however twenty unique trajectories (one per launch opportunity) have been assessed.

Jones, Drew Ryan↗

NASA NTRS2017

Flight Path Control Analysis for Parker Solar Probe

An unprecedented NASA mission to study the Sun, known as Parker Solar Probe (PSP), is under development. The primary objective of the PSP mission is to gather new data within 10 solar radii of the Sun’s center. The purpose of this paper is to review the statistical analysis of trajectory correction maneuvers (TCMs) for PSP’s baseline trajectory. The baseline mission includes a total of 42 TCMs that will be accomplished with a monopropellant propulsion system that consists of twelve 4.4 N thrusters. Assuming current navigation models, statistical analyses for each reference trajectory during the 20-day launch period result in a total V99 of less than 100 m/s.

Mottinger, Neil↗

NASA NTRS2017

Juno Orbit Determination Experience During First Year At Jupiter

The Juno spacecraft successfully inserted into a polar orbit around Jupiter on 5- July-2016. Since the Jupiter Orbit Insertion (JOI) maneuver, Juno has completed six orbits around Jupiter. The mission plan at the time of JOI was for Juno to perform two 53.5-day capture orbits before executing a Period Reduction Maneuver (PRM) to place the spacecraft into its intended 14-day science orbit. This maneuver was canceled due to a concern with the propulsion system. As a result, the Juno spacecraft will remain in its longer orbit period for rest of its mission. This paper discusses the Navigation Team’s experience: the orbit determination strategy and how it changed due to the cancellation of the PRM, challenges fitting the data during perijove, and how we reconstructed the trajectory during Juno’s first year in orbit.

Thompson, Paul↗

NASA NTRS2017

B-plane Evolution Under Highly Non-Keplerian Dynamics

Juno is the second of a series of New Frontiers missions and was launched in 2011. The spacecraft was set en route to Jupiter, and its Jupiter Orbit Insertion occurred on 2016-07-04 after a five-year cruise in deep space. The mission phase just prior to this large maneuver is called approach. As navigation team, we were responsible for precise orbit determination of the Juno spacecraft to ensure a successful orbit insertion. To evaluate the navigation performance we employed the B-plane mapping, where the incoming hyperbolic velocity defines the plane perpendicular to it, and the time to go to hit the plane will directly map into the uncertainties of the target point. The B-plane is a convenient tool when assessing the navigation performance as it is not affected by non-linearities due to the gravitational pull of the targeted body. However, as the Jupiter Orbit Insertion approached we started to realize that the B-plane mapping uncertainties were significantly larger than expected. We found that the B-plane mapping time had tremendous influence on the covariance inflation in the B-plane. Because of the close approach distance during the Jupiter Orbit Insertion and the strong interaction with J2 spherical harmonic coefficient, the Juno dynamics were too far from a Keplerian one assumed for the B-plane mapping. We first discuss the analytical approach of the B-plane mapping uncertainty and perform a numerical analysis to isolate the components of the Juno dynamics that cause the B-plane covariance inflation.

Bordi, John↗

NASA NTRS2016

Solar Probe Plus: Unique Navigation Modeling Challenges

The Solar Probe Plus (SPP) mission is preparing to launch in 2018, and will directly investigate the outer atmosphere of our star. At 9.86 solar radii, SPP must operate in an unexplored regime. The environment and aspects of the mission design present some unique challenges for navigation, particularly in terms of modeling the dynamics. Non-gravitational force models, unique to this mission, are given with analytical expressions. For each of these models (and error sources), a maximum bound on the force perturbation magnitude is quantified numerically. Additionally, the effect of charged particles on radiometric observables is discussed, along with methods being employed to pre-process the measurements. This survey is an overview of unique modeling employed by SPP navigation, but also a reference for future missions traveling near the Sun.

Jones, Drew Ryan↗

NASA NTRS2012

Mars Science Laboratory Orbit Determination

Mars Science Laboratory (MSL) Orbit Determination (OD) met all requirements with considerable margin, MSL OD team developed spin signature removal tool and successfully used the tool during cruise, A novel approach was used for the MSL solar radiation pressure model and resulted in a very accurate model during the approach phase, The change in velocity for Attitude Control System (ACS) turns was successfully calibrated and with appropriate scale factor resulted in improved change in velocity prediction for future turns, All Trajectory Correction Maneuvers were successfully reconstructed and execution errors were well below the assumed pre-fight execution errors, The official OD solutions were statistically consistent throughout cruise and for OD solutions with different arc lengths as well, Only EPU-1 was sent to MSL. All other Entry Parameter Updates were waived, EPU-1 solution was only 200 m separated from final trajectory reconstruction in the B-plane

Mars Science Laboratory (MSL)↗

NASA NTRS2012

Cassini Orbit Determination Performance (July 2008 - December 2011)

This paper reports on the orbit determination performance for the Cassini spacecraft from July 2008 to December 2011. During this period, Cassini made 85 revolutions around Saturn and had 52 close satellite encounters. 35 of those were with the massive Titan, 13 with the small, yet interesting, Enceladus as well as 2 with Rhea and 2 with Dione. The period also includes 4 double encounters, where engineers had to plan the trajectory for two close satellite encounters within days of each other at once. Navigation performance is characterized by ephemeris errors relative to in-flight predictions. Most Titan encounters 3-dimensional results are within a 1.5 formal sigma, with a few exceptions, mostly attributable to larger maneuver execution errors. Results for almost all other satellite encounter reconstructions are less than 3 sigma from their predictions. The errors are attributable to satellite ephemerides errors and in some cases to maneuver execution errors.

navigation performance↗

NASA NTRS2012

Stardust-NExT: Lessons Learned from a Comet Flyby Mission

No abstract available

Deep Impact mission↗

NASA NTRS2012

Stardust-next : Lessons Learned from a Comet Flyby Mission

The Stardust-NExT (New Exploration of Tempel) mission, a follow-on to the Stardust prime mission, successfully completed a flyby of comet Tempel-1 on 2/14/11. However there were many challenges along the way, most significantly low propellant margin and detection of the comet in imagery later than antici-pated. These challenges and their ramifications forced the project to respond with flexibility and ingenuity. As a result, the flyby at an altitude of 178 km was nearly flawless, accomplishing all its science objectives. Lessons learned on Stardust-NExT may have relevance to other spacecraft missions.

Tempel 1↗

NASA NTRS2011

Navigating Stardust-NEXT: The Road to Tempel 1

The Stardust-NExT (New Exploration of Tempel) mission, a follow-on to the Stardust prime mission, successfully completed a flyby of comet Tempel-1 on 2/14/11. However there were many challenges along the way in navigating this mission to its successful conclusion, most significantly low propellant margin and detection of the comet in imagery later than anticipated. These challenges and their ramifications forced the navigation team and the project to respond with flexibility and ingenuity. As a result, the resulting flyby at an altitude of 178 km was nearly flawless, accomplishing all its science objectives.

flyby↗

NASA NTRS2010

Mission Enabling and Enhancing Spacecraft Capabilities with MicroNewton Electric Propulsion

The capability to significantly improve current spacecraft pointing, precision orbit maintenance and disturbance mitigation were considered using precision, quiescent microNewton electric propulsion systems. Analysis results showed that electric propulsion systems operating in the microNewton to hundreds of microNewtons thrust range can offer significant improvements over state-of-the-art mission capabilities to enable 30 m Earth-fixed orbital tubes, constellation spacecraft position control to within nanometers and exoplanet observatory pointing with 0.1 milliarcsecond precision. Specific thrust levels and profiles required to support these capabilities are discussed.

micro propulsion↗

NASA NTRS2000

NASA Master Teacher Re-Certification Program

Edward Waters College is submitting a final report covering the grant period from January 1999 - April 30, 2000. The Teacher re-certification program at Edward Waters College created a high quality professional development opportunity for middle and high school science teachers which will contribute to the improvement of science education and the use of innovation technologies in the classroom for years to come. The following goals and objectives were met and exceeded during the grant period. 1) A focused and relevant educational technology curriculum based on National Science Education Standard and state-of-the art educational resources that are accepted as one of the qualifications for re-certification in the scientific discipline in Duval County, Florida. 2) The program goal was to recertify 40 middle and high school science teachers over a two- year period. This goal was met and exceeded the projected number by recertifying over 80 middle and high school science and math teachers over a two-year period. 3) Teachers that were recertified were given an opportunity to public information that they developed on EWC's Web page or develop a web page of their own. Area schools were made aware of this information through various forms of communication with the teachers in Duval County School District, i.e., flyers sent from EWC to participants, school newspapers, word of mouth, etc. 4) A multimedia technology resource lab is available at EWC for use as a "Learning Lab" for class field trips by Duval County teachers.

Okari-Brooks, Emma↗