Search NASA⌕ Search

Engineering topics

Thomson, F.

Publications and source records attributed to Thomson, F..

11 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

The BUTTON-30 detector at Boulby

The BUTTON-30 detector is a 30-tonne technology demonstrator designed to evaluate the potential of hybrid event detection, simultaneously exploiting both Cherenkov and scintillation light to detect particles produced in neutrino interactions. The detector is installed at a depth of 1.1 km in the Boulby Underground Laboratory allowing to test the performance of this new technology underground in a low background environment. This paper describes the design and construction of the experiment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Design and development of optical modules for the BUTTON-30 detector

BUTTON-30 is a neutrino detector demonstrator located in the STFC Boulby underground facility in the north-east of England. The main goal of the project is to deploy and test the performance of the gadolinium-loaded water-based liquid scintillator for neutrino detection in an underground environment. This will pave the way for a future large-volume neutrino observatory that can also perform remote monitoring of nuclear reactors for nonproliferation. This paper describes the design and construction of the watertight optical modules of the experiment.

COMSOL simulations↗
NASA NTRS1981

Data base manipulation for assessment of multiresource suitability and land change

Progress is reported in three tasks which support the overall objectives of renewable resources inventory task of the AgRISTARS program. In the first task, the geometric correction algorithms of the Master Data Processor were investigated to determine the utility of data corrected by this processor for U.S. Forest Service uses. The second task involved investigation of logic to form blobs as a precursor step to automatic change detection involving two dates of LANDSAT data. Some routine procedures for selecting BLOB (spatial averaging) parameters were developed. In the third task, a major effort was made to develop land suitability modeling approches for timber, grazing, and wildlife habitat in support of resource planning efforts on the San Juan National Forest.

Colwell, J.↗
NASA NTRS1975

Machine processing of S-192 and supporting aircraft data: Studies of atmospheric effects, agricultural classifications, and land resource mapping

Two tasks of machine processing of S-192 multispectral scanner data are reviewed. In the first task, the effects of changing atmospheric and base altitude on the ability to machine-classify agricultural crops were investigated. A classifier and atmospheric effects simulation model was devised and its accuracy verified by comparison of its predicted results with S-192 processed results. In the second task, land resource maps of a mountainous area near Cripple Creek, Colorado were prepared from S-192 data collected on 4 August 1973.

Thomson, F.↗
NASA NTRS1973

Remote identification of soil conditions with ratioed multispectral data

Some of the information concerning soils that a multispectral scanner system may provide is discussed, and a practical approach for realizing this potential is suggested. Some reflectance and emittance characteristics of soil surfaces are reviewed, and the feasibility of selectively enhancing contrasts associated with differing soil conditions is demonstrated. The simplicity of the proposed ratio technique, its relative economy, and the compatibility of the image output with conventional survey methods commends it for consideration as an operational method.

Wagner, T. W.↗
NASA NTRS1972

Spectral compositional imaging of silicate rocks.

A technique is presented for the broad-scale mapping of gross compositional differences in silicate rocks from three medium-width (2 to 3 microns) spectral channels of thermal infrared scanner data. Ratios of radiances in two of the channels as measured by a two-element Hg:Cd:Te detector from an altitude of 1000 meters are calculated for 25 silicate rocks. The ratios are shown to be nearly linearly correlated with the position of the centers of gravity of the reststrahlen spectral emissivity features, as measured in the laboratory. Further, the ratios are shown to be generally correlated with SiO2 content of silicate rocks. A third channel is proposed for correction of temperature variations across the scene.

Vincent, R. K.↗
NASA NTRS1972

Post-analysis report on Chesapeake Bay data processing

The additional processing performed on data collected over the Rhode River Test Site and Forestry Site in November 1970 is reported. The techniques and procedures used to obtain the processed results are described. Thermal data collected over three approximately parallel lines of the site were contoured, and the results color coded, for the purpose of delineating important scene constituents and to identify trees attacked by pine bark beetles. Contouring work and histogram preparation are reviewed and the important conclusions from the spectral analysis and recognition computer (SPARC) signature extension work are summarized. The SPARC setup and processing records are presented and recommendations are made for future data collection over the site.

Thomson, F.↗
NASA NTRS1972

Thermal contouring of forestry data: Wallops Island

The contouring of 8-13.5 micrometer thermal data collected over a forestry site in Virginia is described. The data were collected at an altitude of 1000 ft above terrain on November 4, 1970. The site was covered on three approximately parallel lines. The purpose of the contouring was to attempt to delineate pine trees attacked by southern pine bark beetle, and to map other important terrain categories. Special processing steps were required to achieve the correct aspect ratio of the thermal data. The reference for the correction procedure was color infrared photography. Data form and quality are given, processing steps are outlined, a brief interpretation of results is given, and conclusion are presented.

Thomson, F.↗
NASA NTRS1972

Discrimination of fluoride and phosphate contamination in central Florida for analyses of environmental effects

A study was made of the spatial registration of fluoride and phosphate pollution parameters in central Florida by utilizing remote sensing techniques. Multispectral remote sensing data were collected over the area and processed to produce multispectral recognition maps. These processed data were used to map land areas and waters containing concentrations of fluoride and phosphate. Maps showing distribution of affected and unaffected vegetation were produced. In addition, the multispectral data were processed by single band radiometric slicing to produce radiometric maps used to delineate areas of high ultraviolet radiance, which indicates high fluoride concentrations. The multispectral parameter maps and radiometric maps in combination showed distinctive patterns, which are correlated with areas known to be affected by fluoride and phosphate contamination. These remote sensing techniques have the potential for regional use to assess the environmental impact of fluoride and phosphate wastes in central Florida.

Coker, A. E.↗