Engineering topics

Thon, Susanna

Publications and source records attributed to Thon, Susanna.

4 records

DOE OSTI2023

Intra-Grain Local Luminescence Properties of CdSe0.1Te0.9 Thin Films

We report on the local photoluminescence properties of grains and grain boundaries of CdSe 0.1 Te 0.9 thin film deposited by the colossal grain growth method using a wide-field hyperspectral imaging technique. We observed significant variations in the photoluminescence intensity of both individual grains and also that of grain boundaries. Multiple sub-bandgap defect peaks were captured in the luminescence spectra in the energy range 1.2 eV to 1.6 eV. The intensity and peak positions of these sub-gap emissions were slightly different among various grains and at the grain boundaries, revealing intra- and inter-grain variations in these polycrystalline thin films. A recently-developed density-of-states based photoluminescence model was extended to include multiple peaks and was fitted to the data. We observed that at a fixed temperature, the quasi-Fermi level splitting energy and a disordered energy parameter can be extracted locally by use of this model.

data models↗

DOE OSTI2023

Solution–Doped Donor–Acceptor Copolymers Based on Diketopyrrolopyrrole and 3, 3'–Bis (2–(2–(2–Methoxyethoxy) Ethoxy) ethoxy)–2, 2'–Bithiophene Exhibiting Outstanding Thermoelectric Power Factors with p –Dopants

The design of polymeric semiconductors exhibiting high electrical conductivity (σ) and thermoelectric power factor (PF) will be vital for flexible large-area electronics. In this work, four polymers based on diketopyrrolopyrrole (DPP), 2,3-dihydrothieno[3,4-b][1,4]dioxine (EDOT), thieno[3,2-b]thiophene (TT), and 3, 3'-bis (2-(2-(2-methoxyethoxy) ethoxy) ethoxy)-2, 2'-bithiophene (MEET) are investigated as side-chains, with the MEET polymers newly synthesized for this study. These polymers are systematically doped with tetrafluorotetracyanoquinodimethane ( F 4 TCNQ), CF3SO3H, and the synthesized dopant Cp(CN) 3 -(COOMe) 3 , differing in geometry and electron affinity. The DPP-EDOT-based polymer containing MEET as side-chains exhibits the highest conductivity (σ) ≈700 S cm–1 in this series with the acidic dopant (CF 3 SO 3 H). This polymer also shows the lowest oxidation potential by cyclic voltammetry (CV), the strongest intermolecular interactions evidenced by differential scanning calorimetry (DSC), and has the most oxygen-based functionality for possible hydrogen bonding and ionic screening. Other polymers exhibit high σ ≈300–500 S cm–1 and power factor up to 300 µW m –1 K –2 . The mechanism of conductivity is predominantly electronic, as validated by time-dependent conductance studies and transient thermo voltage monitoring over time, including for those doped with the acid. Furthermore, these materials maintain significant thermal stability and air stability over ≈6 weeks. Density functional theory calculations reveal molecular geometries and inform about frontier energy levels. Raman spectroscopy, in conjunction with scanning electron microscopy (SEM-EDS) and x-ray diffraction, provides insight into the solid-state microstructure and degree of phase separation of the doped polymer films. Infrared spectroscopy enables this study to further quantify the degree of charge transfer from polymer to dopant.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Stable High‐Conductivity Ethylenedioxythiophene Polymers via Borane‐Adduct Doping

Efficient doping of polymer semiconductors is required for high conductivity and efficient thermoelectric performance. Lewis acids, e.g., B(C 6 F 5 ) 3 , have been widely employed as dopants, but the mechanism is not fully understood. 1:1 “Wheland type” or zwitterionic complexes of B(C 6 F 5 ) 3 are created with small conjugated molecules 3,6-bis(5-(7-(5-methylthiophen-2-yl)-2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)thiophen-2-yl)-2,5-dioctyl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione [oligo_DPP(EDOT) 2 ] and 3,6-bis(5''-methyl-[2,2':5',2''-terthiophen]-5-yl)-2,5-dioctyl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione [oligo_DPP(Th) 2 ]. Using a wide variety of experimental and computational approaches, the doping ability of these Wheland Complexes with B(C 6 F 5 ) 3 are characterized for five novel diketopyrrolopyrrole-ethylenedioxythiophene (DPP-EDOT)-based conjugated polymers. The electrical properties are a strong function of the specific conjugated molecule constituting the adduct, rather than acidic protons generated via hydrolysis of B(C 6 F 5 ) 3 , serving as the oxidant. It is highly probable that certain repeat units/segments form adduct structures in p -type conjugated polymers which act as intermediates for conjugated polymer doping. Electronic and optical properties are consistent with the increase in hole-donating ability of polymers with their cumulative donor strengths. The doped film of polymer (DPP(EDOT) 2 -(EDOT) 2 ) exhibits exceptionally good thermal and air-storage stability. The highest conductivities, ≈300 and ≈200 S cm -1 , are achieved for DPP(EDOT) 2 -(EDOT) 2 doped with B(C 6 F 5 ) 3 and its Wheland complexes.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Maximized Hole Trapping in a Polystyrene Transistor Dielectric from a Highly Branched Iminobis(aminoarene) Side Chain

We synthesized highly branched and electron donating side chain subunits and attached them to polystyrene (PS) used as a dielectric layer in a pentacene field effect transistor. The influence of these groups on dielectric function, charge retention and threshold voltage shifts (ΔV th ) depending on their positions in dielectric multilayers was determined. We compared the observations made on an N-perphenylated iminobisaniline side chain with those from the same side chains modified with ZnO nanoparticles and with an adduct formed from tetracyanoethylene (TCNE). We also synthesized an analogue in which six methoxy groups are present instead of two amine nitrogens. At 6 mol % side chain, hopping transport was sufficient to cause shorting of the gate, while at 2 mol %, charge trapping was observable as transistor threshold voltage shifts (ΔV th ). Here, we created three types of devices: with the substituted PS layer as single layer dielectric, on top of a crosslinked PS layer but in contact with the pentacene (bilayers), and sandwiched between two PS layers in trilayers. Particularly large bias stress effects and ΔV th , larger than the hexamethoxy and previously studied dimethoxy analogs, were observed in the second case and the effects increased with the increasing electron donating properties of the modified side chains. The highest ΔV th was consistent with a majority of the side chains stabilizing trapped charge. Trilayer devices showed decreased charge storage capability compared to previous work in which we used less donating side chains but in higher concentrations. The ZnO and TCNE modifications resulted in slightly more and less negative ΔV th , respectively, when the side chain polystyrene was not in contact with the pentacene and isolated from the gate electrode. The results indicate a likely maximum combination of molecular charge stabilizing activity and side chain concentration that still allows gate dielectric function.

36 MATERIALS SCIENCE↗