Editorial: Hydrothermal Liquefaction: Aqueous Phase Treatment, Product Recovery, and Downstream Implications
Editorial article for Frontiers - No Abstract.
htl aqueous↗
Engineering topics
Thorson, Michael R.
Publications and source records attributed to Thorson, Michael R..
Solvent processing for improved separation of hydrothermal liquefaction products
Solvent extraction and separation of HTL products using naphtha range hydrocarbons was studied with the aim of decreasing operational hazards while improving scalability, reliability, and yields.
09 BIOMASS FUELS↗
Aqueous-phase product treatment and monetization options of wet waste hydrothermal liquefaction: Comprehensive techno-economic and life-cycle GHG emission assessment unveiling research opportunities
While wet waste hydrothermal liquefaction technology has a high biofuel yield, a significant amount of the carbon and nitrogen in the feedstock reports to the aqueous-phase product. Pretreatment of this stream before sending to a conventional wastewater plant is essential or at the very least, advisable. In this work, techno-economic and life-cycle assessments were conducted for the state-of-technology baseline and four aqueous-phase product treatment and monetization options based on experimental data. Further, these options can cut minimum fuel selling prices by up to 13 % and life-cycle greenhouse gas emissions by up to 39 % compared to the baseline. These findings highlight the substantial influence of aqueous produce treatment strategies on the entire wet waste hydrothermal liquefaction process, demonstrating the potential for optimizing economic viability and environmental impact through further research and development of milder treatment methods and diversified by-product valorization pathways.
09 BIOMASS FUELS↗
Integration of Autothermal Oxidation into Hydrothermal Liquefaction
This report examines incorporating a mild oxidation process, in traditional Hydrothermal Liquefaction (HTL). The focus is on improving efficiency through heat recovery and autothermal operations. In WAO, pressurized and heated sludge, mixed with air, undergoes combustion reactions, generating CO 2 and other gases. A novel aspect is using reactor effluent heat to pre-heat incoming sludge, minimizing energy needs and enabling autothermal reactions at specific solids concentrations. The report discusses many advantages of this embodiment of the HTL process, which could eliminate heat exchangers by leveraging heat from oxidation. This approach simplifies operations.
09 BIOMASS FUELS↗
Hydrothermal liquefaction system
A hydrothermal liquefaction (HTL) system can comprise a biomass slurry source, a first pump in fluid communication with the slurry source and configured to pressurize a biomass slurry stream from the slurry source to a first pressure, a first heat exchanger in fluid communication with the first pump and configured to heat a slurry stream received from the first pump to a first temperature, a second pump in fluid communication with the first heat exchanger and configured to pressurize a slurry stream received from the first heat exchanger to a second pressure higher than the first pressure, a second heat exchanger in fluid communication with the second pump and configured to heat a slurry stream received from the second pump to a second temperature higher than the first temperature, and a HTL reactor configured to produce biocrude from a slurry stream received from the second heat exchanger.
Thorson, Michael R.↗
Desalting biocrude for improved downstream processing toward marine fuel application
Hydrothermal liquefaction of wet wastes (e.g., food waste and sewage sludge) offers a promising avenue for producing biocrude, but the resulting product is often contaminated with metals and water, impacting the biocrude upgrading steps to produce final fuel (e.g., jet and diesel). Here this study investigates the use of aqueous solutions of formic acid for desalting biocrudes and improving their quality. The results show that this approach significantly reduces both metal and water content, enabling mild hydrotreatment with reduced hydrogen consumption to further enhance the biocrude's quality. A preliminary technoeconomic analysis based on these experimental results shows that even without optimization, this washing process can yield biocrude with a minimum selling price of $1.87/GGE. Overall, our study demonstrates the potential for using dilute formic acid aqueous solutions to improve the quality of biocrudes, which can lead to more efficient and cost-effective conversion into biofuels.
09 BIOMASS FUELS↗
Uncertainty analysis for techno-economic and life-cycle assessment of wet waste hydrothermal liquefaction with centralized upgrading to produce fuel blendstocks
Wet waste hydrothermal liquefaction is a promising technology for producing transportation fuels with much lower greenhouse gases emissions than petroleum-based fuels. However, its techno-economic and life cycle assessment are primarily based on laboratory scale testing data, subject to considerable uncertainties, and even bias, due to knowledge gaps. Here, a preliminary uncertainty analysis of key economic measures was conducted based on the 2019 state-of-technology model for biocrude production. Building on the preliminary analysis, this work presents a comprehensive uncertainty analysis in both economic and environmental measures of the entire supply chain of wet waste hydrothermal liquefaction to fuel blendstocks including biocrude upgrading based on the 2021 state-of-technology model. The analysis includes the most recent developments in hydrothermal liquefaction and biocrude upgrading technologies and Monte Carlo simulation based on an integrated model system including an improved reactor yield model, reduced-order process model, discounted cash flow economic model and simplified life-cycle assessment model. The estimated biocrude yield ranges from 42.2% to 52.4% with a median of 47.3%. The estimated fuel yield ranges from 34.7% to 42.7% with a median of 38.7%. The estimated minimum fuel selling price ranges from $\$ $2.28/gge to $\$ $3.45/gge with a median of $\$ $2.80/gge. Relative to petroleum-derived diesel, the estimated reduction in supply chain greenhouse gas emissions ranges from 73.4% to 81.8% with a median of 77.7%. Compared to the 2019 state-of-technology analysis, a significant improvement in biocrude selectivity and economic measures and reduction in uncertainties were achieved due to the incorporation of additional continuous experimental data sets, technology development and de-risking, and improvement in model accuracy.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗