Search NASASearch

Engineering topics

Throckmorton, David A.

Publications and source records attributed to Throckmorton, David A..

Second Generation RLV Space Vehicle Concept

NASA has a long history of conducting development programs and projects in a consistent fashion. Systems Engineering within those programs and projects has also followed a given method outlined by such documents as the NASA Systems Engineering Handbook. The relatively new NASA Space Launch Initiative (SLI) is taking a new approach to developing a space vehicle, with innovative management methods as well as new Systems Engineering processes. With the program less than a year into its life cycle, the efficacy of these new processes has yet to be proven or disproven. At $776M for phase 1, SLI represents a major portion of the NASA focus; however, the new processes being incorporated are not reflected in the training provided by NASA to its engineers. The NASA Academy of Program and Project Leadership (APPL) offers core classes in program and project management and systems engineering to NASA employees with the purpose of creating a "knowledge community where ideas, skills, and experiences are exchanged to increase each other's capacity for strong leadership". The SLI program is, in one sense, a combination of a conceptual design program and a technology program. The program as a whole doesn't map into the generic systems engineering project cycle as currently, and for some time, taught. For example, the NASA APPL Systems Engineering training course teaches that the "first step in developing an architecture is to define the external boundaries of the system", which will require definition of the interfaces with other systems and the next step will be to "define all the components that make up the next lower level of the system hierarchy" where fundamental requirements are allocated to each component. Whereas, the SLI technology risk reduction approach develops architecture subsystem technologies prior to developing architectures. The higher level architecture requirements are not allowed to fully develop and undergo decomposition and allocation down to the subsystems before the subsystems must develop allocated requirements based on the highest level of requirements. In the vernacular of the project cycles prior to the mid 1990's, the architecture definition portion of the program appears to be at a generic Phase A stage, while the subsystems are operating at Phase B. Even the management structure of the SLI program is innovative in its approach to Systems Engineering and is not reflected in the APPL training modules. The SLI program has established a Systems Engineering office as an office separate from the architecture development or the subsystem technology development, while that office does have representatives within these other offices. The distributed resources of the Systems Engineering Office are co-located with the respective Project Offices. This template is intended to provide systems engineering as an integrated function at the Program Level. the program management of SLI and the MAT agree that "program/project managers and the systems engineering team must work closely together towards the single objective of delivering quality products that meet the customer needs". This paper will explore the differences between the methods being taught by NASA, which represent decades of ideas, and those currently in practice in SLI. Time will tell if the innovation employed by SLI will prove to be the model of the future. For now, it is suggested that the training of the present exercise the flexibility of recognizing the new processes employed by a major new NASA program.

Bailey, Michelle

Structural Loads Test Measurement Acquisition System (SLTMAS)

This presentation package, a PowerPoint presentation, will be presented at NASA's Sixteenth Annual Continual Improvement and Reinvention Conference as part of an Agency level competition highlighting continual improvements within NASA. The presentation provides a brief overview of the process used to improve the Structural and Dynamics Testing Group's data acquisition capabilities. Results measuring the success of the improvement cycle for the PC based SLTMAS will be presented.

Patterson, Alan

Shuttle orbiter experiments: Use of an operational vehicle for advancement and validation of space systems design technologies

The NASA Orbiter Experiments (OEX) Program provided a mechanism for utilization of an operational space shuttle orbiter as a flight research vehicle, as an adjunct to its normal space transportation mission. OEX Program experiments were unique among orbiter payloads, as the research instrumentation for these experiments were carried as integral parts of the vehicle's structure, rather than being placed in the orbiter's payload bay as mission-unique cargo. On each of its first 17 flights, the Orbiter Columbia carried some type of research instrumentation. Various instrumentation systems were used to measure, in flight, the requisite parameters for determination of the orbiter aerodynamic characteristics over the entire entry flight regime and/or the aerodynamic-heating rates imposed upon the vehicle during the hypersonic portion of atmospheric entry. The data derived from this instrumentation represent benchmark hypersonic flight data heretofore unavailable for a lifting entry vehicle. The data are being used in a continual process of validation of state-of-the-art methods, both experimental and computational, for simulating/predicting the aerodynamic and aerothermal characteristics of advanced space transportation vehicles. This paper describes the OEX Program complement of research experiments, presents typical flight data obtained by these experiments, and demonstrates the utilization of these data for advancement and validation of vehicle aerothermodynamic-design tools. By example, the concept of instrumenting operational vehicles and/or spacecraft in order to perform advanced technology development and validation is demonstrated to be an effective and economical method for maturing space-systems design technologies.

Holloway, Paul F.

Shuttle entry aerothermodynamic flight research - The Orbiter Experiments (OEX) Program

Results of the OEX program are summarized with emphasis on the information on entry aerothermodynamic phenomena derived from Space Shuttle operations. The discussion focuses on OEX experiment complement and operational history, freestream environment and vehicle attitude data, aerodynamic force and moment data, aerodynamic surface data, and vehicle configuration data. Attention is also given to orbiter aerodynamic performance, stability and control, high-altitude atmospheric density variability, direct simulation Monte Carlo validation, orbital drag variation, and computational fluid dynamic technique validation.

Throckmorton, David A.

Shuttle Infrared Leeside Temperature Sensing (SILTS) experiment - STS-35 and STS-40 preliminary results

Preliminary results from the STS-35 and STS-40 flight of the Shuttle Infrared Leeside Temperature Sensing (SILTS) experiment aboard the Shuttle Orbiter Columbia are presented. Infrared images are shown in false-color indicating the level and distribution of surface temperature over the vehicle's leeside fuselage during entry. Features evident in the imagery are related to their causative aerodynamic flow phenomena. Quantitative comparisons of the infrared image data with in situ temperature measurements obtained with thermocouples located at the aerodynamic surface of the thermal protection materials are presented.

Throckmorton, David A.

The Orbiter Experiments (OEX) Program

The objective of the Orbiter Experiments (OEX) program is to obtain research quality flight data for the augmentation and advancement of space transportation technologies. This includes the validation and advancement of analytical theories and of ground-test methods and techniques. The following topics are discussed: aerothermodynamic design tool development and validation; the freestream environment; trajectory reconstruction; atmospheric reconstruction; the Shuttle Entry Air Data System (SEADS); the Shuttle Upper Atmosphere Mass Spectrometer (SUMS); and aerodynamic forces and moments. The discussion is presented in vugraph form.

Throckmorton, David A.

Shuttle Infrared Leeside Temperature Sensing (SILTS) experiment - STS-28 preliminary results

Preliminary results from the STS-28 flight of the Shuttle Infrared Leeside Temperature Sensing (SILTS) experiment aboard the Shuttle Orbiter Columbia are presented. Infrared images are shown in false-color indicating the level and distribution of surface temperature on the leeside of the left wing during entry. Features evident in the imagery are related to their causative aerodynamic flow phenomena. Quantitative comparisons of the infrared image data with in situ temperature measurements obtained with thermocouples located at the aerodynamic surface of the thermal protection system materials are presented.

Throckmorton, David A.

Shuttle Infrared Leeside Temperature Sensing (SILTS) experiment - STS 61-C results

The operation of the Shuttle Infrared Leeside Temperature Sensing experiment on mission STS 61-C of the Space Shuttle Orbiter Columbia is described. False-color video images are shown of surface temperatures on the leeside wing and fuselage areas during entry. Features evident in the imagery are related to aerodynamic flow phenomena such as shock interactions, leeside vortices, and elevon gap effects. Significant anomalies in experiment hardware operation occurred on this flight. The anomalous hardware performance resulted in requirements for major modification to the postflight data reduction procedures. The data collected provide a qualitative, but not a fully quantitative, look at leeside surface heating.

Throckmorton, David A.