Search NASA⌕ Search

Engineering topics

Thurber, Travis

Publications and source records attributed to Thurber, Travis.

At least 19 records

Energy and AI: Evaluating Future Grid and Water Stress Due to Data Centers

Projections of the need for new data centers to support Artificial Intelligence (AI) are large but highly uncertain. Recent projections indicate up to a 15% annual growth rate in data center electricity demand within the next 5-10 years. Given that most electric utilities are required to have a reserve margin of roughly the same magnitude as the projected growth in demand, these new data center loads could soon threaten resource adequacy and reliability unless data centers build their own generation, interruptible loads are negotiated, commensurate new capacity and/or transmission is built, or some combination of these options. Similarly, depending on the cooling technology and geographic location of new data centers, they could threaten water adequacy in water scarce regions. This presentation highlights the grid and water implications of new data centers to support AI.

Mongird, Kendall (ORCID:0000000328077088)↗

High Resolution Siting Suitability of Various Power Plant Technologies

Energy sector planning models determine the aggregate need for new generation, but these models are typically at the state or regional scale and are not equipped to address the wide range of location- and technology-specific issues that are increasingly a factor in power plant siting. These animations demonstrate the aggregate siting suitability of various power plant technology configurations, considering technology-specific factors that can prohibit development. The data presented is from the GRIDCERF (Geospatial Raster Input Data for Capacity Expansion Regional Feasibility) data package. GRIDCERF is a harmonized, open-source geospatial product that can be used to evaluate siting suitability for renewable and non-renewable power plants in the conterminous United States. The animations presented here demonstrate a curated selection of the full suite of technology configurations available. GRIDCERF provides the necessary inputs for models that simulate power plant siting for regional capacity expansion planning such as the Capacity Expansion Regional Feasibility (CERF) model.

Mongird, Kendall [Pacific Northwest National Labor↗

WRF-ELM v1.0: a regional climate model to study land–atmosphere interactions over heterogeneous land use regions

Abstract. The Energy Exascale Earth System Model (E3SM) Land Model (ELM) is a state-of-the-art land surface model that simulates the intricate interactions between the terrestrial land surface and other components of the Earth system. Originating from the Community Land Model (CLM) version 4.5, ELM has been under active development, with added new features and functionality, including plant hydraulics, radiation–topography interaction, subsurface multiphase flow, and more explicit land use and management practices. This study integrates ELM v2.1 with the Weather Research and Forecasting (WRF; WRF-ELM) model through a modified Lightweight Infrastructure for Land Atmosphere Coupling (LILAC) framework, enabling affordable high-resolution regional modeling by leveraging ELM's innovative features alongside WRF's diverse atmospheric parameterization options. This framework includes a top-level driver for variable communication between WRF and ELM and Earth System Modeling Framework (ESMF) caps for the WRF atmospheric component and ELM workflow control, encompassing initialization, execution, and finalization. Importantly, this LILAC–ESMF framework demonstrates a more modular approach compared to previous coupling efforts between WRF and land surface models. It maintains the integrity of ELM's source code structure and facilitates the transfer of future developments in ELM to WRF-ELM. To test the ability of the coupled model to capture land–atmosphere interactions over regions with a variety of land uses and land covers, we conducted high-resolution (4 km) WRF-ELM ensemble simulations over the Great Lakes region (GLR) in the summer of 2018 and systematically compared the results against observations, reanalysis data, and WRF-CTSM (WRF coupled with the Community Terrestrial Systems Model). In general, the coupled WRF-ELM model has reasonably captured the spatial distribution of surface state variables and fluxes across the GLR, particularly over the natural vegetation areas. The evaluation results provide a baseline reference for further improvements in ELM in the regional application of high-resolution weather and climate predictions. Our work serves as an example to the model development community for expanding an advanced land surface model's capability to represent fully-coupled land–atmosphere interactions at fine spatial scales. The development and release of WRF-ELM marks a significant advancement for the ELM user community, providing opportunities for fine-scale regional representation, parameter calibration in coupled mode, and examination of new schemes with atmospheric feedback.

54 ENVIRONMENTAL SCIENCES↗

The Capacity Expansion Regional Feasibility (CERF) Model: High-Resolution Power Plant Siting

Abstract This presentation gives an overview of the geospatial power plant siting model CERF. CERF (Capacity Expansion Regional Feasibility) is an open source Python package developed under the Integrated Multisector Multiscale Modeling (IM3) Project at PNNL. This presentation covers an overview of how the CERF model works, walks through various power plant siting analyses, and discusses future research opportunities for the model. The CERF model can be accessed at https://github.com/IMMM-SFA/cerf. PNNL Information Release Number: PNNL-SA-207336 Acknowledgment IM3 is a multi-institutional effort led by Pacific Northwest National Laboratory and supported by the U.S. Department of Energy's Office of Science as part of research in MultiSector Dynamics, Earth and Environmental Systems Modeling Program.

Mongird, Kendall [Pacific Northwest National Labor↗

Future North Atlantic tropical cyclone intensities in thermodynamically modified historical environments

Tropical cyclones (TCs) rank as the deadliest and most financially crippling natural disasters in the United States for the last half-century. It is imperative to assess potential shifts in TC intensity within the paradigm of an evolving climate. In this study, we have modeled the intensities of 620 historical TC events in the North Atlantic Basin using the Risk Analysis Framework for Tropical Cyclones (RAFT)'s deep learning intensity model. By applying a thermodynamic warming signal extrapolated from Global Climate Models, we rerun historical events under eight different future climate scenarios, providing a spectrum of potential TC intensity outcomes. One of the future simulations indicates a staggering 43% increase in the number of major hurricanes, underscoring the critical impact of climate change on TC intensity. Additionally, an interactive dashboard has been created to enable users to explore individual storm simulations and understand the influence of future climate signals on environmental conditions of TC development and resulting TC intensities. This dataset and the user-friendly tool offer invaluable resources for systematic exploration of the discrete effects that changes in the air-sea thermodynamic state have on the intensities of TCs.

Climate Change↗

statemodify: a Python framework to facilitate accessible exploratory modeling for discovering drought vulnerabilities

The Colorado River Basin (CRB) is experiencing an unprecedented water shortage crisis brought upon by a combination of factors arising from interactions across the region’s coupled human and natural systems. Allocation of water to the seven states that rely on the Colorado River was settled in the Colorado River Compact of 1922 during a period now known to be characterized by atypically high flows (Christensen et al., 2004). Since then, aridification due to anthropogenic-driven warming has steadily reduced the overall water supply available in the basin, with a 10% decrease in the river’s flow occurring over just the past two decades (Bass et al., 2023). The river is further strained by increasing demands associated with a growing population and diverse multi-sectoral demands. Navigating these challenges also requires accounting for the complex prior appropriation water rights system governing water allocation across the region’s diverse users.

54 ENVIRONMENTAL SCIENCES↗

GRIDCERF - Geospatial Raster Input Data for Capacity Expansion Regional Feasibility

The Geospatial Raster Input Data for Capacity Expansion Regional Feasibility (GRIDCERF) data package is a high-resolution product to evaluate siting suitability for renewable and non-renewable power plants in the conterminous United States. GRIDCERF offers hundreds of individual suitability layers for use with both renewable and non-renewable power plant technology configurations in a harmonized format that can be easily ingested by geospatially-enabled modeling software. It also provides pre-compiled technology-specific suitability layers and allows for user customization to robustly address science objectives when evaluating varying future conditions. GRIDCERF data can be directly used with the CERF (Capacity Expansion Regional Feasibility) model to site power plants at a 1km resolution. GRIDCERF includes composite technology siting suitability raster layers for the following utility scale technology configurations. Note that, in addition to technology sub-types shown below, various cooling types are also included (recirculating, pond, once-through, recirculating-seawater, dry-hybrid, or dry) for various technologies. Biomass Conventional (with or without CCS) IGCC (with or without CCS) Coal Conventional (with or without CCS) IGCC (with or without CCS) Natural Gas Combined-cycle (CC) (with or without CCS) Turbine Geothermal Enhanced Geothermal Systems (EGS) - Class 1 through Class 5 resource potential Nuclear Gen 2 Light Water Reactor (LWR) Gen 3 Small Modular Reactor (SMR) Gen 3 AP1000 Refined Liquids Combined-cycle (CC) (with or without CCS) Turbine Solar Photovoltaic (PV) - for capacity factors in the range of 6-18% Utility-scale Concentrating Solar Power (CSP) - for capacity factors in the range of 24-46% Tower Wind (Onshore) - for capacity factors in the range of 5-50% 80m hub height 100m hub height 120m hub height 140m hub height Wind (Offshore) - for capacity factors in the range of 25-60% 100m hub height 140m hub height 160m hub height

capacity expansion↗

Data for "Divergent urban land trajectories under alternative population projections within the shared socioeconomic pathways"

Datasets supporting findings and visualizations behind McManamay et al. (2024) Divergent urban land trajectories under alternative population projections within the shared socioeconomic pathways. Environmental Research Letters, DOI: 10.1088/1748-9326/ad2eec Using a spatial modeling experiment at high resolution (1-km), this study compared how two alternative US population projections, varying in the spatially explicit nature of demographic patterns and migration, affect urban land dynamics simulated by the Spatially Explicit, Long-term, Empirical City development (SELECT) model for SSP2, SSP3, and SSP5. The numerical experiment, inputs and outputs are fully described in McManamay et al. (2024). The datasets summarize SELECT model simulations within urban areas and rural areas of the conterminous United States. For code to reproduce the results, please refer to https://github.com/IMMM-SFA/mcmanamay_etal_2024_erl Please refer to the README file provided in Files for more details. Descriptions of the datasets are provided below. Dataset(s) Descriptions: Urban_Land_delta_UA_County.csv: Urban land area for original (default) population, updated population, and urban land delta (difference between the two) according to Shared Socioeconomic Pathways (SSPs) and year. Urban land is summarized for U.S. counties (FIPS code) and urban areas (GEOID) as unique areas within various counties. JO_Gao_pop_ufdelta.csv: Comparison of population differences and urban land differences between the origial (default) and updated population projections. City_Case_studies.csv: Differences in urban land areas arising from different population projections summarized for selected cities (Atlanta, Los Angeles, Houston, and New York) and their surrounding rural areas UA_county_FID.zip: Zipped folder of .tiff file depicting unique combination of urban areas and US counties used for summarizing urban land differences in urban and rural areas based on different population projections. ULD_clusters.zip: Zipped folder of .csv files depicting normalized changes in urban land delta (difference in urban land arising from population projections) and the respective Ward's hierarchical clusters, which group urban and rural areas based on similarities in temporal trends. Urban_Percent_change_2100.zip: Zipped folder of .csv files depicting percent changes in urban land area for year 2100 based on differences in the original (default) population and updated population. Each file is for SSPs and urban or rural areas.

Land↗

Representing farmer irrigated crop area adaptation in a large-scale hydrological model

Abstract. Large-scale hydrological models (LHMs) are commonly used for regional and global assessment of future water shortage outcomes under climate and socioeconomic scenarios. The irrigation of croplands, which accounts for the lion's share of human water consumption, is critical in understanding these water shortage trajectories. Despite irrigation's defining role, LHM frameworks typically impose trajectories of land use that underlie irrigation demand, neglecting potential dynamic feedbacks in the form of human instigation of and subsequent adaptation to water shortages via irrigated crop area changes. We extend an LHM, MOSART-WM, with adaptive farmer agents, applying the model to the continental United States to explore water shortage outcomes that emerge from the interplay between hydrologic-driven surface water availability, reservoir management, and farmer irrigated crop area adaptation. The extended modeling framework is used to conduct a hypothetical computational experiment comparing differences between a model run with and without the incorporation of adaptive farmer agents. These comparative simulations reveal that accounting for farmer adaptation via irrigated crop area changes substantially alters modeled water shortage outcomes, with US-wide annual water shortages being reduced by as much as 42 % when comparing adaptive and non-adaptive versions of the model forced with US climatology from the period 1950–2009.

54 ENVIRONMENTAL SCIENCES↗

Advancing uncertainty characterization for understanding projected water scarcity in multi-sector, multi-actor river basins across scales.

Invited Talk at AGU Fall Meeting 2023 Modeling how human institutions and infrastructure interact with the water cycle is essential to better understand the vulnerability, and resilience of water resources systems from the local to the global scale. This is especially true when investigating multi-sector, multi-actor responses to the effects of long-term changes and short-term shocks. It is also well recognized that uncertainty present throughout the modeling cycle (e.g., in data, functional relations, and model coupling approaches) limits our ability to trace the interactive dynamics of human-water systems, as well as to quantify their implications for management and planning. Systems with large numbers of diverse stakeholders further compound this challenge, as uncertain drivers and complex dynamics might have very disparate effects on water users. The work presented is conducted through the Integrated Multisector Multiscale Modeling (IM3) Science Focus Area, which explores how human and natural systems co-evolve in response to change. Through this multi-year effort, we have developed exploratory modeling methods to better characterize how the uncertain human and natural drivers of water scarcity yield consequential vulnerabilities in institutionally complex, multi-sectoral systems. This talk will specifically present on a series of uncertainty characterization experiments performed in the Upper Colorado River Basin, a sub-basin of the Colorado with thousands of water users. These complementary and systematic experiments are aimed at understanding: How are various uncertain stressors (e.g., climate change, demand growth) affecting the diverse water users of this basin in terms of water shortage? What are the key drivers of this shortage for each user? Methods and results from this work are used to address additional questions on the ability of adaptation to modulate the effects of these uncertain drivers, and on their compounding effects across spatial scales and through sectoral interactions.

Hadjimichael, Antonia↗

Data for Hadjimichael et al. - Multi-actor, multi-impact scenario discovery

Naming convention for each file is S[scenario_id]_[realization_id].parquet All realizations are generated as per the accompanying paper: Hadjimichael, A., Reed, P.M., Quinn, J.D, Vernon, C.R., Thurber, T., Multi-actor, multi-impact scenario discovery of consequential narrative storylines for human-natural systems planning. Earth's Future (In Review) Each .parquet file contains the following columns: 'structure_id' : StateMod structure ID data corresponds to 'year': simulation year 'month': simulation month 'demand': water demand in acre-feet 'shortage': water shortage in acre-feet 'river_outflow': streamflow in diversion location in acre-feet 'control_location': other structure or reason for shortage

Hadjimichael, Antonia↗

mosartwmpy sample input data; 1980 - 1985

Sample input data spanning the years 1980-1985 for running the `mosartwmpy` water routing and management model: https://github.com/IMMM-SFA/mosartwmpy. More information is available in the README.md. Changelog: v0.0.7: new reservoir files with corrected locations based on an exhaustive review by Dan Broman for the 9505 project; corresponding long term mean demand and flow files updated based on VIC4 simulations using Daymet forcing. v0.0.6: updates reservoir parameters to indicate which reservoirs should follow generic operating rules and which should follow ISTARF data-driven operating rules. v0.0.5: adds supporting files for running the Farmer Agent Based Model of adaptive water demand.

Rexer, Emily↗

Projections of Hourly Meteorology by Balancing Authority Based on the IM3/HyperFACETS Thermodynamic Global Warming (TGW) Simulations

This dataset contains 40 years (1980-2019) of historical hourly meteorology and 80 years (2020-2099) of projected hourly meteorology for 54 Balancing Authorities (BAs) in the conterminous United States. Details about the scenarios and variables included in this dataset are in the readme.pdf file. This dataset is derived from the IM3/HyperFACETS Thermodynamic Global Warming (TGW) simulations (https://doi.org/10.57931/1885756). More details on the TGW approach can be found at: https://tgw-data.msdlive.org/. If you use this dataset please also cite the raw TGW dataset (Jones, A. D., Rastogi, D., Vahmani, P., Stansfield, A., Reed, K., Thurber, T., Ullrich, P., & Rice, J. S. (2022). IM3/HyperFACETS Thermodynamic Global Warming (TGW) Simulation Datasets (v1.0.0) [Data set]. MSD-LIVE Data Repository. https://doi.org/10.57931/1885756). To go from the TGW data to these BA-level aggregated data we first averaged the raw gridded data by county in the United States. That intermediate data step is also stored in MSD-LIVE (https://doi.org/10.57931/1960548). We then population-weight the county-level hourly data in order to create population-weighted meteorology time series for each BA. Historical populations are from the United States Census Bureau and the evolving future populations are based on Shared Socioeconomic Pathways (SSPs) 3 and 5. The four climate scenarios crossed with the two SSPs yield eight different future projections for each BA: rcp45cooler_ssp3, rcp45cooler_ssp5, rcp45hotter_ssp3, rcp45hotter_ssp5, rcp85cooler_ssp3, rcp85cooler_ssp5, rcp85hotterssp3, rcp85hotterssp5. For the historical period and each of the eight future scenarios the dataset has hourly estimates of the population-weighted average of five meteorological variables: Temperature, specific humidity, shortwave radiation, longwave radiation, and wind speed. All times are in Coordinated Universal Time (UTC). The code to go from the raw TGW data to county-level and then BA-level projections is available at: https://github.com/IMMM-SFA/im3components/tree/main/im3components/wrf_to_tell.

Balancing Authority↗

Projections of Hourly Meteorology by County Based on the IM3/HyperFACETS Thermodynamic Global Warming (TGW) Simulations

This dataset contains 40 years (1980-2019) of historical hourly meteorology and 80 years (2020-2099) of projected hourly meteorology for each county in the conterminous United States. Details about the scenarios and variables included in this dataset are in the readme.pdf file. This dataset is derived from the IM3/HyperFACETS Thermodynamic Global Warming (TGW) simulations (https://doi.org/10.57931/1885756). More details on the TGW approach can be found at: https://tgw-data.msdlive.org/. If you use this dataset please also cite the raw TGW dataset (Jones, A. D., Rastogi, D., Vahmani, P., Stansfield, A., Reed, K., Thurber, T., Ullrich, P., & Rice, J. S. (2022). IM3/HyperFACETS Thermodynamic Global Warming (TGW) Simulation Datasets (v1.0.0) [Data set]. MSD-LIVE Data Repository. https://doi.org/10.57931/1885756). The four future climate scenarios in the TGW data are: rcp45cooler, rcp45hotter, rcp85cooler, and rcp85hotter. For the historical period and each of the four future scenarios the dataset has hourly estimates of the spatial-average of six meteorological variables for each county: Temperature, specific humidity, shortwave radiation, longwave radiation, and the U (east-west) and V (north-south) components of the wind speed. Times for each file are in the filename and all times are in Coordinated Universal Time (UTC). Counties are identified by their Federal Information Processing Standard (FIPS) code. The mapping between counties and FIPS codes is provided in the state_and_county_fips_codes.csv file. The code to go from the raw TGW data to county-level projections is available at: https://github.com/IMMM-SFA/im3components/tree/main/im3components/wrf_to_tell.

County↗

mosartwmpy sample input data; 1980 - 1985

Sample input data spanning the years 1980-1985 for running the `mosartwmpy` water routing and management model: https://github.com/IMMM-SFA/mosartwmpy. More information is available in the README.md. Changelog: v0.0.6: updates reservoir parameters to indicate which reservoirs should follow generic operating rules and which should follow ISTARF data-driven operating rules. v0.0.5: adds supporting files for running the Farmer Agent Based Model of adaptive water demand.

Rexer, Emily↗

CLM5 CAMELS Basins Ensemble

Land surface models such as Community Land Model Version 5 (CLM5) are essential tools for simulating the behaviors of the terrestrial system. Despite the extensive application of CLM5, limited attention has been paid to the underlying uncertainties associated with its hydrologic parameters and the implications that these uncertainties have on water resources applications. To address this long-standing issue, we conduct a comprehensive hydrologic parameter uncertainty characterization (UC) of CLM5 over the hydroclimatic gradients of the Conterminous United States using five meteorological datasets. Key datasets produced from the UC experiment include a benchmark dataset of CLM5 default hydrological performance, parameter sensitivity identified for 28 hydrological metrics, and large ensemble outputs for hydrological predictions. The presented datasets can assist CLM5 calibration and to support broad applications such as evaluating vulnerabilities to droughts and floods. The dataset can be used to identify under what hydroclimate conditions parametric uncertainties demonstrate substantial effects on hydrological predictions and clarify where further investigations are needed to understand how land runoff uncertainties interact with other Earth system processes. Please refer to the README.pdf for a description of the included files. Note that raw CLM5 model outputs for each forcing dataset are hosted on a Globus endpoint: https://app.globus.org/file-manager?destination_id=d22ef858-27b0-11ed-a910-fd3165076336.

Yan, Hongxiang↗

IM3 SELECT Urbanization Data

IM3 SELECT Urbanization Data Urban fraction is provided in TIF files projected on the WGS84 datum at coarse (1/8 degree) and downscaled (1km) resolutions across the globe for each of three Shared Socioeconomic Pathway (SSP) scenarios corresponding to SSP2, SSP3, and SSP5; and each of two population scenarios corresponding to the default population scenario and an updated population scenario with more detailed projections for the United States. The population projections are provided as CSV files. Folder structure: default_population population urban_fraction coarse SSP2 SSP3 SSP5 downscaled SSP2 SSP3 SSP5united_states_updated_population population urban_fraction coarse SSP2 SSP3 SSP5 downscaled SSP2 SSP3 SSP5 Urban fraction data was produced using the SELECT model v1.0.0 (Gao, J. & O'Neill, B.C. 2019). Default population data derived from Gao, J. & O'Neill, B.C. 2020. Original model outputs produced using the default population data are available from Gao, J. 2020. Updated United States population data derived from Zoraghein, H. & O'Neill, B.C. 2020. Other SELECT input files available at Gao, J. & O'Neill, B.C. 2022.

McManamay, Ryan↗

mosartwmpy sample input data; 1980 - 1985

Sample input data spanning the years 1980-1985 for running the mosartwmpy water routing and management model: https://github.com/IMMM-SFA/mosartwmpy More information is available in the README.

rexer, emily↗