Search NASA⌕ Search

Engineering topics

Tian, Bingbing

Publications and source records attributed to Tian, Bingbing.

Polycation ionic liquid tailored PEO-based solid polymer electrolytes for high temperature lithium metal batteries

Poly(ethylene oxide) (PEO)-based polymer electrolytes are promising candidates for solid-state electrolytes in safer, next generation lithium metal batteries. Despite their benefits however, PEO-based electrolyte exhibits highly crystalline ethylene oxide chains that provide poor ionic conductivity and, thus severely limit its practical application. Here, we report the use of hydroxypropyl trimethylammonium bis(trifluoromethane) sulfonimide chitosan salt (HACC-TFSI), which is an amorphous poly(ionic liquid) based biomass chitosan derivative, as a modifier for PEO-based solid polymer electrolytes (SPEs) to address these deficiencies. Hybrid SPEs with HACC-TFSI display enlarged amorphous regions with enhanced ionic conductivity. Interactions between quaternary ammonium cations and TFSI-anions in hybrid SPEs are also found to promote dissociation between Li + and TFSI - , which further increases ionic mobility. Moreover, the electrochemical stability, mechanical strength, and thermal stability of hybrid SPEs are collectively superior to blank SPEs without HACC-TFSI. LiFePO 4 /SPEs/Li full-cells assembled using 10wt% HACC-TFSI in PEO (10%HACC-TFSI/SPEs) electrolyte provide a capacity of 161.3 mAh g -1 and operate with excellent cycle performances at 0.2 C and 60 C. Finally, even when the temperature is increased to 150 C, LiFePO 4 /SPEs/Li cells with 10%HACC-TFSI/SPEs still display remarkable cycle performance with 73% capacity retention after 100 cycles at 1 C rate.

25 ENERGY STORAGE↗

Controllable deuteration of halogenated compounds by photocatalytic D2O splitting

Deuterium labeling is of great value in organic synthesis and the pharmaceutical industry. However, the state-of-the-art C–H/C–D exchange using noble metal catalysts or strong bases/acids suffers from poor functional group tolerances, poor selectivity and lack of scope for generating molecular complexity. Herein, we demonstrate the deuteration of halides using heavy water as the deuteration reagent and porous CdSe nanosheets as the catalyst. The deuteration mechanism involves the generation of highly active carbon and deuterium radicals via photoinduced electron transfer from CdSe to the substrates, followed by tandem radicals coupling process, which is mechanistically distinct from the traditional methods involving deuterium cations or anions. Our deuteration strategy shows better selectivity and functional group tolerances than current C–H/C–D exchange methods. Extending the synthetic scope, deuterated boronic acids, halides, alkynes, and aldehydes can be used as synthons in Suzuki coupling, Click reaction, C–H bond insertion reaction etc. for the synthesis of complex deuterated molecules.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controlled growth of ultrathin Mo 2 C superconducting crystals on liquid Cu surface

Exhibiting thickness-dependent change in the critical temperature (T c ) for the onset of superconductivity, Mo 2 C is an important new member in the family of two-dimensional atomic crystals. Controllable growth in terms of morphology and thickness is necessary to elucidate its intrinsic properties at the 2D limit. Here we demonstrate the chemical vapor deposition of ultrathin Mo 2 C crystals on liquid Cu surface where the morphology of the crystals can be controlled by tuning the carbon supersaturation. A unique staggered carbon vacancy ordering is discovered in Mo 2 C crystals having particular geometries. Thickness engineering of the crystal can be achieved by controlling the thickness of the Cu catalyst layer, which affords a facile route to grow ultrathin 2D samples. Ultrathin Mo 2 C crystals so obtained, have been characterized using aberration corrected scanning transmission electron microscopy annular dark field imaging, where the co-existence of both AA and AB stacking modes is observed. The high crystallinity of the Mo 2 C crystals synthesized in this work is attested by its characteristic sharp superconducting transition.

36 MATERIALS SCIENCE↗

Lateral epitaxy of atomically sharp WSe 2 /WS 2 heterojunctions on silicon dioxide substrates

Here, in recent years, 2-D transition-metal dichalcogenides (TMDCs) have received great interests because of the broader possibilities offered by their tunable band gaps, as opposed to gapless graphene which precludes application in digital electronics. TMDCs exhibit an indirect-to-direct band gap transition at the single atomic sheet state as well as optically accessible spin degree of freedom in valleytronics.

36 MATERIALS SCIENCE↗

Phase restructuring in transition metal dichalcogenides for highly stable energy storage

Achieving homogeneous phase transition and uniform charge distribution is essential for good cycle stability and high capacity when phase conversion materials are used as electrodes. Herein, we show that chemical lithiation of bulk 2H-MoS 2 distorts its crystalline domains in three primary directions to produce mosaic-like 1T' nanocrystalline domains, which improve phase and charge uniformity during subsequent electrochemical phase conversion. 1T'-Li x MoS 2 , a macroscopic dense material with interconnected nanoscale grains, shows excellent cycle stability and rate capability in a lithium rechargeable battery compared to bulk or exfoliated-restacked MoS 2 . Transmission electron microscopy studies reveal that the interconnected MoS 2 nanocrystals created during the phase change process are reformable even after multiple cycles of galvanostatic charging/discharging, which allows them to play important roles in the long term cycling performance of the chemically intercalated TMD materials. Finally, these studies shed light on how bulk TMDs can be processed into quasi-2D nanophase material for stable energy storage.

25 ENERGY STORAGE↗

Chemical vapor deposition of high-quality large-sized MoS 2 crystals on silicon dioxide substrates

Large-sized MoS 2 crystals can be grown on SiO 2 /Si substrates via a two-stage chemical vapor deposition method. The maximum size of MoS 2 crystals can be up to about 305 μm. The growth method can be used to grow other transition metal dichalcogenide crystals and lateral heterojunctions. Additionally, the electron mobility of the MoS 2 crystals can reach ≈30 cm 2 V –1 s –1 , which is comparable to those of exfoliated flakes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗