Search NASA⌕ Search

Engineering topics

Tian, Ziqi

Publications and source records attributed to Tian, Ziqi.

Confined Ionic Liquid in an Ionic Porous Aromatic Framework for Gas Separation

Ionic liquids (ILs) and porous frameworks are commonly employed in gas separation, but rarely together. To leverage their combined advantages, we designed a novel system comprising an ionic liquid inside a charged porous-polymer framework. A positively charged ionic porous aromatic framework was impregnated with an ionic liquid to confine the cations and anions inside the polymeric framework via electrostatic interactions. Molecular dynamics and free energy simulations were performed to determine the solubility, diffusivity, and hence permeability of CO 2 and CH 4 through the composite material. We found that the polymeric framework introduces nanoscale space in the confined IL, improving gas solubility, while the IL promotes gas transport in the porous structure. Here, the confinement impacts CO 2 and CH 4 very differently regarding their solubility and diffusivity. Through tuning of the ionic-liquid loading, both high CO 2 permeability and high CO 2 /CH 4 selectivity could be achieved, overcoming the Robeson upper bound. This work highlights the advantages of confined ionic liquids in an ionic porous-polymer framework in enhancing selective gas separation.

36 MATERIALS SCIENCE↗

Supported bicyclic amidine ionic liquids as a potential CO 2 /N 2 separation medium

In this paper, five new room temperature ionic liquids were tested as supported ionic liquid membranes (SILMs) for CO 2 /N 2 separation capability. This series of ionic liquids (ILs) contains bicyclic amidine cations of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) or 1,5-diazabicyclo[4.3.0]non-5-ene (DBN) with small alkyl chain substituents. These ILs have been synthesized to examine the effects of cation structure on free volume. Relevant physical and chemical properties have been examined, including CO 2 solubility and viscosity. The relationship between fractional free volume and permeability of gases is explored, with an interesting note on solubility. Each cation was paired with two different anions: bis(trifluoromethanesulfonyl)imide and tetracyanoborate, for further investigation of the cation-anion interaction on SILM permeability and selectivity. Finally, three of these new ILs have exceeded Robeson's upper bound for CO 2 /N 2 gas separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of pore density on gas permeation through nanoporous graphene membranes

Pore density is an important factor dictating gas separations through one-atom-thin nanoporous membranes, but how it influences the gas permeation is not fully understood. We use molecular dynamics (MD) simulations to investigate gas permeation through nanoporous graphene membranes with the same pore size (3.0 Å × 3.8 Å in dimensions) but varying pore densities (from 0.01 to 1.28 nm -2 ). We find that higher pore density leads to higher permeation per unit area of membrane for both CO 2 and He, but the rate of the increase decreases greatly for CO 2 at high pore densities. As a result, the per-pore permeance decreases for CO 2 but remains relatively constant for He with the pore density, leading to a dramatic change in CO 2 /He selectivity. By separating the total flux into direct flux and surface flux, we find that He permeation is dominated by direct flux and hence the per-pore permeation rate is roughly constant with the pore density. In contrast, CO 2 permeation is dominated by surface flux and the overall decreasing trend of the per-pore permeation rate of CO 2 with the pore density can be explained by the decreasing per-pore coverage of CO 2 on the feed side with the pore density. Finally, our work now provides a complete picture of the pore-density dependence of gas permeation through one-atom-thin nanoporous membranes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimal Size of a Cylindrical Pore for Post-Combustion CO 2 Capture

Pore size is an essential factor in controlling gas sorption in porous separation media. The overlap of the potential energy surface (PES) of CO 2 interacting with a cylindrical pore wall can be used to tune gas sorption inside a porous material, but how such overlap can benefit post-combustion CO 2 capture has not been fully addressed from a computational perspective. Here we use van der Waals density functional (vdW-DF) theory to assess the overlap of PES of CO 2 inside cylindrical pores as represented by carbon nanotubes (CNTs) of different diameters. Then we employ grand-canonical Monte Carlo simulations to obtain the adsorption capacity and selectivity of a CO 2 /N 2 mixture with a CO 2 partial pressure of 0.15 bar at room temperature. We find that the maximum PES overlap and maximum amount of CO 2 adsorbed are both achieved at a CNT diameter or cylindrical pore size of 7.8 Å, which corresponds to an accessible pore size of 4.4 Å. A further investigation of N2 adsorption corroborates the idea of PES overlap. GCMC simulations reveal that a maximum CO 2 /N 2 selectivity of ~33 is reached at a CNT diameter of 7.05 Å for the gas mixture. Here, this work suggests that a cylindrical pore size between 7 and 8 Å would be most beneficial for post-combustion CO 2 capture from overlap of PES.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identify the Removable Substructure in Carbon Activation

Activated carbon plays a pivotal role in achieving critical functions, such as separation, catalysis, and energy storage. A remaining question of carbon activation is which substructures in amorphous carbon are preferentially removed during activation. Herein, we report the first structure–activation correlation elucidated on the basis of unprecedented comprehensive characterization on carbon activation. We discover that activation under CO2 preferentially removes graphenic layers that are more defective. Therefore, the resulting activated carbon contains thinned turbostratic nanodomains that are of a higher local graphenic order. The mechanistic insights explain why more defective soft carbon is “burned” under CO2 at a much faster rate than hard carbon. The mechanism leads to an activation-based design principle of mesoporous carbon. Guided by this principle, a bimodal micromesoporous carbon is prepared simply by CO2 activation. Our findings may cause a paradigm shift for the rational design of nanoporous carbon.

Xing, Zhenyu↗

Design of Calix-Based Cages for CO 2 Capture

Cage compounds offer a unique opportunity to capture CO 2 , but a perfect design has been elusive. Herein, we computationally designed cage compounds by using linkers to connect two calix[4]pyrrole units together into a cage for capturing CO 2 . Quantum mechanical calculations based on dispersion-corrected density functional theory show that the -(CH 2 ) n – linker has an optimal length at n = 5 where the N–H groups from the pyrrole molecules form four H···O interactions with the two terminal O atoms of CO 2 . The cationic and zwitterionic cages can also achieve high CO 2 affinity and CO 2 /N 2 selectivity in the cage cavity compared with previously synthesized cages. Based on the computed potential energy curves of gas entering the cage, we conclude that all the cages are easily accessible by CO 2 . This work shows that the calix-based cages have great potential for selective CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pd-Metalated Conjugated Nanoporous Polycarbazoles for Additive-Free Cyanation of Aryl Halides: Boosting Catalytic Efficiency through Spatial Modulation

Transition-metal-catalyzed cyanation of aryl halides is a common route to benzonitriles, which are integral to many industrial procedures. However, traditional homogeneous catalysts for such processes are expensive and suffer poor recyclability, so a heterogeneous analogue is highly desired. A novel spatial modulation approach has been developed in this paper to fabricate a heterogeneous Pd-metalated nanoporous polymer, which catalyzes the cyanation of aryl halides without need for ligands. Finally, the catalyst displays high activity in the synthesis of benzonitriles, including high product yields, excellent stability and recycling, and broad functional-group tolerance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ion-Gated Gas Separation through Porous Graphene

Porous graphene holds great promise as a one-atom-thin, high-permeance membrane for gas separation, but to precisely control the pore size down to 3–5 Å proves challenging. Here we propose an ion-gated graphene membrane comprising a monolayer of ionic liquid-coated porous graphene to dynamically modulate the pore size to achieve selective gas separation. This approach enables the otherwise nonselective large pores on the order of 1 nm in size to be selective for gases whose diameters range from 3 to 4 Å. We show from molecular dynamics simulations that CO 2 , N 2 , and CH 4 all can permeate through a 6 Å nanopore in graphene without any selectivity. But when a monolayer of [emim][BF 4 ] ionic liquid (IL) is deposited on the porous graphene, CO 2 has much higher permeance than the other two gases. We find that the anion dynamically modulates the pore size by hovering above the pore and provides affinity for CO 2 , while the larger cation (which cannot go through the pore) holds the anion in place via electrostatic attraction. This composite membrane is especially promising for CO 2 /CH 4 separation, yielding a CO 2 /CH 4 selectivity of about 42 and CO 2 permeance of ~10 5 GPU (gas permeation unit). We further demonstrate that selectivity and permeance can be tuned by the anion size, pore size, and IL thickness. The present work points toward a promising direction of using the atom-thin ionic liquid/porous graphene hybrid membrane for high-permeance, selective gas separation that allows a greater flexibility in substrate pore size control.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of tuning CO 2 -philicity in polydimethylsiloxane-based membranes for carbon dioxide separation

Amidoxime-functionalized polydimethylsiloxane (AO-PDMSPNB) membranes with various amidoxime compositions were synthesized via ring-opening metathesis polymerization followed by post-polymerization modification. Compared to other previously reported PDMS-based membranes, the amidoxime-functionalized membranes show enhanced CO 2 permeability and CO 2 /N 2 selectivity. The overall gas separation performance (CO 2 permeability 6800 Barrer; CO 2 /N 2 selectivity 19) of the highest performing membrane exceeds the Robeson upper bound line, and the excellent permeability of the copolymer itself provides great potential for real world applications where huge volumes of gases are separated. This study details how tuning the CO 2 -philicity within rubbery polymer matrices influences gas transport properties. Key parameters for tuning gas transport properties are discussed, and the experimental results show good consistency with theoretical calculations. Finally, this study provides a roadmap to enhancing gas separation performance in rubbery polymers by tuning gas solubility selectivity.

54 ENVIRONMENTAL SCIENCES↗

Use of steric encumbrance to develop conjugated nanoporous polymers for metal-free catalytic hydrogenation

The design and synthesis of metal-free heterogeneous catalysts for efficient hydrogenation remains a great challenge. Here we report a novel approach to create conjugated nanoporous polymers with efficient hydrogenation activities toward unsaturated ketones by leveraging the innate steric encumbrance. The steric bulk of the framework as well as the local sterics of the Lewis basic sites within the polymeric skeleton result in the generation of the putative catalyst. Lastly, this approach opens up new possibilities for the development of innovative metal-free heterogeneous catalysts.

36 MATERIALS SCIENCE↗

First-principles molecular dynamics simulation of the Ca 2 UO 2 (CO 3 ) 3 complex in water

Recent experiments have shown that the neutral Ca 2 UO 2 (CO 3 ) 3 complex is the dominant species of uranium in many uranyl-containing streams. However, the structure and solvation of such a species in water has not been investigated from first principles. Herein we present a first principles molecular dynamics perspective of the Ca 2 UO 2 (CO 3 ) 3 complex in water based on density functional theory and Born–Oppenheimer approximation. We find that the Ca 2 UO 2 (CO 3 ) 3 complex is very stable in our simulation timeframe for three different concentrations considered and that the key distances from our simulation are in good agreement with the experimental data from extended X-ray absorption fine structure (EXAFS) spectroscopy. More important, we find that the two Ca ions bind differently in the complex, as a result of the hydrogen-bonding network around the whole complex. Furthermore, this finding invites confirmation from time-resolved EXAFS and has implications in understanding the dissociative equilibrium of the Ca 2 UO 2 (CO 3 ) 3 complex in water.

74 ATOMIC AND MOLECULAR PHYSICS↗

What can molecular simulation do for global warming?

Carbon capture is necessary to reduce CO 2 emissions from burning fossil fuels, which has led to global warming. Molecular simulations offer chemical insights and design principles for new separation media and for understanding the separation process. In this review, we summarize recent applications of simulation methods from ab initio and density functional theory to classical molecular dynamics and Grand canonical Monte Carlo in understanding ionic liquids and porous carbonaceous materials for CO 2 separation, especially the postcombustion CO 2 / N 2 separation. We highlight design and simulation of the porous two‐dimensional ( 2D ) materials as the highly selective membranes for CO 2 separation. Simulated structure–property relationships for the materials are discussed in connection to the corresponding chemisorption, physisorption, or membrane process. In chemisorption, the focus is on reducing the heat of reaction with CO 2 ; in physisorption, the key is to increase the binding strength via CO 2 ‐philic groups; in membrane process, the key is to increase solubility for ionic‐liquid membranes and to control pore size for 2D materials. Challenges and opportunities for simulating emerging materials are also discussed. WIREs Comput Mol Sci 2016, 6:173–197. doi: 10.1002/wcms.1241 This article is categorized under: Structure and Mechanism > Computational Materials Science Electronic Structure Theory > Density Functional Theory Molecular and Statistical Mechanics > Molecular Interactions

Tian, Ziqi↗

Ab Initio Screening of CO 2 -philic Groups

Ab initio calculations were used to identify CO 2 -philic groups. Over 55 neutral molecules were screened for CO 2 affinity via binding energetics. It is found that poly(ethylene oxide)s (PEO) oligomers with more than three repeating units are good CO 2 -binding groups, consistent with the highperformance of PEO-based materials for CO 2 /N 2 separation. More interestingly, two triazole groups linked with a methylene chain are also excellent for CO 2 binding with a favorable interaction of more than 28 kJ/mol, indicating that polymers or covalent-organic frameworks (COFs) with triazoles may be utilized for CO 2 capture. This work provides a useful guide to introduce promising organic groups into polymeric membranes and COFs for CO 2 /N 2 separation media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anion-Functionalized Task-Specific Ionic Liquids: Molecular Origin of Change in Viscosity upon CO 2 Capture

The structure and dynamics of a task-specific ionic liquid (TSIL), trihexyl(tetradecyl)phosphonium imidazolate, before and after absorbing CO 2 were studied with a molecular dynamics (MD) simulation. This particular ionic liquid is one of several newly discovered azole-based TSILs for equimolar CO 2 capture. Unlike other TSILs whose viscosity increases drastically upon reaction with CO 2 , its viscosity decreases after CO 2 absorption. This unique behavior was confirmed in our MD simulation. In this study, we find that after CO 2 absorption the translational dynamics of the whole system is accelerated, accompanied by an accelerated rotational dynamics of the cations. Radial distribution function and spatial distribution function analyses show that the anions become asymmetric after reaction with CO 2 , and this causes the imbalance of the interaction between the positive and negative regions of the ions. The interaction between the phosphorus atom of the cation and oxygen atoms of the carboxyl group on the anion is enhanced, while that between the phosphorus atom and the naked nitrogen atom of the anion is weakened. The ion-pair correlation functions further support that the weakened interaction leads to faster dissociation of cation–anion pairs, thereby causing an accelerated dynamics. Hence, the asymmetry of anions influences the dynamics of the system and affects the viscosity. In conclusion, this insight may help design better TSILs with decreased viscosity for CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗