Search NASA⌕ Search

Engineering topics

Timko, Michael T.

Publications and source records attributed to Timko, Michael T..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Removing Fluoride from Double Four-Membered Rings Yielding Defect-Free Zeolites under Mild Conditions Using Ozone

We have investigated ozone treatment of as-made LTA zeolites under mild temperature conditions (175 °C) using experiments and periodic DFT as a method of energy savings and engineering defects such as silanol nests in comparison with conventional calcination at 550 °C. We have studied ozone treatment on LTA samples synthesized with 1,2-dimethyl-3-(4-methylbenzyl) imidazolium (denoted as “BULKY”) as the primary organic structure-directing agent (OSDA) and with various amounts of tetramethylammonium (TMA) as a secondary OSDA. Ozone treatment of LTA-BULKY at 175 °C was found to give defect-free, pristine LTA materials as determined by 29 Si NMR, 13 C NMR, Raman spectra, and DFT to assign the spectra. This represents a significant and unexpected finding: that fluoride ions can be completely removed from double four-membered rings (D4Rs) under such mild conditions. Furthermore, ozone treatment of LTA-BULKY-TMA samples removed BULKY but left behind TMA/F, giving a new and more diverse structural landscape of Si environments in LTA. Ab initio MetaDynamics calculations provide pathways with relatively low barriers, explaining how fluoride ions can be removed from D4Rs, leaving behind defect-free LTA materials under mild conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Dimensionally reduced machine learning model for predicting single component octanol–water partition coefficients

Abstract MF-LOGP, a new method for determining a single component octanol–water partition coefficients ( $$LogP$$ LogP ) is presented which uses molecular formula as the only input. Octanol–water partition coefficients are useful in many applications, ranging from environmental fate and drug delivery. Currently, partition coefficients are either experimentally measured or predicted as a function of structural fragments, topological descriptors, or thermodynamic properties known or calculated from precise molecular structures. The MF-LOGP method presented here differs from classical methods as it does not require any structural information and uses molecular formula as the sole model input. MF-LOGP is therefore useful for situations in which the structure is unknown or where the use of a low dimensional, easily automatable, and computationally inexpensive calculations is required. MF-LOGP is a random forest algorithm that is trained and tested on 15,377 data points, using 10 features derived from the molecular formula to make $$LogP$$ LogP predictions. Using an independent validation set of 2713 data points, MF-LOGP was found to have an average $$RMSE$$ RMSE = 0.77 ± 0.007, $$MAE$$ MAE = 0.52 ± 0.003, and $${R}^{2}$$ R 2 = 0.83 ± 0.003. This performance fell within the spectrum of performances reported in the published literature for conventional higher dimensional models ( $$RMSE$$ RMSE = 0.42–1.54, $$MAE$$ MAE = 0.09–1.07, and $${R}^{2}$$ R 2 = 0.32–0.95). Compared with existing models, MF-LOGP requires a maximum of ten features and no structural information, thereby providing a practical and yet predictive tool. The development of MF-LOGP provides the groundwork for development of more physical prediction models leveraging big data analytical methods or complex multicomponent mixtures. Graphical Abstract

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Roadmap for Deployment of Modularized Hydrothermal Liquefaction: Understanding the Impacts of Industry Learning, Optimal Plant Scale, and Delivery Costs on Biofuel Pricing

Hydrothermal liquefaction (HTL) is a promising technology for converting abundant organic wastes into fuels. Previous techno-economic analyses (TEAs) of HTL have been used to estimate the minimum fuel selling price (MFSP) of biofuel products, but these analyses often assume a bespoke plant design where each plant operates under unique process conditions and neglect transportation costs. However, transportation costs must be included in realistic TEAs, and further, a mass-produced fixed-scale modular plant design approach may be more effective than case-by-case plant design, provided that there is sufficient market capacity to benefit from modularization. This study estimates fuel price behavior in the presence of transportation costs and benefits stemming from modular plant design. This analysis indicates that a modular process capable of handling 60 dry tons per day (DTPD) is optimal, resulting in a ~25% reduction in MFSP (from $4.70/GGE, fully upgraded) at complete market feedstock utilization compared with case-by-case design. The associated cost reductions are attributable to learning benefits and modularization. Several HTL deployment “roadmaps” are then explored, with each roadmap consisting of different periods of case-by-case design followed by adoption of a modularized approach. A period of nonmodular industry growth up to market saturation of ~7% followed by implementation of modular plant design strikes a balance between the investment risk and learned cost reductions associated with modular plant design. However, if bespoke plants built during this period of nonmodular growth saturate more than 23% of available feedstock, learned cost reductions are significantly diminished. Here, this study points to the potential benefits of modularized and decentralized waste-to-energy processes when the modularization follows an optimal deployment strategy.

09 BIOMASS FUELS↗
DOE OSTI2022

Emergent Chemical Behavior in Mixed Food and Lignocellulosic Green Waste Hydrothermal Liquefaction

Hydrothermal liquefaction (HTL) is a promising strategy for the conversion of energy-dense waste streams to fuels. Mixed-feed HTL aggregates multiple feed streams to achieve greater scales that capitalize on local resources, hence lowering costs. The potential for new pathways and products upon feedstock blending becomes a compounding level of complexity when unlocking emergent chemistries. Here, food and green waste streams were evaluated under HTL conditions (300 °C, 1 h) to understand the effect of feed molecular composition on product distributions and mechanisms. Thousands of emergent chemical compounds were detected via Fourier transform ion cyclotron resonance mass spectrometry, ultimately leading to the emergence of two dominant outcomes. First, the presence of small amounts of food waste into green waste results in substantial decarboxylation and subsequent polymerization to biocrude than chars. Second, in the other limit, small amounts of green waste promote the capping of oxygenates into the biodiesel range, such as with the emergence of fatty acid methyl esters.

09 BIOMASS FUELS↗
DOE OSTI2022

Hydroxyapatite catalyzed hydrothermal liquefaction transforms food waste from an environmental liability to renewable fuel

Food waste is an abundant and inexpensive resource for the production of renewable fuels. Biocrude yields obtained from hydrothermal liquefaction (HTL) of food waste can be boosted using hydroxyapatite (HAP) as an inexpensive and abundant catalyst. Combining HAP with an inexpensive homogeneous base increased biocrude yield from 14 ± 1 to 37 ± 3%, resulting in the recovery of 49 ± 2% of the energy contained in the food waste feed. Detailed product analysis revealed the importance of fatty-acid oligomerization during biocrude formation, highlighting the role of acid-base catalysts in promoting condensation reactions. Economic and environmental analysis found that the new technology has the potential to reduce US greenhouse gas emissions by 2.6% while producing renewable diesel with a minimum fuel selling price of $1.06/GGE. HAP can play a role in transforming food waste from a liability to a renewable fuel.

09 BIOMASS FUELS↗
DOE OSTI2022

Elucidating the role of reactive nitrogen intermediates in hetero-cyclization during hydrothermal liquefaction of food waste

Hydrothermal liquefaction (HTL) has emerged as a promising strategy for converting abundant, water-rich organic streams into an energy-dense, sustainable, biocrude. Despite major strides in improving oil yields and process intensification, a key underlying challenge persists in relating the composition of the feedstock to the ultimate fate of nitrogen, which is especially important for biocrude quality. To elucidate how nitrogen partitions into the respective gas, aqueous, oil and solid hydrothermal products, food waste was treated under HTL conditions (15 wt% solids, 575 K reaction temperature, and 1 hour reaction time) and elemental, chromatographic and mass spectroscopy analyses were performed on the products to establish dominant product classes and to close mass, carbon, and nitrogen balances. Liquid products (aqueous and biocrude) were found to contain nearly 60% of the nitrogen, with a majority of the biocrude-phase nitrogen in the form of amides. Ab initio thermodynamic and kinetic simulations on model reactants were used to evaluate potential reaction pathways involving reactive nitrogen intermediates. A subsequent kinetic model was evaluated at reaction temperatures ranging 300–1000 K and for a range of feedstock compositions to identify primary reaction pathways. The Maillard reaction is revealed to be the dominant pathway for converting reactive nitrogen intermediates into observed products, especially those in which nitrogen is present as a heterocyclic aromatic. Subsequent product analysis by Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (FT-ICR MS) confirms strong agreement among the experimental data, kinetic model and proposed Maillard pathways.

09 BIOMASS FUELS↗
DOE OSTI2022

Hydrothermal liquefaction for biomass

Catalyst composition and parameters for catalytic hydrothermal liquefaction of biomass to bio-oil fuels target municipal solid waste (MSW) rather than lignin rich plant waste typically sought for bio-oil production. An HTL (Hydrothermal Liquefaction) reactor generates bio-fuel from municipal solid waste (MSW), including receiving, in the HTL reactor, non-lignin based waste from a municipal processing stream, and adding a solvent for extracting sugars from green waste components of the municipal processing stream. The reactor extracts a liquid from the received waste, and converts water soluble products in the liquid into oil soluble products via C—C (carbon-to-carbon) coupling reactions. A catalyst added to the resulting aqueous stream recovers a beneficial oil product, and is optimized by tuning acid and base sites on the solid catalyst.

Timko, Michael T.↗
DOE OSTI2022

Accuracy of predictions made by machine learned models for biocrude yields obtained from hydrothermal liquefaction of organic wastes

Hydrothermal liquefaction (HTL) has potential for converting abundant wet organic wastes into renewable fuels. Because HTL consists of a complex reaction network, deterministic, physics-based prediction of its biocrude yield is prohibitively difficult. Data-driven methods provide an alternative to the physics-based approach; however, rigorous testing must be performed to ensure the accuracy of predictions made by data-driven methods. To this end, a data set was assembled consisting of 570 data points appearing in the open literature. The data set was divided into training, validation, and test sub-sets and used for evaluating different machine learning regression approaches to predict biocrude yield. Among the tested algorithms, Random Forest and eXtreme Gradient Boosting (XGBoost) predicted biocrude yields in a test set that had not been used for training with the greatest accuracy, with root mean square errors (RMSE) of 8.34 and 8.57, respectively. Further refinement of the Random Forest model reduced its RMSE to 8.07. In comparison, predictions of a series of literature models resulted in RMSE ranging from 9.16 in the most accurate case to 27.6 in the least accurate; most literature models yielded RMSE values > 10. Using biocrude yield predictions from the most accurate Random Forest model and a probabilistic economic analysis found that the model accuracy is sufficient to prioritize allocation of resources based on projected minimum fuel selling price. In our report the models and analysis represent a major advance in the ability to use readily available data to predict biocrude yields on new feedstocks that have not previously been studied.

42 ENGINEERING↗
DOE OSTI2022

Titrating Controlled Defects into Si-LTA Zeolite Crystals Using Multiple Organic Structure-Directing Agents

Controlling defects in zeolites is crucial for tuning their adsorption and catalytic properties. In this work, we have performed an integrated zeolite synthesis, spectroscopy, and density functional theory study to test the limit of F– as a charge-balancing agent that mitigates defects in siliceous zeolites. We focused on the synthesis of siliceous zeolite LTA at 150 °C with 1,2-dimethyl-3-(4-methylbenzyl) imidazolium as the primary organic structure-directing agent (OSDA) and tetramethyl ammonium (TMA) as the secondary OSDA. By varying the amount of TMA in the synthesis gel, positive charges were titrated into the resulting as-made Si-LTA. Surprisingly, we found that greater TMA concentration does not induce more F– to enter into the zeolite. 29Si solid-state MAS NMR, Raman spectroscopy, and density functional theory suggest that this system has surpassed its capacity for F– to balance OSDA charge, and additional positive charge is balanced by Si–O– framework defects. The number of defects in the as-made Si-LTA can be precisely titrated by the amount of TMA in the zeolite structures. For the Si-LTA synthesized without TMA, framework defects formed in the early stage of crystal growth were found to heal during later crystallization, leading to defect-free Si-LTA. However, for the Si-LTA synthesized with TMA, the defects formed in early stages do not heal. A DFT thermodynamic analysis explains that crowding of Si-LTA pores by TMA impedes defect healing; this prediction is corroborated by synthesis experiments at an elevated temperature (170 °C). These results indicate that F– can have a limited capacity to balance OSDA charge in zeolite synthesis, opening up a third route to zeolite synthesis intermediate between the fluoride and hydroxide routes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Identifying Order and Disorder in Double Four-Membered Rings via Raman Spectroscopy during Crystallization of LTA Zeolite

Fluoride (F – ) has been essential for the synthesis of low-defect siliceous zeolites. It has been hypothesized that F – balances the positive charges from organic structure-directing agents (OSDAs) and stabilizes key building units during zeolite crystallization such as the double four-membered ring (D4R). However, due to the lack of characterization techniques for investigating medium-range structures, including rings and cages formed during zeolite crystallization, the roles of F – in stabilizing building units and maintaining local charge balance during zeolite assembly are not yet fully understood. Here, the crystallization of siliceous Linde type A (LTA) zeolite in the presence of F – was investigated using Raman spectroscopy and periodic density functional theory (DFT) calculations. We have discovered that the F – -filled double four-membered ring (F – /D4R) and the empty D4R exhibit rather distinct Raman features. Both the F – /D4R and empty D4R are formed in the LTA zeolite synthesized in the presence of F – using 1,2-dimethyl-3-(4-methylbenzyl) imidazolium as the OSDA. Observed Raman bands of the F – /D4R and empty D4R, along with predictive DFT calculations on LTA supercells, reveal an ordered distribution of these two D4R units in the final as-made LTA zeolite. The discovery of these distinct Raman signatures of F – /D4R and empty D4R units opens an interesting new window for studying defects in the D4R during zeolite formation. In particular, we have observed variation in Raman intensities of F – /D4R and empty D4R bands during LTA crystallization; periodic DFT calculations indicate that the observed Raman behavior is consistent with empty D4R units containing one or two Si vacancies surrounded by Q 3 Si—consistent also with solid-state nuclear magnetic resonance measurement. These defects appear to heal during further crystallization, leading to the formation of defect-free LTA zeolite crystals. Altogether, our results provide deeper understanding on the roles of F – in charge balancing and stabilizing intact D4R units during zeolite formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Metal oxide supported Ni-impregnated bifunctional catalysts for controlling char formation and maximizing energy recovery during catalytic hydrothermal liquefaction of food waste

Nickel (Ni)-impregnated metal oxide catalysts, Ni/CeZrO x , Ni/ZrO 2 , and Ni/CeO 2 , were investigated to maximize energy recovery and reduce char yield during catalytic hydrothermal liquefaction (CHTL) of food waste. Yields of char, biocrude, water soluble products, and gas were measured at 300 °C and 1 hour for both the parent oxides (CeZrO x , ZrO 2 , and CeO 2 ) and the Ni-impregnated versions. Using Ni-based catalysts reduced the carbon-weighted char yield from 16–24% to <10% and decreased the energy recovery of char from 39–47% to <21%, as compared with control tests. In particular, using Ni/ZrO 2 resulted in the greatest biocrude yield, greatest reduction of char yield, and greatest energy recovered as biocrude (39.2%). After factoring in all forms of usable energy produced from food waste, the total energy recovery obtained for the catalysts studied here was >60%. Ni/ZrO 2 and Ni/CeO 2 show the greatest potential for controlling char growth and maximizing energy recovered from food waste. The crystalline structures of all three oxides were hydrothermally stable. Catalyst reuse tests indicate that the biocrude and char yields remained the same for the first and second use (within uncertainty) and that the catalyst retains its initial crystallinity and 93% of its initial Ni content. Molecular composition of biocrudes analyzed by the state-of-the-art analytical platforms (including GC-MS, GC × GC, FT-ICR MS, and 1H NMR) revealed minor differences in the chemical constituents of biocrudes obtained using different catalysts and provided some insight regarding reaction mechanism.

09 BIOMASS FUELS↗
DOE OSTI2020

Synergistic Effects of Inexpensive Mixed Metal Oxides for Catalytic Hydrothermal Liquefaction of Food Wastes

Industrial wastes and natural mixed oxide materials were evaluated as inexpensive heterogeneous catalysts for catalytic hydrothermal liquefaction (CHTL) of food wastes. Red mud and red clay achieved biocrude carbon yields of 47.0 and 39.5% with higher heating values (HHVs) of 40.2 and 37.7 MJ kg –1 , respectively, which were much greater than those without the catalyst (biocrude carbon yield of 19.7% and HHV of 36.1 MJ kg –1 ). Biocrude characterization revealed that similar families of molecules were formed in the presence and absence of catalysts, implying that the main role of the catalyst is to promote rates of thermal reactions, leading to biocrude production without opening new pathways. The crystalline structures of inexpensive mixed oxides were stable under hydrothermal conditions, with modest calcium leaching (7.5%) and trace leaching of other metals. Using red clay or red mud resulted in >40% recovery of the energy in food waste as biocrude, greater than that obtained under noncatalytic conditions (18%) or from any individual constituent oxide (19–27%). The improved CHTL performance of the mixed metal oxides compared with single-metal oxides was attributed to the synergistic effects of base and acid sites present on catalyst surfaces; mixed oxides presented balanced densities of acids and bases, whereas the constituent oxides were either primarily acidic or primarily basic. Lastly, the percent of energy recovered as biocrude oil was strongly correlated with the base-to-acid site density ratio, providing an important performance predictor for CHTL conversion of food waste to bioenergy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Critical Role of Tricyclic Bridges Including Neighboring Rings for Understanding Raman Spectra of Zeolites

Raman spectroscopy of network solids such as zeolites is critical for shedding light on collective vibrations of medium-range structures such as rings that exist in crystals and that form during crystallization processes. Despite this importance, assignments of Raman spectra are not completely understood, though it is often assumed that Raman bands can be assigned to individual rings. We report a systematic zeolite synthesis, spectroscopy, and periodic DFT study of several all-silica zeolites to test this assumption and to determine the fundamental structural motifs that explain Raman spectral features. We have discovered from normal-mode analysis that Raman bands can be assigned to tricyclic bridges: three zeolite rings that share a common Si-O- Si bridge. Additionally, we have found that the vibrational frequency of a given Raman band can be correlated to the smallest ring of its tricyclic bridge and not to the ring that is actually vibrating. Finally, we have discovered a precise anticorrelation between Raman frequency and Si-O-Si angle. These discoveries reflect new ways to investigate structures of network materials made of corner-sharing tetrahedra and to study crystallization from amorphous gels where structural information is limited.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Engineered microbial biofuel production and recovery under supercritical carbon dioxide

Culture contamination, end-product toxicity, and energy efficient product recovery are long-standing bioprocess challenges. To solve these problems, we propose a high-pressure fermentation strategy, coupled with in situ extraction using the abundant and renewable solvent supercritical carbon dioxide (scCO 2 ), which is also known for its broad microbial lethality. Towards this goal, we report the domestication and engineering of a scCO 2 -tolerant strain of Bacillus megaterium, previously isolated from formation waters from the McElmo Dome CO 2 field, to produce branched alcohols that have potential use as biofuels. After establishing induced-expression under scCO 2 , isobutanol production from 2-ketoisovalerate is observed with greater than 40% yield with co-produced isopentanol. Finally, we present a process model to compare the energy required for our process to other in situ extraction methods, such as gas stripping, finding scCO 2 extraction to be potentially competitive, if not superior.

09 BIOMASS FUELS↗
NASA NTRS2014

Novel Catalysts and Processing Technologies for Production of Aerospace Fuels from Non-Petroleum Raw Materials

Transportation fuels production (including aerospace propellants) from non-traditional sources (gases, waste materials, and biomass) has been an active area of research and development for decades. Reducing terrestrial waste streams simultaneous with energy conversion, plentiful biomass, new low-cost methane sources, and/or extra-terrestrial resource harvesting and utilization present significant technological and business opportunities being realized by a new generation of visionary entrepreneurs. We examine several new approaches to catalyst fabrication and new processing technologies to enable utilization of these nontraditional raw materials. Two basic processing architectures are considered: a single-stage pyrolysis approach that seeks to basically re-cycle hydrocarbons with minimal net chemistry or a two-step paradigm that involves production of supply or synthesis gas (mainly carbon oxides and H2) followed by production of fuel(s) via Sabatier or methanation reactions and/or Fischer-Tröpsch synthesis. Optimizing the fraction of product stream relevant to targeted aerospace (and other transportation) fuels via modeling, catalyst fabrication and novel reactor design are described. Energy utilization is a concern for production of fuels for either terrestrial or space operations; renewable sources based on solar energy and/or energy efficient processes may be mission enabling. Another important issue is minimizing impurities in the product stream(s), especially those potentially posing risks to personnel or operations through (catalyst) poisoning or (equipment) damage. Technologies being developed to remove (and/or recycle) heteroatom impurities are briefly discussed as well as the development of chemically robust catalysts whose activities are not diminished during operation. The potential impacts on future missions by such new approaches as well as balance of system issues are addressed.

space processing↗