Search NASA⌕ Search

Engineering topics

Titus, Charles J.

Publications and source records attributed to Titus, Charles J..

At least 19 records

Probing soft X-ray induced photoreduction of a model Mn-complex at cryogenic conditions

Soft X-ray absorption spectroscopy of first row transition elements at their respective L -edges provides important information about the oxidation and spin states of the metal centers. However, the associated sample damage in radiation-sensitive samples substantially alters the electronic and chemical structures of redox-active metal centers. Here, we measure the soft X-ray spectrum of the model Mn III (acac) 3 complex containing a redox-active Mn III metal center in an octahedral environment with a superconducting transition-edge sensor detector. To reduce the secondary damage resulting primarily from the diffusion of radicals and electrons, the spectra are collected at 30 K and 80 K on solid samples. Starting from the first scan, we detect the contribution of X-ray induced sample damage leading to a change in the Mn II intensity. However, at low temperatures, particularly at 30 K, we do not observe a gradual increase in the radiation damage with successive scans with the X-ray beam at the same spot. At our estimated dose of 90 kGy, we find 62% of Mn III (acac) 3 is still intact at 30 K. However, at room temperature, we see a gradual increase in radiation damage with increasing numbers of scans at the same spot, which is consistent with the possibility of increased diffusion rates of secondary radicals and electrons as noted in other studies.

L-edge spectroscopy↗

Formal Oxidation States and Coordination Environments in the Catalytic Reduction of CO to Methanol

Fundamental insight into multi-electron, multi-proton redox reactions with organometallic catalysts is greatly facilitated by knowledge of the formal oxidation state of the metal center in each of the elementary reaction steps that comprise the catalytic cycle. X-ray absorption near edge structure (XANES) is utilized herein to quantify the oxidation states and coordination environment of the organometallic resting state and intermediates in a newly proposed catalytic reduction of carbon monoxide to methanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scrutinizing formally Ni IV centers through the lenses of core spectroscopy, molecular orbital theory, and valence bond theory

Nickel K- and L 2,3 -edge X-ray absorption spectra (XAS) are discussed for 16 complexes and complex ions with nickel centers spanning a range of formal oxidation states from II to IV. K-edge XAS alone is shown to be an ambiguous metric of physical oxidation state for these Ni complexes. Meanwhile, L 2,3 -edge XAS reveals that the physical d-counts of the formally Ni IV compounds measured lie well above the d 6 count implied by the oxidation state formalism. The generality of this phenomenon is explored computationally by scrutinizing 8 additional complexes. The extreme case of NiF 6 2- is considered using high-level molecular orbital approaches as well as advanced valence bond methods. The emergent electronic structure picture reveals that even highly electronegative F-donors are incapable of supporting a physical d 6 Ni IV center. The reactivity of Ni IV complexes is then discussed, highlighting the dominant role of the ligands in this chemistry over that of the metal centers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lewis acid-assisted reduction of nitrite to nitric and nitrous oxides via the elusive nitrite radical dianion

Reduction of nitrite anions (NO 2 - ) to nitric oxide (NO), nitrous oxide (N 2 O) and ultimately dinitrogen (N 2 ) takes place in a variety of environments, including in the soil as part of the biogeochemical nitrogen cycle and in acidified nuclear waste. Nitrite reduction typically takes place within the coordination sphere of a redox-active transition metal. In this report we show that Lewis acid coordination can substantially modify the reduction potential of this polyoxoanion to allow for its reduction under non-aqueous conditions (-0.74 V versus NHE). Detailed characterization confirms the formation of the borane-capped radical nitrite dianion (NO 2 2- ), which features a N(II) oxidation state. Protonation of the nitrite dianion results in the facile loss of nitric oxide (NO), whereas its reaction with NO results in disproportionation to nitrous oxide (N 2 O) and nitrite (NO 2 - ). This system connects three redox levels in the global nitrogen cycle and provides fundamental insights into the conversion of NO 2 - to NO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen K -edge X-ray absorption spectra of liquids with minimization of window contamination

We report oxygen K-edge X-ray absorption spectroscopy is used routinely to study a range of solid materials. However, liquid samples are studied less frequently at the oxygen K-edge due to the combined challenges of high-vacuum conditions and oxygen contamination of window materials. A modular sample holder design with a twist-seal sample containment system that provides a simple method to encapsulate liquid samples under high-vacuum conditions is presented. This work shows that pure silicon nitride windows have lower oxygen contamination than both diamond- and silicon-rich nitride windows, that the levels of oxygen contamination are related to the age of the windows, and provides a protocol for minimizing the background oxygen contamination. Acid-washed 100 nm-thick silicon nitride windows were found to give good quality oxygen K-edge data on dilute liquid samples.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Trends in Carbon, Oxygen, and Nitrogen Core in the X-ray Absorption Spectroscopy of Carbon Nanomaterials: A Guide for the Perplexed

Successful deployment of carbon nanomaterials in many applications, such as sensing, energy storage, and catalysis, relies on the selection, synthesis, and tailoring of the surface properties. Predictive analysis of the behavior is difficult without detailed knowledge of the differences between various carbon nanomaterials and their surface functionalization, thus leaving the selection process to traditional trial-and-error work. The present characterization fills this knowledge gap for carbon nanomaterial surface properties with respect to chemical states and functionalization. We present an overview of the chemical trends that can be extracted from soft X-ray absorption spectroscopy (XAS) spectra on an extended set of nonideal carbon nanomaterials as a function of sp 2 bonded carbon and bond ordering. In particular, the surface chemical state, the presence of long-range order in the carbon matrix, and a qualitative estimation of the amount of oxygen and nitrogen and their respective functional group formation on the material surface, together with the detailed material fabrication parameters, are reported. The results expand our understanding of carbon nanomaterial functionalization, which can support material selection in practice, provided that the specifications of the application are known.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Site-Specific Structure at Multiple Length Scales in Kagome Quantum Spin Liquid Candidates

Realizing a quantum spin liquid (QSL) ground state in a real material is a leading issue in condensed matter physics research. In this pursuit, it is crucial to fully characterize the structure and influence of defects, as these can significantly affect the fragile QSL physics. In this work, we perform a variety of cutting-edge synchrotron x-ray scattering and spectroscopy techniques, and we advance new methodologies for site-specific diffraction and L-edge Zn absorption spectroscopy. The experimental results along with our first-principles calculations address outstanding questions about the local and long-range structures of the two leading kagome QSL candidates, Zn-substituted barlowite Cu 3 Zn x Cu 1-x (OH) 6 FBr and herbertsmithite Cu 3 Zn(OH) 6 Cl 2 . On all length scales probed, there is no evidence that Zn substitutes onto the kagome layers, thereby preserving the QSL physics of the kagome lattice. Our calculations show that antisite disorder is not energetically favorable and is even less favorable in Zn-barlowite compared to herbertsmithite. Site-specific x-ray diffraction measurements of Zn-barlowite reveal that Cu 2+ and Zn 2+ selectively occupy distinct interlayer sites, in contrast to herbertsmithite. Using the first measured Zn L-edge inelastic x-ray absorption spectra combined with calculations, we discover a systematic correlation between the loss of inversion symmetry from pseudo-octahedral (herbertsmithite) to trigonal prismatic coordination (Zn-barlowite) with the emergence of a new peak. Overall, our measurements suggest that Zn-barlowite has structural advantages over herbertsmithite that make its magnetic properties closer to an ideal QSL candidate: its kagome layers are highly resistant to nonmagnetic defects while the interlayers can accommodate a higher amount of Zn substitution.

36 MATERIALS SCIENCE↗

Single-ion magnetism in the extended solid-state: insights from X-ray absorption and emission spectroscopy

Large single-ion magnetic anisotropy is observed in lithium nitride doped with iron. The iron sites are two-coordinate, putting iron doped lithium nitride amongst a growing number of two coordinate transition metal single-ion magnets (SIMs). Uniquely, the relaxation times to magnetisation reversal are over two orders of magnitude longer in iron doped lithium nitride than other 3d-metal SIMs, and comparable with high-performance lanthanide-based SIMs. To understand the origin of these enhanced magnetic properties a detailed characterisation of electronic structure is presented. Access to dopant electronic structure calls for atomic specific techniques, hence a combination of detailed single-crystal X-ray absorption and emission spectroscopies are applied. Together K-edge, L 2,3 -edge and Kβ X-ray spectroscopies probe local geometry and electronic structure, identifying iron doped lithium nitride to be a prototype, solid-state SIM, clean of stoichiometric vacancies where Fe lattice sites are geometrically equivalent. Extended X-ray absorption fine structure and angular dependent single-crystal X-ray absorption near edge spectroscopy measurements determine Fe I dopant ions to be linearly coordinated, occupying a D 6h symmetry pocket. The dopant engages in strong 3dπ-bonding, resulting in an exceptionally short Fe–N bond length (1.873(7) Å) and rigorous linearity. It is proposed that this structure protects dopant sites from Renner–Teller vibronic coupling and pseudo Jahn–Teller distortions, enhancing magnetic properties with respect to molecular-based linear complexes. The Fe ligand field is quantified by L 2,3 -edge XAS from which the energy reduction of 3d z 2 due to strong 4s mixing is deduced. Quantification of magnetic anisotropy barriers in low concentration dopant sites is inhibited by many established methods, including far-infrared and neutron scattering. We deduce variable temperature L 3 -edge XAS can be applied to quantify the J = 7/2 magnetic anisotropy barrier, 34.80 meV (~280 cm –1 ), that corresponds with Orbach relaxation via the first excited, M J = ±5/2 doublet. The results demonstrate that dopant sites within solid-state host lattices could offer a viable alternative to rare-earth bulk magnets and high-performance SIMs, where the host matrix can be tailored to impose high symmetry and control lattice induced relaxation effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

[(MeCN)Ni(CF 3 ) 3 ] - and [Ni(CF 3 ) 4 ] 2– : Foundations toward the Development of Trifluoromethylations at Unsupported Nickel

Nickel anions [(MeCN)Ni(CF 3 ) 3 ] - and [Ni(CF 3 ) 4 ] 2– were prepared by the formal addition of 3 and 4 equiv, respectively, of AgCF 3 to [(dme)NiBr 2 ] in the presence of the [PPh 4 ] + counterion. Detailed insights into the electronic properties of these new compounds were obtained through the use of density functional theory (DFT) calculations, spectroscopy-oriented configuration interaction (SORCI) calculations, X-ray absorption spectroscopy, and cyclic voltammetry. The data collectively show that trifluoromethyl complexes of nickel, even in the most common oxidation state of nickel(II), are highly covalent systems whereby a hole is distributed on the trifluoromethyl ligands, surprisingly rendering the metal to a physically more reduced state. In the cases of [(MeCN)Ni(CF 3 ) 3 ] - and [Ni(CF 3 ) 4 ] 2- , these complexes are better physically described as d 9 metal complexes. [(MeCN)Ni(CF 3 ) 3 ] - is electrophilic and reacts with other nucleophiles such as phenoxide to yield the unsupported [(PhO)Ni(CF 3 ) 3 ] 2– salt, revealing the broader potential of [(MeCN)Ni(CF 3 ) 3 ] - in the development of “ligandless” trifluoromethylations at nickel. Proof-in-principle experiments show that the reaction of [(MeCN)Ni(CF 3 ) 3 ] - with an aryl iodonium salt yields trifluoromethylated arene, presumably via a high-valent, unsupported, and formal organonickel(IV) intermediate. Evidence of the feasibility of such intermediates is provided with the structurally characterized [PPh 4 ] 2 [Ni(CF 3 ) 4 (SO 4 )], which was derived through the two-electron oxidation of [Ni(CF 3 ) 4 ] 2– .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical control of competing electron transfer pathways in iron tetracyano-polypyridyl photosensitizers

Photoinduced intramolecular electron transfer dynamics following metal-to-ligand charge-transfer (MLCT) excitation of [Fe(CN) 4 (2,2'-bipyridine)] 2- (1), [Fe(CN) 4 (2,3-bis(2-pyridyl)pyrazine)] 2- (2) and [Fe(CN) 4 (2,2'-bipyrimidine)] 2- (3) were investigated in various solvents with static and time-resolved UV-Visible absorption spectroscopy and Fe 2p3d resonant inelastic X-ray scattering (RIXS). This series of polypyridyl ligands, combined with the strong solvatochromism of the complexes, enables the 1 MLCT vertical energy to be varied from 1.64 eV to 2.64 eV and the 3 MLCT lifetime to range from 180 fs to 67 ps. The 3 MLCT lifetimes in 1 and 2 decrease exponentially as the MLCT energy increases, consistent with electron transfer to the lowest energy triplet metal-centred ( 3 MC) excited state, as established by the Tanabe–Sugano analysis of the Fe 2p3d RIXS data. In contrast, the 3 MLCT lifetime in 3 changes non-monotonically with MLCT energy, exhibiting a maximum. This qualitatively distinct behaviour results from a competing 3 MLCT → ground state (GS) electron transfer pathway that exhibits energy gap law behaviour. The 3 MLCT → GS pathway involves nuclear tunnelling for the high-frequency polypyridyl breathing mode (hν = 1530 cm -1 ), which is most displaced for complex 3, making this pathway significantly more efficient. Our study demonstrates that the excited state relaxation mechanism of Fe polypyridyl photosensitizers can be readily tuned by ligand and solvent environment. Furthermore, our study reveals that extending charge transfer lifetimes requires control of the relative energies of the 3 MLCT and the 3 MC states and suppression of the intramolecular distortion of the acceptor ligand in the 3 MLCT excited state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Myth of d 8 Copper(III)

Herein seventeen Cu complexes with formal oxidation states ranging from Cu I to Cu III are investigated through the use of multiedge X-ray absorption spectroscopy (XAS) and density functional theory (DFT) calculations. Analysis reveals that the metal–ligand bonding in high-valent, formally Cu III species is extremely covalent, resulting in Cu K-edge and L 2,3 -edge spectra whose features have energies that complicate physical oxidation state assignment. Covalency analysis of the Cu L 2,3 -edge data reveals that all formally Cu III species have significantly diminished Cu d-character in their lowest unoccupied molecular orbitals (LUMOs). DFT calculations provide further validation of the orbital composition analysis, and excellent agreement is found between the calculated and experimental results. The finding that Cu has limited capacity to be oxidized necessitates localization of electron hole character on the supporting ligands; consequently, the physical d 8 description for these formally Cu III species is inaccurate. This study provides an alternative explanation for the competence of formally Cu III species in transformations that are traditionally described as metal-centered, 2-electron Cu I /Cu III redox processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Soft X-ray spectroscopy with transition-edge sensors at Stanford Synchrotron Radiation Lightsource beamline 10-1

We present results obtained with a new soft X-ray spectrometer based on transition-edge sensors (TESs) composed of Mo/Cu bilayers coupled to bismuth absorbers. This spectrometer simultaneously provides excellent energy resolution, high detection efficiency, and broadband spectral coverage. The new spectrometer is optimized for incident X-ray energies below 2 keV. Each pixel serves as both a highly sensitive calorimeter and an X-ray absorber with near unity quantum efficiency. We have commissioned this 240-pixel TES spectrometer at the Stanford Synchrotron Radiation Lightsource beamline 10-1 (BL 10-1) and used it to probe the local electronic structure of sample materials with unprecedented sensitivity in the soft X-ray regime. As mounted, the TES spectrometer has a maximum detection solid angle of 2 × 10 –3 sr. The energy resolution of all pixels combined is 1.5 eV full width at half maximum at 500 eV. We describe the performance of the TES spectrometer in terms of its energy resolution and count-rate capability and demonstrate its utility as a high throughput detector for synchrotron-based X-ray spectroscopy. Here, the results from initial X-ray emission spectroscopy and resonant inelastic X-ray scattering experiments obtained with the spectrometer are presented.

47 OTHER INSTRUMENTATION↗

Advanced X-ray Scattering and Spectroscopy Characterization of an Antisoiling Coating for Solar Module Glass

When dust and other particulates accumulate on the surface of solar modules, the power output of these soiled modules is significantly reduced. To combat this issue, antisoiling coatings can be placed on the top glass surface of solar modules. While there exists some understanding of how antisoiling coatings reduce soiling and reflection losses, approaches to characterize the durability and stability of the chemistry and morphology of antisoiling PV glass module coatings and how they evolve in response to soiling interactions are currently underdeveloped. Here we present the use of small-angle X-ray scattering (SAXS), X-ray photoelectron spectroscopy (XPS), and X-ray absorption spectroscopy (XAS) as a methodology for studying the morphology and chemistry of pristine and soiled antisoiling coatings. Here, this work demonstrates the effectiveness of SAXS in observing coating morphology despite the presence of soil surface layers—a capability which sets it apart as a strong characterization tool for antisoiling coatings on PV glass. XPS and XAS are used as complementary techniques to characterize the evolution of coating surface chemistry before and after soiling. XAS is shown to detect subtle chemical changes in the coating surface that cannot be detected by XPS.

14 SOLAR ENERGY↗

In-situ functionalization of tetrahedral amorphous carbon by filtered cathodic arc deposition

Modification of surface chemistry of carbon based nanomaterials is often necessary in order to meet application specific demands. Literature provides a variety of different post-fabrication treatments, such as acid, oxidizing plasma and heat treatments. These methods offer modification of some surface properties, but their specific effects to materials surface chemistry is only vaguely reported. Thus, in order to meet the application specific demands via carbon nanomaterials surface functionalization, it is necessary to understand the effects of treatments used in detail. Here we report an in-situ method to functionalize tetrahedral amorphous carbon (ta-C) thin films by introducing high purity oxygen into the vacuum chamber during the film fabrication at the end of the deposition process, effectively changing the surface chemistry. Furthermore, we report and compare the effects of post-treatment with nitric acid and oxygen plasma to untreated and in-situ functionalized tetrahedral amorphous carbon thin films. Using x-ray absorption spectroscopy (XAS), we show that introducing oxygen during deposition decreases the sp 2 content of the surface, accompanied by an increase in carboxyl-like functionalities. Subsequent oxygen plasma further decrease the sp 2 and ketone/aldehyde content and increase the amount of carboxyl groups. Here, the same trends are observed with reference ta-C under oxygen plasma treatment. For both materials, a concentrated nitric acid treatment has only a subtle effect, which follows the same trend as the oxygen plasma treatment. Using this knowledge, we can selectively produce materials with higher functional group surface loading than has been reported earlier, paving the way for application specific material fabrication.

42 ENGINEERING↗

Two-Level Switches for Advanced Time-Division Multiplexing

Superconducting quantum interference device (SQUID)-based time-division multiplexing (TDM) is a mature and widely implemented technology used to read out transition-edge sensor arrays. As the number of pixels in modern arrays continues to increase, a higher multiplexing factor is required to reduce the number of wires and amplifier channels. Yet, as the multiplexing factor is increased, the number of row-select wires (used to turn on a row of TDM SQUIDs in a two-dimensional configuration) also increases, limiting the reduction in array wires. We introduce a more advanced TDM architecture that enforces multi-level switching between subgroups of pixels. We show that this technique can dramatically reduce the number of required row-select lines. We also present the design, fabrication, and testing of a TDM multiplexer incorporating a two-level switch, which implements a second switch for each group of ten TDM pixels. In this application, a multiplexing factor of 100 can be addressed using ten group-select wiring pairs and ten row-select wiring pairs. We demonstrate multiplexer functionality and present measured operating margins of this new TDM multiplexer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Use of Transition Models to Design High Performance TESs for the LCLS-II Soft X-Ray Spectrometer

We are designing an array of transition-edge sensor (TES) microcalorimeters for a soft X-ray spectrometer at the Linac Coherent Light Source at SLAC National Accelerator Laboratory to coincide with upgrades to the free electron laser facility. The complete spectrometer will have 1000 TES pixels with energy resolution of 0.5 eV full-width at half-maximum (FWHM) for incident energies below 1 keV while maintaining pulse decay-time constants shorter than 100 μs. In the past, TES pixels have often been designed for a particular scientific application via a combination of simple scaling relations and trial-and-error experimentation with device geometry. We have improved upon this process by using our understanding of transition physics to guide TES design. Using the two-fluid approximation of the phase-slip line model for TES resistance, we observe how the geometry and critical temperature of a TES will affect the shape of the transition. We have used these techniques to design sensors with a critical temperature of 55 mK. The best sensors achieve an energy resolution of 0.75 eV FWHM at 1.25 keV. Building upon this result, we show how the next generation of sensors can be designed to reach our goal of 0.5 eV resolution.

47 OTHER INSTRUMENTATION↗