Search NASA⌕ Search

Engineering topics

Tolbert, Sarah

Publications and source records attributed to Tolbert, Sarah.

Thermally Insulating Transparent Barrier (THINNER) coatings on single pane windows

Conventional silica aerogel monoliths can provide remarkable thermal insulation but the presence of large pores (> 30 nm) tends to scatter visible light and render the material opaque or translucent instead of transparent. In addition, they are prone to cracking during synthesis and handling which makes them difficult to integrate in products and in particular in window solutions. This project developed two new solgel synthesis methods using silica precursors or preformed silica nanoparticles and ambient drying to produce mesoporous organo-silica monoliths. The monoliths were (i) thermally insulating, (ii) optically transparent, (iii) flexible, and (iv) hydrophobic. They feature porosity ranging from 50% to 90% with narrow pore size distribution with pore less than 20 nm resulting in excellent optical clarity (haze < 2%) and very low thermal conductivity (< 30 mW/mK). Interestingly, not only porosity but also pore size and mass fractal dimension were found to affect the thermal conductivity of the mesoporous silica. The superior transparency of the monoliths was shown to be attributed to dependent scattering among silica nanoparticles. Flexibility was achieved through trimethylchlorosilane surface modification. Furthermore, process scale-up and integration of the ambigel monoliths into window solutions using optically clear adhesives were also demonstrated in 6”x6” double-pane windows. The aerogel and the window solution were shown to be durable to accelerated aging under UV, moisture, and/or temperature gradient and thermal cycling. Overall, the window solution achieved the technical performance and the cost target of $10/sqft set for the SHIELD program. However, scaling to industry relevant scale (> 10’x10’) remains a challenge due to requirements on the drying process and fume hood size and to the propensity of large aerogel slab to crack during drying.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A fundamental look at electrocatalytic sulfur reduction reaction

The fundamental kinetics of the electrocatalytic sulfur reduction reaction (SRR), a complex 16-electron conversion process in lithium–sulfur batteries, is so far insufficiently explored. In this study, by directly profiling the activation energies in the multistep SRR, we reveal that the initial reduction of sulfur to the soluble polysulfides is relatively easy owing to the low activation energy, whereas the subsequent conversion of the polysulfides into the insoluble Li 2 S 2 /Li 2 S has a much higher activation energy, contributing to the accumulation of polysulfides and exacerbating the polysulfide shuttling effect. We use heteroatom-doped graphene as a model system to explore electrocatalytic SRR. We show that nitrogen and sulfur dual-doped graphene considerably reduces the activation energy to improve SRR kinetics. Density functional calculations confirm that the doping tunes the p-band centre of the active carbons for an optimal adsorption strength of intermediates and electroactivity. This study establishes electrocatalysis as a promising pathway to tackle the fundamental challenges facing lithium–sulfur batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoporous tin powder for energy applications

A nanoporous tin is disclose, along with a method of fabrication thereof, the tin having a hierarchical nanoporous and mesoporous ligament morphology that exhibits long-term cyclability, particularly when used as anode material in Li-ion. One embodiment of the present technology is a fabrication method to directly produce nanoporous tin in powder form, rather than a monolithic piece of nanoporous metal, so that the NP-Sn powder can be directly integrated into composite electrodes using commercial battery electrode processing techniques.

36 MATERIALS SCIENCE↗

Enhancement of voltage-controlled magnetic anisotropy through precise control of Mg insertion thickness at CoFeB|MgO interface

We studied the impact of different insertion layers (Ta, Pt, and Mg) at the CoFeB|MgO interface on voltage-controlled magnetic anisotropy (VCMA) effect and other magnetic properties. Inserting a very thin Mg layer of 0.1–0.3 nm yielded a VCMA coefficient of 100 fJ/V-m, more than 3 times higher than the average values of around 30 fJ/V-m reported in Ta|CoFeB|MgO-based structures. Ta and Pt insertion layers also showed a small improvement, yielding VCMA coefficients around 40 fJ/V-m. Electrical, magnetic, and X-ray diffraction results reveal that a Mg insertion layer of around 1.2 nm gives rise to the highest perpendicular magnetic anisotropy, saturation magnetization, as well as the best CoFe and MgO crystallinity. Other Mg insertion thicknesses give rise to either under- or over-oxidation of the CoFe|MgO interface; a strong over-oxidation of the CoFe layer leads to the maximum VCMA effect. These results show that precise control over the Mg insertion thickness and CoFe oxidation level at the CoFeB|MgO interface is crucial for the development of electric-field-controlled perpendicular magnetic tunnel junctions with low write voltage.

36 MATERIALS SCIENCE↗

Basic Research Needs Workshop on Synthesis Science for Energy Relevant Technology

The technology that lies at our fingertips becomes more powerful each day. Smartphones connect us instantly to family, friends, and co-workers around the globe; give us access to a limitless stream of information; control the heating in our homes; and serve as our cameras, calculators, flashlights, music players, boarding passes and, on occasion, our phones. Cars are ever more fuel-efficient, safer, semi-autonomous, and have more computing power than the systems that guided humankind to the moon. LED lighting and solar panels are becoming commonplace, replacing less efficient technologies and expanding the energy options available worldwide. Novel polymers and nanoparticles are playing a crucial role in enhanced oil recovery. None of these advances would have been possible without the discovery and development of, and ability to create, new materials and chemical processes. Now imagine what our world would be like if we could accelerate those discoveries a thousandfold. What if the only limit to synthesizing new forms of matter were the imagination? We could build complex assemblies of atoms and molecules with architectures and capabilities far exceeding those of materials found in nature—for example, develop catalysts that turn garbage into fuels, design solar cells to power our homes directly from sunlight, make batteries with the energy density of gasoline, and create one- and two-dimensional solids that transport charge hundreds of times faster than silicon or allow us to build quantum bits based on the spins of electrons or photons to realize the promise of “beyond Moore’s law” computing. Advances in synthesis science are required to bring about this future—we not only must know how to design new molecules and materials with desired functions and properties through theory and computational techniques; we also must be able to make the materials we envision. New approaches to discovering as yet unimagined matter require a sea change in the way we think about the science of synthesis. Chemical and materials sciences have traditionally focused on understanding structure–function relationships with the goal of predicting where the atoms should be placed to achieve a targeted property or process. Much less effort has been directed toward a predictive science of synthesis—understanding how to get the atoms where they need to go to achieve the desired structure. This report, which is the result of the Basic Energy Sciences Workshop on Basic Research Needs for Synthesis Science for Energy Technologies, lays out the scientific challenges and opportunities in synthesis science. The workshop was attended by more than 100 leading national and international scientific experts. Its five topical and two crosscutting panels identified four priority research directions (PRDs) for realizing the vision of predictive, science-directed synthesis.

99 GENERAL AND MISCELLANEOUS↗